Setting the corner I-beam posts reminded me almost exactly of setting posts in stone for the trellises we built last spring (with cement). We also used string and were very precise as the end posts set the stage for the line posts that went in later. The majority were pounded 4' into dirt, plumbed as went along. We to have a similarly constructed fully enclosed shed that can fit (footprint) 6 vehicles, but set up for three as the additional space has a full bath, kitchen and utility room in one corner. Three big doors and two man (sized) doors. That's a nice carport though, slab and some siding would help shelter the equipment
I love your videos! I used to live in Oklahoma and now in Cali...I'll be moving with my dad to Alaska soon! We are going to build up our family homestead...your videos are just amazing, I'm learning new ways to do lots of stuff, thanks! :)
It's a BEAUTY! Something to hold up to the elements trouble-free and shelter equipment/cars for the next 40-50 years. My dad contracted a building in the 1970's. People who looked at it said it was the best manufacturer (=Ludwig?) Anyhow it was three times the sq. ft. and the materials were not half the strength of yours. You got a bargain!
I know it's considered "rude" to ask, but roughly how much did that cost you? (I'd be interested in getting one of those, but have no idea whether we're talking closer to $2k or $20k...)
When they made the pie cuts on the ibeams with the 3/12 pitch, how long were the ibeams to begin with? How much did you lose in feet on the span? Was it originally gonna be 25x25’
+Les “Porkchop” Smithfield Yes... I did build a shed for it...very observant. I think this will be it's "winter home"... I'll find something else to put under the shed :)
I was looking for some I beams today and its hard to tell what people use on here. I was told to use 12" x 14lb for my application at the Metal place. I am building a Truss for a 40" wide roof with R panels and Cee's.
I think these were 10"X8lb... but not sure. I may mention it in the video if you want to go back and listen close. For a 40' span, the size will probably be larger.
@@BIGALTX 5 years ago I was here and now looking again for an upcoming project. I am thinking on building a 24x30 foot car port to store my trucks and new tractor.
I'm just curious if anybody knows how long this will last ie thinking fail points maybe the steal beam in concrete seamingly lower than the dirt. . How long would it take to rust and cause this building to fall over if no maintenance is done? I'm thinking I want to build something like this but wouldn't it be better to do some sort of pier and J bolts. Not sure how long this method will hold up? My guess is 20 years ?? As such a small build but i plan to do a larger port.. Any experienced builders doing metal like this reading this, can you guess?
I’m not that experienced in building metal buildings, but I would imagine as thick as the beams are, it would last for many decades. Much longer than I’m going to be around 😊
Would love to see how much room you have with the truck and tractor under it. I am about to do a metal building with two 21' garage bays and an 18' living space bay.
That polycarbonate roofing will last about 15 years then it will get brittle and hail will knock holes in it. That stuff is expensive almost cost prohibitive when you consider how much it costs compared to galvalume or other metal roofing.
I would have measured the beams and cut off 3 feet before setting in hole then just line up the string line to 10 ft mark ,although those beams are heavier than 4x4 tubing...great work,by real craftsman..quality work..
Looks great. Now you need some florescent shop lights, ceiling fans and electric outlets on every post. Then you can have your party. LOL Oh, yeah, and build a stage for the band.
$4200 for the structure and $2000 for the concrete pad. But, concrete and metal has gone up since then, so it'll probably be 10-20% or more higher now.
@@BIGALTX thank you for your help I'm looking to get someone to install for me but I'm over in Australia and wanted to compare something your size over here would be $12000 to $15000AUD so USD $8251 to $10313. Crazy. We sell our minerals to China and buy the steel back at stupid prices. Thanks again for the information.
Looks awesome but one thing i saw was that the I beam post weren't painted before you put the concrete in. I made this mistake and I had to redo a post. Concrete has acid that will eat away at the metal faster than water. They should of known that but mine was 3/8inch thick I beam and it ate threw it in 12 years. There is a paper you put around it to help it last longer. Im not criticizing just something i noticed. Very awesome building though
yesenia moreno if steel in contact with concrete was a pervasive problem, then rebar wouldn't be such a corrosion-prone alloy of steel; your theory isn't quite right.
