I think after the putty you need a primer then sanding, prime again then wet sand that way the surface is much better prepared for paint. That is why your first paint job failed as well it wasn't ready for paint yet. Regardless your 3D and manufacturing process is on point..... simply amazing.
제가 지금 어떤 경찰 기동 장갑차를 만들려고 하냐 하면은요!. 만화 중에 헬로카봇 에서 경찰 카봇 인 k캅스 에서 우측팔을 담당하고. '돌격을 외치는 저돌적인 성격의 장갑차가' 있는데 걔 이름이 터보에요 근데 그 장갑차 모습을 봤는데 너무 멋있어서 꼭 한번 3D펜을 사면 만들어 보고 싶어지더라구요!
Nice design bro, next time don't make the front bumper flat and in the same level as the wheel arches. A light curve protruding a bit further will make the front end look even better.
Thabks for this tutorial i ised a 1/24 scale model car body and just use that as a form basically to draw with the 3d pen over to make my first 3d pen car and after hours and hours of smoothing with a dremel butane soldering iron that has different attachments that are great for smoothing 3d pen models and builds and hours of sanding and body filler andnprimer i finally gotnit in oaint and its flawless and looks jist as good as the model car kits body except its in full paint. Im working on the chassis framr and interior floor pans and stuff now to make a full car from 3d pen
my friend, u could be makin and selling these online.... i sure will love to buy one of these... and if there will be various colors, sure more than one. your skills, both as designer and creator, are god like.
I think after the putty you need a primer then sanding, prime again then wet sand that way the surface is much better prepared for paint. That is why your first paint job failed as well it wasn't ready for paint yet. Regardless your 3D and manufacturing process is on point..... simply amazing.
Thank you broo, it's my first painting, so I'm not very good at it. I will learn a lot in the future. ; )
@@NEWCAR_official You sure will, pracrice makes perfect. Like I said you are very skilled and talented person...
@@NEWCAR_official What did you manage to call your new concept car bro ???
it looks like a konnisegg jesko, the headlight and rear lights is familiar like a jesko, you did it more chubbier only. but good effort bro.
페라리에 멕라렌 섞은느낌쓰 예쁘네요 잘보고가요
미쳤ㄷ다~~~~ 대단합니다
Really good effort it’s certainly your own design, well done.
😂😂🤮🤮🤮
😊👍
이런영상 떠야돼는데...쇼츠에 한번 올려보세요..!!! 정말 퀄리티도 좋고 잘하시네요!
Seems like combination of Lamborghini aventador,corvette stingray c8,and porsche 918 ???
와우 엄청나네요 숨은 고수가 여기있었네요
와... 이건 진짜야 퀄ㄹㅇ
어...뭐지? 이런 핵초고수는 처음 보는데...
next level creativity JST WOW thats alot of hard work great keep rocking dude
이렇게 실력이 좋으신데 얼른 떡상 하셨으면 좋겠네요!
보고 구독했습니다 진짜 금손이시네요
다음영상 F21 보라메 가능하신지요?
와 금속바디 컬러..... 많은 3d펜 제작자들이 자동차를 만들지만 저걸 못해내더라구요... 제가 본 유튜버중 가장 잘만든것 같습니다 ㅇㅅㅇb
못해내는게 아니라 안하는거죠 ㅋㅋ
So you haven't seen Sanago's work.
@@_MadFox Cars made by Sanago are not good.
@@ALProAce Come on. His Porsche looks very neat and harmonious. And this hypercar model, to be honest, is very disproportionate.
와우 당신은 천재 입니까!!
Never
약간 잔잔하고 어두운 분위기였으면 좋겠음 마음이 평온해지는 그런 분위기? 그리고 타이타닉 만들어 주세요.
03:51 Look like Maggie 😂
Мало просмотров! Где вы, алгоритмы ютуба?
오ㅏ..ㅋㅋㅋ 3D펜으로 이정도 퀄리티가 가능하네요ㅋㅋㅋㅋ
Got recommended today ! This is gonna be a huge channel one day !
Keep it up
프라모델킷을 직접만드시는거네요 ㅋㅋㅋㅋ대단하십니다!!!
코닉세그 레제라와 부가티 디보를 합친듯한..
뒤는 맥 570s와 918스파이더를 바른듯한....
아는척 ㄴㄴ염
@@임라온-g7h ?
@@임라온-g7h 저 두차 디자인 비슷하다 한건데 뭐가 꼬우신지?
