I have a Grandstream UCM6304 installed in my office, but only two FXO ports are functional. Ports 3 and 4 are working, whereas ports 1 and 2 have burned out. Now, I want to connect a Grandstream HT881 to the UCM6304 so that I can use a total of 8 lines. Please guide me with the configuration. Thank you.
Dear, here is a problem >>we are not able to call outside using specific fxo port . I am using HT818 as gateway terminated 8 fxo line (DID) and IPBX 6300A.Made SIP trunk between HT818 to IPBX 6300A.Trunk is working fine also incoming and outgoing is happening. But problem is we are not able to use respective fxo port which calling outside .for example created extension from 1000 to 1010 & 2000 to 2001 & 3000 to 3010 & so on .When i will call outside from 1000 it must use fxo 1 port and when i will call outside from 2000 it should use fxo2 port & when i will call 3000 it must use fxo3.If you have any Idia pls suggest ,
Hi, You need to create voip trunk in UCM for each port of HT881. 1. Firstly upgrade the firmware of HT881 to latest one 2. Change the SIP port of FXS profile to 8060. 3. Changed the sip port of FXO profile to 5060. 4. Now the FXO ports are as below. FXO 1 -- 5060 FXO 2 -- 5062 FXO 3 -- 5064 FXO 4 -- 5066 FXO 5 -- 5068 FXO 6 -- 5070 FXO 7 -- 5072 FXO 8 -- 5074
Hi, Since I am using one pstn and if switch to fxo2 then also call working. I am assuming, you want to call using specific ports. Then you need to create seperate sip trunk in ucm port wise for HT8X1.
I have a Grandstream UCM6304 installed in my office, but only two FXO ports are functional. Ports 3 and 4 are working, whereas ports 1 and 2 have burned out. Now, I want to connect a Grandstream HT881 to the UCM6304 so that I can use a total of 8 lines. Please guide me with the configuration. Thank you.
You can follow this video or if you need remote support ( paid) then mail me at voipknowledge2023@gmail.com.
Thank you so much. This video saved my project
Thanks for watching this video.
Have a nice day
Dear, here is a problem >>we are not able to call outside using specific fxo port .
I am using HT818 as gateway terminated 8 fxo line (DID) and IPBX 6300A.Made SIP trunk between HT818 to IPBX 6300A.Trunk is working fine also incoming and outgoing is happening. But problem is we are not able to use respective fxo port which calling outside .for example created extension from 1000 to 1010 & 2000 to 2001 & 3000 to 3010 & so on .When i will call outside from 1000 it must use fxo 1 port and when i will call outside from 2000 it should use fxo2 port & when i will call 3000 it must use fxo3.If you have any Idia pls suggest ,
Hi,
You need to create voip trunk in UCM for each port of HT881.
1. Firstly upgrade the firmware of HT881 to latest one
2. Change the SIP port of FXS profile to 8060.
3. Changed the sip port of FXO profile to 5060.
4. Now the FXO ports are as below.
FXO 1 -- 5060
FXO 2 -- 5062
FXO 3 -- 5064
FXO 4 -- 5066
FXO 5 -- 5068
FXO 6 -- 5070
FXO 7 -- 5072
FXO 8 -- 5074
I configured the following step. but Outgoing call not working.
Can you confirm me the firmware version of HT841
Hello what is 901 and 902 number in configiration?
Hi,
901 and 902 are the ucm extension,
When I make a call through ht881, do I have to dial the extension 901 and then the external number?
No, you need to dial the external number directly.
can you change the cord to fxo 2 and make calls? I can't make calls with fxo 2.(dont active hunting group)
Hi,
Since I am using one pstn and if switch to fxo2 then also call working.
I am assuming, you want to call using specific ports.
Then you need to create seperate sip trunk in ucm port wise for HT8X1.
Can I make a group call from HT841
Group call means?