Yikes. Found this video because I’m heading to get the same bike end of week. Been a long time coming and a ton of research. Finally I settled on this bike and company. Granted I’m not gonna beat it like you do. But I’ll enjoy it thoroughly every weekend in the single tracks. Man I’ve worked hard to be able to buy this cash in hand. With wife and kids blue collar life it’s hard. But finally it’s money can’t wait.
Estoy totalmente en desacuerdo con la última parte! Siempre es bueno volver a intentarlo y superarse uno mismo, suerte con tu motor espero que no sea nada grave, saludos desde argentina
Great, honest reviews. Really bad luck mate, Don't let it get you down. I sent my ecu to Rex, he's great to deal with but to be honest the difference it made to my 21 Fe 350 wasn't that pronounced. I love the 350 platform but I'm going to try a 300 2 stroke next. Keep up with the reviews. Cheers.
Thanks for the comment mate, that’s a shame about the ECU tune, initially I didn’t notice much difference except for how much easier the bike started, but once I was doing some steep climbs is where I really noticed the difference. I also think ol I’ll be on a 300 two stroke next
The 350 is the best 4t platform for hard enduro, for sure. You might find wheelies on a 300 2t are still plenty easy though ;-) Chin up about the engine, hope you get through without too much cost!
I agree 100% about the 350 being the best haha, yeah I’m sure I’ll also get a 300 2t one day, it’s just the lack of engine braking that I would need to get used to when doing wheelies. Thanks for the comment mate!
Love the videos. I have always had a 2T; seeing your videos doing hard enduro on a 4T wants me trying one in the future. Specially was you mentioned that everyone now is on a 2T for hard enduro. But check what Jaime Busto does on his 4T haha. He is a pro I know but 4T are super cool too. Keep up the great videos
I was enjoying this vid right up to the drowning of the bike part. I hope the rebuild goes well. I've got an ec250f with 65 hrs on it and might do that oil pump gear upgrade too.
Mate drowned his Husky fe250- no damage, sucked water while riding though a river and stalled. Yamahas higher air intake is great for deeper crossing as long as the bikes upright of course.
Shinko 505 is better than the 525. Grip is just as good and wear is much better. Use a SXF full exhaust. Much better clearance at the front and a bit more grunt. You need to make a new mid bracket to suit. I bought mine off a MX rider for $150. The removed flap on the airbox may have contributed to the drowning. I'm leaving mine in for the moment. I know of a TE350 that drowned and bent a rod on the first ride. Unfortunately it does happen. The ECU tune from Rex is great, more power and better stall resistance.
yeah I have thought about putting a motocross exhaust setup on it but wasn't sure if id lose that low down grunt from the longer header pipe on the enduro. ill probably try the 505 shinko next. thanks for the comment mate!
The SXF exhaust didbn't affect the bottom end that I noticed. It does have the power bulge perhaps that compensates for the shorter header. It is louder but not offensive. I'm considering grafting the longer EC muffler onto the end but haven't bothered yet. I'm much happier with the lack of dents though. My EC header is pretty ugly.
Yikes. Found this video because I’m heading to get the same bike end of week. Been a long time coming and a ton of research. Finally I settled on this bike and company. Granted I’m not gonna beat it like you do. But I’ll enjoy it thoroughly every weekend in the single tracks. Man I’ve worked hard to be able to buy this cash in hand. With wife and kids blue collar life it’s hard. But finally it’s money can’t wait.
Great video as always Jack, that's bad luck about the motor mate.
thanks for watching mate! these things happen haha
Estoy totalmente en desacuerdo con la última parte! Siempre es bueno volver a intentarlo y superarse uno mismo, suerte con tu motor espero que no sea nada grave, saludos desde argentina
Great, honest reviews. Really bad luck mate, Don't let it get you down. I sent my ecu to Rex, he's great to deal with but to be honest the difference it made to my 21 Fe 350 wasn't that pronounced. I love the 350 platform but I'm going to try a 300 2 stroke next. Keep up with the reviews. Cheers.
