Hey Brian I love your vids, I've been doing DJing & Entertainment for 22 years (mobile for the last 17years) & one thing I've realised your always learning lol & your vids I always learn something new or I can relate to a lot of it :-) Keep going & as always I'll look forward to the next vid Massive respect & lots of positivity :-)
Thanks Brian. I have been wondering about the difference in brightness. I have the Inno Pocket Spots, and have always been a bit disappointed in the 12 watt diode.I may have to consider the Pro for that very reason. What a difference in the start-up!!
Technically you can change the gobos in the pocket spot, but I wouldn't really in either as you'd have to replace the entire wheel or risk off balance motoring with attaching an insert. I did replace the fans however with noctua ones that are basically silent and perform incredibly well.
thank you Brian, I see from Denmark in Europe and after your video I have no doubt that it may well pay NOT to choose the cheapest on the market. nice work 🇩🇰👍🙏
Love your videos, Brian! You are a fountain of useful information. I just ordered some pocket pros after seeing them in your videos. Been going through your lighting videos and I've found them to be very helpful! Going to put some of your ideas into effect tomorrow night! I'd love to see more pocket pro videos :)
Hey !!! Love Your videos I wanted to know are you using DMX to create that affects where their cross beams I just got a pair of the pocket pros and I do not use the dMX let me know thanks
Pretty funny seeing the difference in startup calibration. Both of them turn the axis until they hit the limit and set that as a home position. The pocket pro knows it has hit the limit of travel when it hits a limit switch and stops. The Inno knows it hit the limit of travel because... Well, it doesn't.
Great video Brian 👍! ? What's your opinion on all these new inexpensive knock off lights by u kings & so on....tons have been sold on eBay...price are super cheap ..but quality & long haul is the big ? Thanks love your videos 😁!
Hi, A few are asking about the front facing modes are they the same as the pocket spots ? 3 and 4 front facing 3 being vertical? Also the little remote have you ever tried it? I tried , when i choose the gobo say number 3 then go to change the colour say 6 the gobo changes and vise versa do you know if there is a save step? to save the gobo settings or colour settings and move on to another without it effecting the other??
Thank you for the your amazing videos. Some of these products are discontinued now. I want a couple of spot moving head for home usage only. I realize ADJ Pocket Pro is the closest one to want it need but it's out of my budget. What product do you recommend that does the same thing? Thank you.
Graphic Society the stinger spots are cheaper at my local Dj shop they were at 178 for a while I think regular price is 199 they basically do the same thing just smaller , less brighter and no it remote but for home usage it’s perfect in mobile dj’s they could work for small areas
I'm thinking of buying two ADJ Pocket PRO heads, like a mobile dj but I do not know what to use. is the ADJ UC-IR controller fitting? Thank you for your response..
falcondj181 it could work also the spots come with an ir attachment for your phone so you can use the app , it works okay for mobile djing but ultimately a dmx is best
Less than 25w led isn't a decent light for me.... Pocket is I good range price/quality but I love showtec 60w moving head, so intense light and small size.
Hello Brian what show mode do you have them on at the end of the vid? I mount mine vertically and would like to know what is the best show mode to get front of house hit most of the time. Also when I had my inno pocket spots I had to do pan & tilt invert to get them to look like yours do but now that I have the Pocket Pro I only put one to yes and one to no on the slave unit to get that cross beam affect. Thank you for your vids they help a lot brother. Hopefully see you at NAMM I will be there again with Marathon.
Hey dj ernie, its dj ernie in houston. Do they make your speaker stand lean when you place them on their. I am thinking about getting two pocket pros, it seems they have the same function as the focus spot 2 fixtures.
So I got 2 inno pocket spot 3 years ago because of your videos. Great and ficture but to expensive for what i got. Then i heard they discontinued it and it shows that its really not that great,
@@Lucrativecris The Inno Scans are not new at all. They were most likely discontinued because no one wanted them anymore. The Inno Scan HP is big, bulky, and highly priced for what you get. At the time, the Chauvet Intimidator Scan 305 IRC was a much better option.
I was really stuck on both and now I realize that the Pocket Pro is the way to go!
THANKS MAN!!! That was helpful AF!
Hey Brian
I love your vids, I've been doing DJing & Entertainment for 22 years (mobile for the last 17years) & one thing I've realised your always learning lol & your vids I always learn something new or I can relate to a lot of it :-)
Keep going & as always I'll look forward to the next vid
Massive respect & lots of positivity :-)
Thanks Brian. I have been wondering about the difference in brightness. I have the Inno Pocket Spots, and have always been a bit disappointed in the 12 watt diode.I may have to consider the Pro for that very reason. What a difference in the start-up!!
Technically you can change the gobos in the pocket spot, but I wouldn't really in either as you'd have to replace the entire wheel or risk off balance motoring with attaching an insert. I did replace the fans however with noctua ones that are basically silent and perform incredibly well.
thank you Brian, I see from Denmark in Europe and after your video I have no doubt that it may well pay NOT to choose the cheapest on the market. nice work 🇩🇰👍🙏
I'm sold Brian! These things look great and I'm going to add a pair to my setup!