You can't be much more wrong. Concrete is very alkaline ph level is around 13 and high alkaline protects steel from corrosion. I bet reason for corrosion was that between beam and concrete was small cavity which was filled with water each time rain and it hold moisture which helps steel to corrode.
@5:15 you say "at the end of it I'll let you know what all this is costing, okay." but you never do. I did read in the comments you said it cost you $4,200 without a slab. You might want to add that info to your video description.
doing it @@BIGALTX that is a great deal. I just paid 1650.00 for a 20x 20 mueller, not near as stout, f the guy they recommended to install it wants 1500.. im not paying that. I will hire someone to help me. wish these guy were in central texas. how much did they charge to do the stumps?
ooops sorry, this will now keep it on the point.... steel I or h-beams for just a carport? is this for hurricane/tornado areas or the contractor overkilling the job?
It's not the point if you like it or not, or if its just the way he builds.. We're not here to say he's stupid, dumb, insane, or anything else that's negative. Our point is that it's overkill to make a carport out of I-beams but if the owner doesn't care how much extra he spends to have it this way verses a much more inexpensive way that would be just as sturdy, he can do what he wants.
You sound like you are a rep for a thin-walled tubing "carport" company. If not, I'd like to hear how you think he could have gotten the same features (clear span on all four sides, structural integrity, hot-rolled steel frames with cold-formed, likely 12ga. pre-primed purlins) for a lesser price. If you aren't a cheap carport rep, then you are just making an assumption that TP2 paid more. Try comparing what he paid to the cost of materials and installation labor for a true pole barn - 8x8 square wooden posts at 12' o.c. with 1 1/4x1 1/4 x1/8" angle "joists/truss" rafters with 2x6's for purlins. TP2 got a lot more structural integrity, plus the clear span feature on ALL four sides (can drive where ever he wants from all sides without having to worry about hitting a post), for less than what a wooden pole barn would cost. You cannot achieve this with wood, sectional thin-walled tubed steel like versatube, Carolina carports, etc. I can buy a 12" channel the length he used cheaper than I can buy the longest 2x12, which by the way, would be too short for this building. So, one would have to resort to laminated beams (wood) or putting in additional rafters. More cost. Also, I can buy a W8 for less than an 8x8 square wooden post from the lumber store. So, what TP2 got was not only what he wanted, it was more economical and structurally sound while using fewer parts and pieces (translates into faster install time)....and installed for him. And, like you said, he can do whatever he wants because it's his and he likes it. But, let's not imply any negativity in your envy.
Im close to dallas tx myself but the men that did my foundation piers and also put my wrought iron fencing in said 4 foot for fencing so I just figured yours would need much more
No surface treatment to the posts before casting into the concrete! I would have laid the slab first, then used chem anchors to fix the posts to the slab. Anyhow, should stand for years to come.
MR MIKES GUNRACK How much are you paying for gasoline now 7-10-16 ? I'm in central Oklahoma . regular w/ 10% ethanol is 1.89 & without ethanol is 2.09 .
On regular 'corrugated metal' .... Yes. Not on R-Panel sheets. The 'ridges' are well over an inch high (more like 1 1/2"). This type of metal is made to screw on the 'flats'.
i dont know why do people hate on texas! met many people from there who are really great and kind.
this video helped me a lot ! thanks a dozen
Thanks for the video. I'm barely starting my mobile welding business and was curious on how these structures are built. These guys did an awesome job.
Trust in Jesus Christ
love how solid this building is, can not go wrong, im in australia and that price is a gift!!! i would kill for a carport built like this!!!!
Thanks.I guess we take some things for granted around here.
You can build your own if you know how to weld and work with metals. Oh and 1 or 2 helpers.
Where in Texas are Kiwi construction? Do they do work in Terrell TX? Thanks! Nice build!!
Nice job, I would like to find someone I can hire to do this, can you suggest where I would look? ask at the metal iron store for reference's maybe.
That would probably be a good place to start.
They should know someone that would do you a good job.
Setting the corner I-beam posts reminded me almost exactly of setting posts in stone for the trellises we built last spring (with cement). We also used string and were very precise as the end posts set the stage for the line posts that went in later. The majority were pounded 4' into dirt, plumbed as went along.
We to have a similarly constructed fully enclosed shed that can fit (footprint) 6 vehicles, but set up for three as the additional space has a full bath, kitchen and utility room in one corner. Three big doors and two man (sized) doors.