Thanks for the comment mate, that’s a shame about the ECU tune, initially I didn’t notice much difference except for how much easier the bike started, but once I was doing some steep climbs is where I really noticed the difference. I also think ol I’ll be on a 300 two stroke next
When you buy the plastik kit they don’t came with the graphik kit ? Thank’s
The 350 is the best 4t platform for hard enduro, for sure. You might find wheelies on a 300 2t are still plenty easy though ;-)
Chin up about the engine, hope you get through without too much cost!
I agree 100% about the 350 being the best haha, yeah I’m sure I’ll also get a 300 2t one day, it’s just the lack of engine braking that I would need to get used to when doing wheelies. Thanks for the comment mate!
@@jackkellybuilds Think of it as forced training to cover the rear brake 😁
Good point haha
Love the videos. I have always had a 2T; seeing your videos doing hard enduro on a 4T wants me trying one in the future. Specially was you mentioned that everyone now is on a 2T for hard enduro. But check what Jaime Busto does on his 4T haha. He is a pro I know but 4T are super cool too.
Keep up the great videos
I'm a big fan of the 4T, thanks for watching!
I was enjoying this vid right up to the drowning of the bike part. I hope the rebuild goes well.
I've got an ec250f with 65 hrs on it and might do that oil pump gear upgrade too.
Im glad you enjoyed the video, even if the end was a bummer haha. the oil pump gear upgrade is cheap and easy enough to do, so might as well!
wounder ! good luck fella
thanks mate!
Better bent bars than busted support castings.. hard to ride with bluetooth bars after castings break..
That sucks man. But I’m subscribed to see how you go coz I kind of feel like I’ll be there one day myself.
It happens to the best of us haha, thanks for the sub!
what is the year of the bike,
Mate drowned his Husky fe250- no damage, sucked water while riding though a river and stalled. Yamahas higher air intake is great for deeper crossing as long as the bikes upright of course.
too bad I wasn't as lucky as your mate haha. yeah the high up airbox wouldn't have helped too much in my situation anyway, bike went completely under
$350 sounds cheap for ECU
where did you buy it?
$350 to tune the stock ECU, which I sent to Rex at "Fuel Torque" and then he sent it back with with the new mapping
Back on the rmx!!!
I sold that bad boy a while back now, but I’m sure the new owner is having a better time than me right now haha
Renthal twinwall 996 is very strong handlebar, it should be a good option :)
Thanks for the suggestion!
Bad luck man, may not have been so bad on a 300, but they bring their own set of problems as well. Hope the rebuild doesn't cost to much
I hope it doesn't cost too much either haha, probably going to cost me around $1300 I think. thanks for the comment!
But how much does the metal oil pump gear weigh , plastic oil pump gear , gear not important really. Shockers they are .
I don't know how much it weighs but the added reliability is worth it in my opinion
Shinko 505 is better than the 525. Grip is just as good and wear is much better. Use a SXF full exhaust. Much better clearance at the front and a bit more grunt. You need to make a new mid bracket to suit. I bought mine off a MX rider for $150. The removed flap on the airbox may have contributed to the drowning. I'm leaving mine in for the moment. I know of a TE350 that drowned and bent a rod on the first ride. Unfortunately it does happen. The ECU tune from Rex is great, more power and better stall resistance.
yeah I have thought about putting a motocross exhaust setup on it but wasn't sure if id lose that low down grunt from the longer header pipe on the enduro. ill probably try the 505 shinko next. thanks for the comment mate!
The SXF exhaust didbn't affect the bottom end that I noticed. It does have the power bulge perhaps that compensates for the shorter header. It is louder but not offensive. I'm considering grafting the longer EC muffler onto the end but haven't bothered yet. I'm much happier with the lack of dents though. My EC header is pretty ugly.
@@geedubone ill look into getting one then, I think I saw a full stock sxf setup the other day for $150
Get a 150 there really gd but that’s if ur keeping the 350 if not get a newer 350 there just really gd
ill stick with the 350 for now once I fix it, but I may Get a 300 in the future, I haven't decided yet