Love your videos, Brian! You are a fountain of useful information. I just ordered some pocket pros after seeing them in your videos. Been going through your lighting videos and I've found them to be very helpful! Going to put some of your ideas into effect tomorrow night! I'd love to see more pocket pro videos :)
Thanks Brian you just answered a question i had about the noisy shuddering start up on The pocket spots.keep up the good work.Tony
Hey !!! Love Your videos I wanted to know are you using DMX to create that affects where their cross beams I just got a pair of the pocket pros and I do not use the dMX let me know thanks
Pretty funny seeing the difference in startup calibration. Both of them turn the axis until they hit the limit and set that as a home position. The pocket pro knows it has hit the limit of travel when it hits a limit switch and stops. The Inno knows it hit the limit of travel because... Well, it doesn't.
Another great to the point video. Thanks Brian. Will these work with the gobos removed? I mean will it just produce plain round beams ? Thanks.
Hey Brain i just purchase 2 pocket pros and wanted to know if my 2 pocket pros will be enough for a medium size venue with 80-100 people.
Gr8 video mate was just about to get the Inno Pocket Spot unit i seen what the difference is so ADJ Pocket Pro for me thanks, thanks
Thank you Brian for another great vid, now i know which one to purchase.
Great video Brian 👍! ? What's your opinion on all these new inexpensive knock off lights by u kings & so on....tons have been sold on eBay...price are super cheap ..but quality & long haul is the big ? Thanks love your videos 😁!
Hi, A few are asking about the front facing modes are they the same as the pocket spots ? 3 and 4 front facing 3 being vertical? Also the little remote have you ever tried it? I tried , when i choose the gobo say number 3 then go to change the colour say 6 the gobo changes and vise versa do you know if there is a save step? to save the gobo settings or colour settings and move on to another without it effecting the other??
Is there a way to add your own customizable GOBOs in the Pocket Pro?
Thank you for the your amazing videos. Some of these products are discontinued now. I want a couple of spot moving head for home usage only. I realize ADJ Pocket Pro is the closest one to want it need but it's out of my budget. What product do you recommend that does the same thing? Thank you.
Graphic Society the stinger spots are cheaper at my local Dj shop they were at 178 for a while I think regular price is 199 they basically do the same thing just smaller , less brighter and no it remote but for home usage it’s perfect in mobile dj’s they could work for small areas
I'm thinking of buying two ADJ Pocket PRO heads, like a mobile dj but I do not know what to use.
is the ADJ UC-IR controller fitting?
Thank you for your response..
falcondj181 it could work also the spots come with an ir attachment for your phone so you can use the app , it works okay for mobile djing but ultimately a dmx is best
Different animals or different fixtures? What's the difference here?
Less than 25w led isn't a decent light for me.... Pocket is I good range price/quality but I love showtec 60w moving head, so intense light and small size.
How do you program the Pocket Pros to project forward only. I contacted someone at ADJ and they told me you can't. Is this true?
That's a show mode feature. Show Mode 3 will do what you want :)
Hello Brian what show mode do you have them on at the end of the vid? I mount mine vertically and would like to know what is the best show mode to get front of house hit most of the time. Also when I had my inno pocket spots I had to do pan & tilt invert to get them to look like yours do but now that I have the Pocket Pro I only put one to yes and one to no on the slave unit to get that cross beam affect. Thank you for your vids they help a lot brother. Hopefully see you at NAMM I will be there again with Marathon.
Hi Dj Ernie, did you find out how to set these for forward facing mode, I have just bought 2 and need to do this also like Brian has done. Regards M
I just set them on show 4 and do a pan inversion and it seems to work well. By the way I mount them horizantal on individual speaker stands
Hey dj ernie, its dj ernie in houston. Do they make your speaker stand lean
when you place them on their. I am thinking about getting two pocket pros,
it seems they have the same function as the focus spot 2 fixtures.
No they do not lean. They are really weight weight and I use Gator ID Framework speaker stands
I put them on show mode 4. That works best for me
What mount is that on the tripod?
Do any of these two lights do split colors?
Max Wank I have the pocket pro and it has split colors
I guess I’m getting the Pocket Pros 😍😍
Does the Pocket Pro also fit in the F4 Case?
Yeah they do
briansredd THX Friend
So I got 2 inno pocket spot 3 years ago because of your videos. Great and ficture but to expensive for what i got. Then i heard they discontinued it and it shows that its really not that great,
Or maybe they want to stop producing it as it’s quite old now and they still have the pocket pro and stinger spots
I never understand why adk discontinues new products like Adj inno scan led and HP yet they still sell the pocket scans and pocket rolls
@@Lucrativecris The Inno Scans are not new at all. They were most likely discontinued because no one wanted them anymore. The Inno Scan HP is big, bulky, and highly priced for what you get. At the time, the Chauvet Intimidator Scan 305 IRC was a much better option.
Thanks as always
Theres a problem with the smaller one