That's a nice carport though, slab and some siding would help shelter the equipment
Trust in Jesus Christ
I love your videos! I used to live in Oklahoma and now in Cali...I'll be moving with my dad to Alaska soon! We are going to build up our family homestead...your videos are just amazing, I'm learning new ways to do lots of stuff, thanks! :)
Trust in Jesus Christ
It's a BEAUTY! Something to hold up to the elements trouble-free and shelter equipment/cars for the next 40-50 years. My dad contracted a building in the 1970's. People who looked at it said it was the best manufacturer (=Ludwig?) Anyhow it was three times the sq. ft. and the materials were not half the strength of yours. You got a bargain!
moreno what type of paper do you use on metal post ??. also what is the depth of the hole in the ground ?
Those welds on the post and truss are rough as hell they coulda cleaned them up a bit. Overall looks good
I was honestly impressed up to the point where I saw the welds.... regardless it is a very nice product
👍
I know it's considered "rude" to ask, but roughly how much did that cost you? (I'd be interested in getting one of those, but have no idea whether we're talking closer to $2k or $20k...)
I would like to know as well, to budget for a future project.
+Barclay's Mommy, Donna It was $4300. If I get a slab poured, it will be another $2500 or so...
+KA5IVR
It was $4300. If I get a slab poured, it will be another $2500 or so...
Thanks... It'll help with my budgeting!!!
+Barclay's Mommy, Donna Thanks for asking. Was just going to do the same.
Hey very nice carport but you forgot to mention how much it cost you for all labor and material???
The structure was about $4200. The slab was $2000.
However…
That was a long time ago and metal and concrete are a lot more expensive now.
Awesome !! How much was that, If you don’t mind?
About $4200 for the structure and $2000 for the slab
What did that cost to build? Very well built!
Around $4200
Slab was $2000
Probably much more expensive now.
2:05 how u bend that thing
He cut a "V" out of it and then bent the top (that was not cut) by heating it up.
@@BIGALTX i mean how he bent that is so big. At least show Me the way to do it
Whats tools is use to bent that thing
I know its cut a V. But its stills hard to bent
I can't show you how they did it.
I think they applied heat to the top of the beam (after cutting the notch) and it bent easily.
Where did you get the blueprints to build this. I would like to do the same thing.
I didn't build it.
I hired a company to build it.
Cant beat the price for the quality. Looks great!
When they Heated & bent the I-Beams, did they use a Come A Long? Or by hand?
Just by hand
Very nice, I'm looking to get an enclosed garage and carport built. May I ask who you had build it?
A company in ETX.
KIWI Construction
Could you ask them if they can refer me to someone in Oregon?
Looks good. Now I want one. 👍
We still love it :)
Una pregunta se nesesita sacar permiso al condado para instalar un carbo en una casa
lo depende, los condados son diferente. Algo si, algo no, necesitas preguntar el condado donde vives
Did you guys use a pigeon to weld that?
When they made the pie cuts on the ibeams with the 3/12 pitch, how long were the ibeams to begin with? How much did you lose in feet on the span? Was it originally gonna be 25x25’
Man, I really don't know.
I just watched them, I didn't help at all.
But yes, it was always planned to be 25'X25'
I'm sorry, did you mention somewhere about how much this cost? Thanks
The metal structure cost about $4200
The concrete slab was $2000
Metal is higher now and so is concrete
Didn't your already build your tractor a home behind your refurbished shed? Did you get a second tractor to keep the other one company?
+Les “Porkchop” Smithfield Yes... I did build a shed for it...very observant.
I think this will be it's "winter home"... I'll find something else to put under the shed :)
I was looking for some I beams today and its hard to tell what people use on here. I was told to use 12" x 14lb for my application at the Metal place. I am building a Truss for a 40" wide roof with R panels and Cee's.
I think these were 10"X8lb... but not sure.
I may mention it in the video if you want to go back and listen close.
For a 40' span, the size will probably be larger.
@@BIGALTX 5 years ago I was here and now looking again for an upcoming project. I am thinking on building a 24x30 foot car port to store my trucks and new tractor.
Never mentioned price like you said. Mind sharing that?
I think it was $4200 without the slab.
