keep the vids coming. they're getting better and better so props to JR. for the editing and anyone else taking part in it. I know I want to see more Tundras so I'll be looking forward to those videos
Wish I would have seen this video 2 days ago. I would like to have seen that trimming, heating and folding of the inner liner more in depth. I have the identical truck only mine is a 15. I had a Rough Country 7.5" lift installed with 35 12.50s on 12 wide wheels and had a lot of rubbing. so much so that the truck was barely driveable so I had a Zone 1.5" body lift installed yesterday. I didn't want to hack up my new truck but had I seen that clean trim job you did on this truck I would have done that instead of the body lift.
I went with the bds 6 inch lift with the fox shocks. The bds you can’t go wrong. However the fox 2.0 are garbage. First set blew the seal in the the shock within the first year approx. 25k on them. Gave them the benefit of the doubt and replaced them and lasted about a month. Not impressed. Switched to blisteen shocks and so far over a year and no issue. Note: when the second set of fox 2.0 went the garage told me they replaced a lot of these and said it was all the same case the difference between the fox and the blisteen is the orientation of the piston and the seal. On the fox the seal and piston is on the bottom. The blisteen its opposite. Like I said above, a year and not an issue. Pissed off that it cost me 2 sets to figure this out but happy now it’s not an issue. I cringe now when I see others with the fox set up. Wish I had this expensive knowledge ahead of time
Check out some more of our videos so you can make sure that doesnt happen again! We have a couple videos pertaining to which shocks to go with for different applications, links to videos are below: th-cam.com/video/BW2yQbRvh0E/w-d-xo.html th-cam.com/video/033zD7Vj2-U/w-d-xo.html
Wow quick reply. When i get out of my lease here and buy a new gmc with the 6.2l, do you recommend regearing? i dont trust shops in northern MN. I plan on making arrangements for the 6 hour drive to come directly to you. hahaha
Would love to see the same build on a 07 to 2013 chevy or Gmc... I'm thinking about coming down from Canada to get mine done just trying to price it out@ the exchange rate sucks right now!
I've been thinking adding the 6" BDS on my 2009 Silverado. Been looking for a desert style mid travel kit to put 35's on my z71. Any other recommended kits other than BDS you think would be worth considering. Mostly road, fun in the desert 2/3 times a year.
how is the ride quality? lifted mine with a 6 in lift and seems a little bumpy at times like around 35 to 40 mph. I know a lift rides a little more rough but maybe a balance issue with my tires?
anything to help ride quality with the rear of the vehicle with those fox shocks? I can feel every bump in my seat. Not crazy.... but slightly aggrevating
Why do you say that will the 22x14's fit on a 5" suspension 2" coil spacer and 3" body that's what my plans are run the 22x14's in the summer and a 16x15.5 MT rim and 38in swamper or something similar to that in winter it's my first lift and I'm just trying to figure out what I can get away with w/o having to pay out the ass for it lemme kno I'd appreciate it a bunch I'm looking for that height and stance
Holy shit speaking of trucks i dont know how i got un stuck from going down a backroad in my truck I was pushing snow with my front end lol guess i need to lift it😐 she was a close one
kalau melihat mobil truk merk GMC saya jadi teringat ayah saya yg pada tahun 1974 menjadi sopir truk .betapa gagah nya ayah saya dengan truk GMC nya .hingga saat ini saya masih sangat suka dengan truk GMC tahun 1970 an. tapi sayang saya punya mimpi untuk memiliki tapi tidak punya uang untuk membeli truk GMC tahun 1970 an ...apakah pihak CLUB GMC amerika bisa membantu mewujutkan mimpi saya dan saya bisa mengenang ayah saya yang pernah bangga bisa menjadi sopir mobil truk merk GMC....
Assuming its a 1500, check out all these lifts for your truck - www.customwheeloffset.com/store/suspension?sort=popular&year=2017&make=GMC&model=1500&drive=2WD&sub=Suspension%20Lifts
Whoever edits these videos needs a raise and a fat bonus because they kill it!
Custom Offsets Mario is a beast! Keep up the great videos guys!
Custom Offsets sweet truck! Is it true if you go for a 6 inch lift and 35s you have to get new gears so your tranny won't mess up?
I really feel this is the perfect set up for the new GM's.
The quality of thesse videos are just incredible guys. Keep up the amazing work!! If i lived close to y'all, id sure as hell take my truck here!
Great truck! The editing was pretty lit too
I have the same lift and shocks on my 2011 Silverado...it smooth on the road, and a beast in the mud
Finally a truck that's not an Auto Zone special!!
