Devin: Im not looking forward to this, heres why... i dont know what im doing Also Devin: takes apart a whole ass engine and rebuilds it. Built different 💪
The evo x kit puts in on feed line right by the fuel pump but it’ll work on feed or return honestly. Just a matter of when it passes through the sensor for ethanol content. It’ll be slower to change on fuel return after regulator than as close to the pump as possible.
bring back the short funny clips at the end of the videos. I loved seeing the funny shit you would do and put it at the end of the video. Amazing build!
Devin thats a parallel setup. So that means the regulator feeds both rails with equal fuel pressure at the same time. So it doesnt go from one side to the other with this setup. It looks like you got it setup 100% perfect my dude. that vacuum line thats by the fuel feed and return lines is the gas tank vent, id run a vacuum line from that hardline to under the car so that you're not getting fumes in the bay. Cant wait to see this thing rip! Bader is getting into tuning now too, maybe you can hit him up?
I think mounting the IAG AOS 90 degrees left or right so the AOS 4 vent hoses/ports and drain hose/port run parallel to the firewall of the car rather than pointing straight out would make it look much cleaner and tidier. Granted you may have to make up some extra length custom hoses to fit. Looks awesome otherwise good work Devin 👊👍☺️
Just watched 3 months worth of videos in 2 days like it was a netflix series 😂 Left a like on every single one so I know I've watched it and its great content and not suss 😂 Sheeesshhh
I think the correct explanation of the lines for the regulator is actually the feed T-Off to 2 lines into the fuel rails and after each fuel rail back to the regulator so that both rails are connected parallel and have equal pressure. Fuel pressure regulators are placed after the rails to regulate the fuel pressure. Devin must have got a bit confused because this has 2 rails instead of 1.
Love the video and the great content you’ve been putting out recently! Crazy how your partnering up with full send Nelk boys and wizza! Love the content man keep it up!
Hey big fan of your work here! Just to ask why you dont remove this SAP Valve there , you dont need it, just remove the plug on top from it and leave it there.. it will free you up some space 👌
Hey I don't think the flex fuel sensor should be seeing any fuel pressure (from the pump to the regulator can see upwards of 40psi),I believe it should be connected on the return line between the regulator & fuel tank, plus I didn't see any fuel filter in your setup dunno if you running one or not...The car looks beautiful by the way.
Dude I wish you could fix my 08 lancer gts it’s been down since last October now I drive a 2016 F-150 as my daily and I work an hour twenty minutes away 5 days a week and jus gas alone I spend $140!!! 😩 it’s so hard to find a really good mechanic or tech guy dats familiar with Mitsubishi. My friends only good at Hondas and Subarus. I think I jus need a new or second hand motor but even dat I have to order it from da Mainland. Like ur videos ur Evos and how ur videos are educational too. Keep it up Aloha 🤙🏻
Ik Devin is a smart guy and probably didn’t film it but I remember he said in the last video there was no oil in the engine so I reaaaaaaally hope he remembered to fill it up 😂🤦🏽♂️
![[LIVE] : ONE ลุมพินี 88 | คู่เอก "ป้อมเพชร vs อัสลามจอน"](http://i.ytimg.com/vi/1ZqTVVbMgbo/mqdefault.jpg)
I love that you pump out videos and don't drag the build on for months.
For real. I wouldn’t mind watching some day in the life stuff too
Probably cause he really knows what he's doing so he already has the parts
He actually care about his subscribers and teaches us stuff as he learns as well
Exactly!!!
Money is a factor my guy. He has the space to do work and it doesn't seem like he has any other job that what he already does.
Devin: Im not looking forward to this, heres why... i dont know what im doing
Also Devin: takes apart a whole ass engine and rebuilds it.
Built different 💪
forreal tell ppl all the time thats how u learn.
Flex sensor usually goes on the return side after regulator. Love the build!
The evo x kit puts in on feed line right by the fuel pump but it’ll work on feed or return honestly. Just a matter of when it passes through the sensor for ethanol content. It’ll be slower to change on fuel return after regulator than as close to the pump as possible.