@@BIGALTX ty. I ended up doing an addition to the garage.
Was it 4300 with or without the materials
$4200 total for bldg.
$2000 for slab
Very nice and really heavy duty!
how did they get that I beam to bend after they heated that joint?
They didn't just heat it... They cut a chunk of it out... heated it... then bent it.
Watch again starting at :53 seconds
Oh I've watched it twice, I'm just wondering how they got it to bend, after they cut the chunk and after they heated it? Thank you!
Heating the "top" of the beam makes it soft enough to bend
Good job body, thank you for taking the effort by recording the whole process.God bless .
I got the impression that those guys have done that before. Looks real nice.
I'm just curious if anybody knows how long this will last ie thinking fail points maybe the steal beam in concrete seamingly lower than the dirt. . How long would it take to rust and cause this building to fall over if no maintenance is done? I'm thinking I want to build something like this but wouldn't it be better to do some sort of pier and J bolts. Not sure how long this method will hold up? My guess is 20 years ?? As such a small build but i plan to do a larger port.. Any experienced builders doing metal like this reading this, can you guess?
I’m not that experienced in building metal buildings, but I would imagine as thick as the beams are, it would last for many decades. Much longer than I’m going to be around 😊
Yah think so also.?. We do galvinized post with solar so was curious what people think with this sort of structure.
what did they use to cut the tin?
Tin snips I reckon
what size purlins and gauge?
I don't know about the perlins.
The R-Panel metal is 26ga
How deep are the holes for the posts?
I think they were 3 feet.
Would love to see how much room you have with the truck and tractor under it. I am about to do a metal building with two 21' garage bays and an 18' living space bay.
How deep did they dig the hole for the i beams
I think they were 3 feet deep.
@@BIGALTX awsome thank you!
I really like this design using thick steel vs. light gauge metal framing, Great job....Dave
Thank you very much!
How much did it cost?
+gertzadik It was $4300. If I get a slab poured, it will be another $2500 or so...
@@BIGALTX DANG, 8 years ago pricing. WHEW
Where in Texas? I need something a little bigger North of Waco.
He's in Smith County.
I don't think he goes that far from home
Thanks for the speedy response. Nice pavillion aka carport.
That polycarbonate roofing will last about 15 years then it will get brittle and hail will knock holes in it. That stuff is expensive almost cost prohibitive when you consider how much it costs compared to galvalume or other metal roofing.
This is all 26 gauge galvalume
That is a really nice carport. I heard you say you would say the cost of it, I guess I missed that. Would you share the cost for that. Good video.
The cost was $4200 for the carport and about $2000 for the slab.
Probably higher now since metal and concrete has gone up.
looks great and the price was good too
How much was it?
I would have measured the beams and cut off 3 feet before setting in hole then just line up the string line to 10 ft mark ,although those beams are heavier than 4x4 tubing...great work,by real craftsman..quality work..
Thanks!
Very Nice ! Tickled for ya !
Great workmanship! What was the total cost?
The structure was $4200 and the slab was $2000
But, I understand all those materials have gone up a LOT since then
Heavy duty, should have mixed concrete before adding it. Other than that awesome video
Thanks for sharing TP2! Looks great. Sharing this with the hubby :)
Thanks for the sharing, i really like your solution
Looks great. Now you need some florescent shop lights, ceiling fans and electric outlets on every post. Then you can have your party. LOL Oh, yeah, and build a stage for the band.
+BC ElginTex That's the plan !
Looks nice! Thanks for sharing.
Nevermind!! Just saw that it shows on your title photo. Thanks!
Can you please tell me what the total cost was.
$4200 for the structure and $2000 for the concrete pad.
But, concrete and metal has gone up since then, so it'll probably be 10-20% or more higher now.
@@BIGALTX thank you for your help I'm looking to get someone to install for me but I'm over in Australia and wanted to compare something your size over here would be $12000 to $15000AUD so USD $8251 to $10313. Crazy. We sell our minerals to China and buy the steel back at stupid prices. Thanks again for the information.
the rainwater is just gonna sit around the steal beam?