Awesome truck!! If I ever win the lottery I'm spending a chunk of it with you guys.
doing that same set up to a 2018 sierra its been in the shop since friday and get to pick it up tommorrow, cant wait
Make sure you get it added to our gallery once you get everything installed!
customoffsets.com/add
keep the vids coming. they're getting better and better so props to JR. for the editing and anyone else taking part in it. I know I want to see more Tundras so I'll be looking forward to those videos
That's my gmc. w/o lift on it. best truck I've had.. I will be doing a 6 inch lift with 33s asap
GREAT video dudes! the editing was amazing and we all know the content is stellar as usual. keep up the great work guys
That’s some great professional editing! Great introduction video of the truck
Thank you! 🤘
great video, editing has been getting better and better. keep it up
Gorgeous truck it really gave me some ideas how I want my truck to be. Great video and amazing edit skills !!
Hey CO! Your videos are legit and are getting better with each video you make. Keep up the great work!
But it's no longer a Z71, it's the Customs Offset LE
You should make a badge to replace the Z71 badge
We make LE badges for certain builds!
"and we are gonna fix that" yes sir!!
The edit is insane
would this set up need a regear? and would this make the truck sluggish
This truck still had stock gears. Most people don't consider regearing until you get above 37's
great job on the editing&video quality
gotta be a good company to do dealer lifts good job fellas
Thanks for the video this helped alot. You guys have a good day.
Wish I would have seen this video 2 days ago. I would like to have seen that trimming, heating and folding of the inner liner more in depth. I have the identical truck only mine is a 15. I had a Rough Country 7.5" lift installed with 35 12.50s on 12 wide wheels and had a lot of rubbing. so much so that the truck was barely driveable so I had a Zone 1.5" body lift installed yesterday. I didn't want to hack up my new truck but had I seen that clean trim job you did on this truck I would have done that instead of the body lift.
maxum3300 how do you like the 7.5" Rcx? Mine rides like a dump truck and I'm wondering if it's the installer
Gm Trucks mine doesn't. mine rides great.
Ready for the mall.
I went with the bds 6 inch lift with the fox shocks. The bds you can’t go wrong. However the fox 2.0 are garbage. First set blew the seal in the the shock within the first year approx. 25k on them. Gave them the benefit of the doubt and replaced them and lasted about a month. Not impressed. Switched to blisteen shocks and so far over a year and no issue. Note: when the second set of fox 2.0 went the garage told me they replaced a lot of these and said it was all the same case the difference between the fox and the blisteen is the orientation of the piston and the seal. On the fox the seal and piston is on the bottom. The blisteen its opposite. Like I said above, a year and not an issue. Pissed off that it cost me 2 sets to figure this out but happy now it’s not an issue. I cringe now when I see others with the fox set up. Wish I had this expensive knowledge ahead of time
Check out some more of our videos so you can make sure that doesnt happen again! We have a couple videos pertaining to which shocks to go with for different applications, links to videos are below:
th-cam.com/video/BW2yQbRvh0E/w-d-xo.html
th-cam.com/video/033zD7Vj2-U/w-d-xo.html
Perfect for my LTZ suburban.
New to this, was thinking 12 wide rims and 33s lol no...I like exactly this.
35x12.5s on 10 wides correct?
Nice truck. Did you install spacers on the rear wheels? If not how much of a stance difference front to back?
how much would it cost to get the same setup installed on my sierra (same year)
That Ford F-250 behind this GMC looks sweet! What size lift kit and wheels are on that rig?
AWESOME Truck. . Can you Guys Do video on How you Do the trimming and bending on the newer Silverados ?
Nice! What size rear block did you use? BDS specs say 5" taper block. Is that true? Or was it a 6" block? Thanks
love the production
Might as well start saving up now. Roughly, how much was this in price out the door after install and all that good stuff?
Wow quick reply. When i get out of my lease here and buy a new gmc with the 6.2l, do you recommend regearing? i dont trust shops in northern MN. I plan on making arrangements for the 6 hour drive to come directly to you. hahaha
what camera and steady attatchment are yall using?! this is fantastic quality, and even better editing!
fantastic thank you!
Could you do a 20x10 -24 with a 305/55 and avoid trimming the back of the wheel well? I wanna avoid trimming metal if I can. Currently have RCX 5" kit
Take a look in our gallery and see what others were able to make fit on theirs!
Customoffsets.com/gallery
When are ya"ll gonna get the Hostile Alpha in 22x14??
How much is it for the Lift/wheels and tires package installed by you guys?
Please email us at info@offsetsgarage.com 🤘
Would love to see the same build on a 07 to 2013 chevy or Gmc... I'm thinking about coming down from Canada to get mine done just trying to price it out@ the exchange rate sucks right now!
Custom Offsets I wish is was mine if the price was right!
Custom Offsets I wish it was mine if the price was right with the exchange rate...
I want a vehicle spotlight on that powerstroke stat! (If there isn't one
how far out did the wheels stick out and did it require a spacer in the rear to make the wheels flush?
Do y'all sell the custom offsets badge?
Nice truck! like the lift and wheels, Looked clean before they fucked with it though.
That's a sexy truck.. love the editing.
What would be a good size lift for a 2011 silverado 1500 to run 20x12 -44 w/ 33x12.50??
Thanks, and keep the amazing videos and builds coming.
Gm Trucks I've seen the 2011 silverado with 20x12 -44 33x12.50 with only a 6" lift.. yes they did a Nor-Cal mode but it worked.