Maybe with stock hard lines? We ran into huge flow issues on the feed side but we were also using -8 feed lines.
bring back the short funny clips at the end of the videos. I loved seeing the funny shit you would do and put it at the end of the video. Amazing build!
You get straight to the point in your videos and don’t leave anything out 🔥
Devin thats a parallel setup. So that means the regulator feeds both rails with equal fuel pressure at the same time. So it doesnt go from one side to the other with this setup. It looks like you got it setup 100% perfect my dude. that vacuum line thats by the fuel feed and return lines is the gas tank vent, id run a vacuum line from that hardline to under the car so that you're not getting fumes in the bay.
Cant wait to see this thing rip!
Bader is getting into tuning now too, maybe you can hit him up?
I’d put that flex fuel sensor on the return line instead of the feed. Love the content.
Yep, second that, flex fuel in the return line.
“Don’t know what I’m doing. let me explain” 😂😂
Feeling so happy for the build!
Love from Sri Lanka!🇱🇰
Give you props for finish this car fast and letting it eat ASAP
I'm convinced that when you're explaining where everything goes, you're just thinking out loud lol..
You should get the Cobb fuel pressure sensor. Your tuner will love it and also there’s a fail safe mode.
The sparks flying around and Devin reacting all cool made me laugh. Keep it going men you are a inspiration for all of us.
I see those vasyn slides!! Can’t believe this car was once totaled you have done a great job building it!
I think mounting the IAG AOS 90 degrees left or right so the AOS 4 vent hoses/ports and drain hose/port run parallel to the firewall of the car rather than pointing straight out would make it look much cleaner and tidier. Granted you may have to make up some extra length custom hoses to fit. Looks awesome otherwise good work Devin 👊👍☺️
Devin, the ethanol content sensor should be between the fuel rails and the regulator.
Just watched 3 months worth of videos in 2 days like it was a netflix series 😂
Left a like on every single one so I know I've watched it and its great content and not suss 😂
Sheeesshhh
Haha
Sshhheesshhhh
I think the correct explanation of the lines for the regulator is actually the feed T-Off to 2 lines into the fuel rails and after each fuel rail back to the regulator so that both rails are connected parallel and have equal pressure. Fuel pressure regulators are placed after the rails to regulate the fuel pressure. Devin must have got a bit confused because this has 2 rails instead of 1.
Mental how quick you have done this looks sweet cant wait to see it rip.
Devin almost got electrecuted.
Bobby: you tryna blow up my car?
😂🤣😂🤣😂
That gave me a jumpscare
Never put the ethanol sensor on the feed, always the return. Devin, you should know this.
crazy how much goes into making a sti fast vs a evo so much easier to work on
That car has come such a lonnggg way. Definitely a rags to riches build. Nice work man
Love your work, love your builds with a bit of banter with Bobbi added, you guys make me laugh
👏🏻 from England
It is all most done I can not wait to see it starts up
"anyways, what I was saying before I bent Bobbie's rod.." lmao 18:27
I hope you know those lines are not rated for e85. You need the ptfe lines
Love the video and the great content you’ve been putting out recently! Crazy how your partnering up with full send Nelk boys and wizza! Love the content man keep it up!
Love that M v8 sound❤️ and that is finally more in the road👌 love the builds👏 watching in Slovenia👍 keep up the good work👍
No cap but the beautiful Wallace is looking fine AF, can’t wait for the dyno episode you guys are awesome.
Alright Bobbi that's gonna cost you 10,000 bucka rooos
NELK BOYS BABY! Lets gooooooo! Still don’t know how I found your channel but I’m glad I did lol. About a week ago
@Devin Maybe you should mount your vise to the work table :D
I can’t wait for the first start!! Love you video guys
Congratulations on the progress bro keep it up! 👍🏽
Hey big fan of your work here!
Just to ask why you dont remove this SAP Valve there , you dont need it, just remove the plug on top from it and leave it there.. it will free you up some space 👌
www.iwsti.com/threads/how-to-gr-air-pump-delete-photos.276425/
Check it out
I love this sti built
Devin is my favorite youtuber
Bobbi’s nobody’s fool!! Epic work!