I'm on a slight slope... Nothing sits around very long
thanks for showing this! looks good
Looks awesome but one thing i saw was that the I beam post weren't painted before you put the concrete in. I made this mistake and I had to redo a post. Concrete has acid that will eat away at the metal faster than water. They should of known that but mine was 3/8inch thick I beam and it ate threw it in 12 years. There is a paper you put around it to help it last longer. Im not criticizing just something i noticed. Very awesome building though
You may have used calcium chloride to speed up setting. That is no longer used in concrete that I'm aware of.
they still use it up north in Ohio in the winter
yesenia moreno
if steel in contact with concrete was a pervasive problem, then rebar wouldn't be such a corrosion-prone alloy of steel; your theory isn't quite right.
You can't be much more wrong. Concrete is very alkaline ph level is around 13 and high alkaline protects steel from corrosion.
I bet reason for corrosion was that between beam and concrete was small cavity which was filled with water each time rain and it hold moisture which helps steel to corrode.
Great job. I want one!
I want ANOTHER one !
:)
@@BIGALTX I'll build you one...
@@BIGALTX what did it cost you?
@@lance3883
Around $4200 for building
$2000 for slab
@@BIGALTX did the 4200 include material?
What size in inches???? the C channel.
8 inches purlin????
I didn't get up on the ladder to measure... but they look like 8" C-channel
@5:15 you say "at the end of it I'll let you know what all this is costing, okay."
but you never do.
I did read in the comments you said it cost you $4,200 without a slab. You might want to add that info to your video description.
Thanks for reminding me. Yes, I really need to go back and do that. Thanks for watching.
THOSE GUYS TAKE PRIDE IN THIER WORK!!! how much did it cost?
$4200 for the structure
$2000 for the concrete slab
Would probably cost more today. Materials have gone up
doing it @@BIGALTX that is a great deal. I just paid 1650.00 for a 20x 20 mueller, not near as stout, f the guy they recommended to install it wants 1500.. im not paying that. I will hire someone to help me. wish these guy were in central texas. how much did they charge to do the stumps?
How much does something like that cost to build
This one was around $4200 and the slab was another $2000
$4300 was for labor only right? What was the material expenses?
+banker1224
$4300 total... material and labor :)
Very nice...thanks for sharing!
Are they just local?
+Claudette Faglie Probably only serve East Texas. He has 3 crews...
thanks... would love to have one of those.
What was the cost?
$4200 Materials and Labor
$2000 Concrete Slab
Love the work! who was the company who built it?
+Michael Jenkins
Kiwi Construction
great video!! thanks
Very nice that's all kinds of handy. God bless buddy
industrial grade steel I-beams for just a carport? is this for hurricane/tornado areas or the contractor overkilling the job?
+Journey4Sure Knowledge-N-Wisdom
These are MUCH thinner steel than an industrial beam.
ooops sorry, this will now keep it on the point.... steel I or h-beams for just a carport? is this for hurricane/tornado areas or the contractor overkilling the job?
+Journey4Sure Knowledge-N-Wisdom
Overkill...?
Don't know. That's just the way he builds.
I like it !
It's not the point if you like it or not, or if its just the way he builds..
We're not here to say he's stupid, dumb, insane, or anything else that's negative. Our point is that it's overkill to make a carport out of I-beams but if the owner doesn't care how much extra he spends to have it this way verses a much more inexpensive way that would be just as sturdy, he can do what he wants.
You sound like you are a rep for a thin-walled tubing "carport" company. If not, I'd like to hear how you think he could have gotten the same features (clear span on all four sides, structural integrity, hot-rolled steel frames with cold-formed, likely 12ga. pre-primed purlins) for a lesser price. If you aren't a cheap carport rep, then you are just making an assumption that TP2 paid more.
Try comparing what he paid to the cost of materials and installation labor for a true pole barn - 8x8 square wooden posts at 12' o.c. with 1 1/4x1 1/4 x1/8" angle "joists/truss" rafters with 2x6's for purlins.
TP2 got a lot more structural integrity, plus the clear span feature on ALL four sides (can drive where ever he wants from all sides without having to worry about hitting a post), for less than what a wooden pole barn would cost. You cannot achieve this with wood, sectional thin-walled tubed steel like versatube, Carolina carports, etc.
I can buy a 12" channel the length he used cheaper than I can buy the longest 2x12, which by the way, would be too short for this building. So, one would have to resort to laminated beams (wood) or putting in additional rafters. More cost. Also, I can buy a W8 for less than an 8x8 square wooden post from the lumber store.