Gm Trucks I'm just gonna do a 6" for now and might add a 2" or 3" body lift.
Thanks.
Custom Offsets yes I know. I've been though it but there is just so many.
Thanks. love this video by the way.
I've been thinking adding the 6" BDS on my 2009 Silverado. Been looking for a desert style mid travel kit to put 35's on my z71. Any other recommended kits other than BDS you think would be worth considering. Mostly road, fun in the desert 2/3 times a year.
I just bought a 2018 GMC Denali 4x4, Do you have any videos on leveled or lifted Denali's?
Yukon Denali or 1500/2500 Denali?
2018 GMC Denali 1500 4x4
what are your thoughts on offset rims vs wheel spacers? just looking for something temporary before I drop the money in the rims
what programer do you use for the best results? bang for the buck
Get a custom tune!!
Not the intro song the song used for the GMC rolling and the edit. What song was used???
Never mind I found it.
Rehmdy OG what is the name of the song?
Rear wheel spacers on this one?
Great vid and editing. subbed
dope ass video, but what I'd really like to c is a 2nd gen ram 1500 with 5" lift kit and 2" coil spacers @ 22x14
do you reprogram the speedo when you change tire size?
How much would this run me in price? I've been trying to save up for my ol' Dodge but I don't know whether or not I want to just level it or lift it.
Any good recommendations for a truck shop in San Antonio?
I was just telling my brother today about how I want this year model of truck for my next one, saving this for uh... research purposes
You probably
Mentioned this in the video and I missed it. But what size rear block did you guys do for this truck to have it perfectly levelled?
dope truck
What are the cons of lifting it to that extent?
Nothing we can think of 🤷♂️
Sooo, yeaa, this is hand down the best style GM Truck year. They killed it in 2014. Now they look weird , with so much crown around the headlights
how is the ride quality? lifted mine with a 6 in lift and seems a little bumpy at times like around 35 to 40 mph. I know a lift rides a little more rough but maybe a balance issue with my tires?
anything to help ride quality with the rear of the vehicle with those fox shocks? I can feel every bump in my seat. Not crazy.... but slightly aggrevating
This is irrelevant but, can I fit 2 40" behind the grille led light bars that yall sell on a LML or will it not fit
Why do you say that will the 22x14's fit on a 5" suspension 2" coil spacer and 3" body that's what my plans are run the 22x14's in the summer and a 16x15.5 MT rim and 38in swamper or something similar to that in winter it's my first lift and I'm just trying to figure out what I can get away with w/o having to pay out the ass for it lemme kno I'd appreciate it a bunch I'm looking for that height and stance
How much for my truck to get done ???
Click the links in description for pricing Justin!
Do a Colorado
Great video !
I would like to put a 6 inch lift on a 2011 GMC Sierra 1500
Right on Dale🤙 Check out our 6" kits for your 2011 Sierra 1500 here!
bit.ly/2GTyLUg
super nice
How much would a 4 inch lift cost to install on my 2014 Sierra 4x4 ? (Estimate)
Install prices will vary shop to shop with labor rates, best bet is to ask a shop local to you!
@@CustomOffsetsTV sounds good , on average how much would you guys charge ?
thanks
What song was used to edit Mario?
Can u showcase a 2016 f150
Whats a good lift level for my 2014 sierra v6 double cab? thanks
Regear it and put some fender flares on it and then I might be interested
with a 3" body lift
Holy shit speaking of trucks i dont know how i got un stuck from going down a backroad in my truck I was pushing snow with my front end lol guess i need to lift it😐 she was a close one
Wiggled my wheels and went back and forth about 30 times lol woops
Song name?
He said this kit is $1000? Give me 2
kalau melihat mobil truk merk GMC saya jadi teringat ayah saya yg pada tahun 1974 menjadi sopir truk .betapa gagah nya ayah saya dengan truk GMC nya .hingga saat ini saya masih sangat suka dengan truk GMC tahun 1970 an. tapi sayang saya punya mimpi untuk memiliki tapi tidak punya uang untuk membeli truk GMC tahun 1970 an ...apakah pihak CLUB GMC amerika bisa membantu mewujutkan mimpi saya dan saya bisa mengenang ayah saya yang pernah bangga bisa menjadi sopir mobil truk merk GMC....
this is what i was lookin for. can you fit 37x12.5 r 20x9 on a 6in bds?
Danil Shimanskiy fuck no
I want to see tundras!!!!!!!!!
That is a sexy a$$ truck.
Does the bds push out the front track with like rough counry?
Not nearly as bad Esteban!
@@CustomOffsetsTV will the 1.75 spacer leave back end wider than front end?
Does BDS make 6” lift kits for a 2WD 2017 GMC Sierra crew cab?
Assuming its a 1500, check out all these lifts for your truck - www.customwheeloffset.com/store/suspension?sort=popular&year=2017&make=GMC&model=1500&drive=2WD&sub=Suspension%20Lifts