Hell yeah, super cool you got a sponsor on the video bro.
17:50 gave me a heart attack
Watching from New Zealand 🇳🇿
Kia ora Dallas
Just by the first layout and bobbi's hey hunney i know its a banger
Gotta love the socks and sandals look🤣🤣
Loving this build
Hey I don't think the flex fuel sensor should be seeing any fuel pressure (from the pump to the regulator can see upwards of 40psi),I believe it should be connected on the return line between the regulator & fuel tank, plus I didn't see any fuel filter in your setup dunno if you running one or not...The car looks beautiful by the way.
Love your builds there always lit sheeesh
R35 GT-R gotta be the next build!
Y’all need to build a GTi
Its cool to see he knows who nelk is
Dude I wish you could fix my 08 lancer gts it’s been down since last October now I drive a 2016 F-150 as my daily and I work an hour twenty minutes away 5 days a week and jus gas alone I spend $140!!! 😩 it’s so hard to find a really good mechanic or tech guy dats familiar with Mitsubishi. My friends only good at Hondas and Subarus. I think I jus need a new or second hand motor but even dat I have to order it from da Mainland. Like ur videos ur Evos and how ur videos are educational too. Keep it up Aloha 🤙🏻
Shouldn't the flex sensor go in the return... Not the feed?
you should make a Vasyn mechanic shirt with the name tag Ripper
lol, theres that lovely word again.... "situated"
Flex fuel goes on the return never on the feed
17:50 Literally made me jump from my seat. 😂
Hyped to hear this thing rip🙏🏻🔥
Hey Devin, what about using AN 90 degree fittings facing down on the AOS if those hoses are bothering you. Maybe that will clean up the hoses??
My head is hurting trying to make since of the Flex Fuel regulator.
17:50 "OHh, my god" 😂
Bloody work mate
Yo those sparks made me flinch😂
17:51 OMG
Fireworks at 17:51 LUL
You've def shocked shit before in an engine bay Devin 😂 you were way too calm brother, sus 😆
who hasn't lol
In Finland, that Ferrari would be about triple the price probably.
Ik Devin is a smart guy and probably didn’t film it but I remember he said in the last video there was no oil in the engine so I reaaaaaaally hope he remembered to fill it up 😂🤦🏽♂️
What turbo is that?
Stopped watching to go watch whistlin diesels video since I just got a message about how good it is
get it JR tuned
@17:50 🤣🤣🤣
Jack Cecil on TH-cam does remote tuning
Sick guys love it.
Won’t be surprised if you didn’t blow that alternator fuse right there 🤦♂️
Definitely a can of 🪱🪱🪱🪱🪱
Thought it was gonna catch fire or somethin
Very very cool man!!!
"yachts for sale" hahahahahaha
The thing that while your a builting the sti and putting a turbo kit , my father ,the same time buys a big turbo for his sube is funny
I got a 2020 STI, what small upgrades should i get, that doesnt void warranty ? I have only axle-back exhaust
Air oil seperator
Bobbi, fly lives matter.
Bro I’m so sick of paying for TH-cam premium then have to watch in video ads.
Yessss let's go boys!!!
Nice Grimmspeed mods.
Are you running stock pistons and rods?
Now its time for you to build a subie❤👌
Are you not watching the same video we are?
@@Bocaine. i mean like his own subie like his old hawkeye
@@dylanbrooner9836 you're right. This is Bobbie subbie actually
where did the fist bump noise go!!!!!!!!!
Wondering why the guy that tuned the evo can't tune the Subaru?
Is this another remote tuner? :)
Man this car on 30 different channels to be given away lol
she built >> she eats ; two builds and I haven't heard "she built."
Let's go new video
Next up: Built Subaru Running from the cops #2 Bobbi Edition 😂
Nice my king😎👌
Wonder how long it will be until this motor blows?
🔥🔥🔥🔥🔥🔥
👍
I didn't see u put bigger injectors?
I’m pretty sure he did . A few episodes back when he removed the intake
lunch break:)
I feel so bad that he’s doing all this work and there’s a good chance the Stock engine won’t last.