So, what TP2 got was not only what he wanted, it was more economical and structurally sound while using fewer parts and pieces (translates into faster install time)....and installed for him. And, like you said, he can do whatever he wants because it's his and he likes it.
But, let's not imply any negativity in your envy.
my iron fence posts are 4 ft deep.. just an observation but id get them deeper
+Jack Burton Around here... 3' is plenty deep... we don't have a 'frost line' ...etc.
Many folks only go 2' deep on some projects.
Im close to dallas tx myself but the men that did my foundation piers and also put my wrought iron fencing in said 4 foot for fencing so I just figured yours would need much more
I'm in Carrollton TX and I went 4' deep with maximizer concrete. I welded railroad spikes to the bottom posts and it should outlast me and my house.
sounds like a plan
The carport concept seems to be popular further south than I am. I'm thinking that would make a beautiful sawmill "port".
+777strongcoffee I have an enclosed garage that is attached to my house, but this is for parking other stuff in...
awsome stuff
That is a great price for such a long lasting port.
what was the price? I didnt hear it ?
I could use a few of those. I'm jealous. :)
Thanks for doing this video I am going to give your builder a call.
Great!
Can you let me know the business who did the construction for you? I might like to hire them.
+Larry Sherrod
Kiwi Construction
So how much?
Around $4200
Very nice car port there. Glad to hear you're tickled as well. Did you forget to mention how much this was?? :) Just being nosy.
+Old Pup I can't believe I forgot to tell the price... It was $4300. If I get a slab poured, it will be another $2500 or so...
Not bad really. Thanks for letting me know.
how much overall costs?
$4200 for building
$2000 for concrete slab
Okay, now I'm interested. I need a couple of the same thing. Can you direct me to someone in the northwest? Sweet.
No... sorry.
I don't know anyone in the northwest.
Looks awesome!
Would you please send me the contact info for the guys that created your building...looks like just what I'd like to have.
www.kiwiconstructiontx.com/
He's pretty much just ETX... Hope you can use him. Nice guy.
Tell him I sent you.
He's from New Zealand, mate !
:)
No surface treatment to the posts before casting into the concrete! I would have laid the slab first, then used chem anchors to fix the posts to the slab. Anyhow, should stand for years to come.
Already comes prerusted!
Very nice
looks great
That's heavy duty .
4300$ is really cheap! the permits alone are 2200$ for the one I wanted to put up in Washington state.
+MR MIKES GUNRACK
NO permits here in rural ETX :)
+MR MIKES GUNRACK& WOW ! That is huge for permit cost ! It's right down prohibitive . Is that with in a city limits or rural ?
+MR MIKES GUNRACK You're a free citizen
Its county. But Washington in general is really expensive. Plus its in view of the county road so I can't get away with anything.
MR MIKES GUNRACK How much are you paying for gasoline now 7-10-16 ? I'm in central Oklahoma . regular w/ 10% ethanol is 1.89 & without ethanol is 2.09 .
11:33 I thought the screws should go in the ridges of the roof sheet, not the valleys.
On regular 'corrugated metal' .... Yes.
Not on R-Panel sheets. The 'ridges' are well over an inch high (more like 1 1/2").
This type of metal is made to screw on the 'flats'.
OK, thanks, there would definitely be advantages to doing it that way, if the water seal was OK.
I didn't hear that price you promised to share. $$$?
$4200 for the carport and around $2000 for the slab.
TexasPrepper2 Is it possible to enclose it all later on if you wanted to?
You never said how much it cost for the project
$4200 for the construction and $2000 for the slab.
25'X25'
@@BIGALTX thank you
Wow! That baby's not going anywhere!!
They should have pre-mixed the concrete before pouring into the hole.
interesting way to mix concrete
I didn't catch the price
Metal carport= $4200
Slab=$2000
@@BIGALTX Wow. Very nice. Good video.
Gorgeous
Concrete has gotten EXPENSIVE in the last 10 or 12 yrs.
Yep... it's ridiculous
I do not think that was their first building. Nice
More like their third Rick
you really scored TPT2
you never gave the price like you said you would?
Structure was about $4200
Slab was $2000