@@lowline5862 니차뭔데?
와 구독해야지
3D펜이 제게 있다면. 저 스케일로 경찰 기동 장갑차를 한번 제작할 생각도 하고 있어요!
제가 지금 어떤 경찰 기동 장갑차를 만들려고 하냐 하면은요!. 만화 중에 헬로카봇 에서 경찰 카봇 인 k캅스 에서 우측팔을 담당하고. '돌격을 외치는 저돌적인 성격의 장갑차가' 있는데 걔 이름이 터보에요 근데 그 장갑차 모습을 봤는데 너무 멋있어서 꼭 한번 3D펜을 사면 만들어 보고 싶어지더라구요!
꼭 저 영상 의 스케일 아니더라도 1/35 스케일로도 한번 만들어보고 싶은 마음이 생겨요!
3D펜 유튜버들이 많이 있지만 제작하는 방식들이 다 다르네요 진짜 멋집니다~
와 퀄리티 너무좋네요
와 고양이보다 잘하는사람은 첨보네요
At 5:00 it looks like it’s made out of human skin
저도 3d펜을 다루고 있지만 진심으로 제가 지금까지 본 작품중 단연 최고입니다 이 작품을 평하기엔 제가 아직 모자라기에 조용히 구독 박겠습니다
good creation! I wanna make this for my pixel art
Wow that was so great
구독박고갑니다
대단하십니다! 저도 따라해보고 싶어지네요.
Lamborghini + Ferrari + Porsche + Bugatti =:
how do you find these plastics for widescreen and headlights, tail lights. please let me know. Thanks. Good work
나 순간 '사나고'인줄
뒷쪽 느낌은 부가티 시론과 비슷하네요.
부가티,멕라렌 합친느낌.
시론 보단 디보가 더 비슷하네요
wow . superb
Не важно на что похожа модель, сложный кузов, кропотливая работа, весьма хороший результат. Молодец!
우와!🙊
broo please make ducati pangale please please
Nice design bro, next time don't make the front bumper flat and in the same level as the wheel arches. A light curve protruding a bit further will make the front end look even better.
영어자막에 sending이 아니고 sanding으로 바꿔야할거같아요. 작품은.. 대단하네요 !!
It looks amazing, you should send this project to maclaren or pagani, you have really big talent
I think Ferrari it looks more like Ferrari and Mercedes
Really cool
와 지금에야 이런 채널을 알게 되다니...여유되시면 8륜 스포츠카도 만들어주십쇼.
채널 떡상 홧팅
Cool. Just cool
Чел, подай свой концепт в какую нибудь крупную компанию по производству машин, я думаю там должны одобрить такой концепт, выглядит просто супер!
Сбоку как будто сплюснутый, как детская машинка, если вытянуть и подкоректировать то получше будет, но не возьмут, слишком уж она похожа на остальных
@@legendary1627 согласен, но все же прикольно, меня хватило только на экосайдер
реально
Никто его не будет слушать. Я бы конечно так уже делал
Он зад скопировал с Макларена , а перед сделал не красивым , надо более вытянутым его сделать
무친 실력 😳 금손이시네 ㅎㄷㄷ
Автор спасибо вам за ваш труд и талант от бога вы создаёте красоту!Огромный лайк вам за ваш труд!
Wow, that's a really cool video.
와........
Looks like a Mclaren, nice work!
Can u please came more videos. There so good. And I like to follow along with my pen.
thanks bro. maybe. a month later
Headligts looking similar on ferrari one
Very impressive! Real creativity is about getting the best out of the tools you own.
Its like a combination of Ferrari and Aston martin
사나고 빰치는 3D펜 실력....믓지다
3d팬 제작자중 원탑이네..
와 퀄리티 미쳤..♥
You deserve more subs for this cause it looks awsome
i cant believe it but its true😳😱
Fun fact:This is how they make 1:1 scaled of concept cars in real life but they use 3d printing and the material of it is mud
Most of them are sculpted with tools out of clay, not 3d printed
I want you to try to create wilier gtr team 2016
I'm pretty sure one day your car design will be seen running on road
That kinda looks like a McLaren Meliora/IED Syrma hybrid. Great work though! 👍
15:39 gives NAVY vibes
이것은 멋진 것 같습니다!
is this design based on mclaren?
👍👍👍good work(Belgium)
This is fascinating...I am looking at this clip like I am under hypnotize:))))
Can you make it into a rc car?
although sketchy process ..🔥craftmanship
Sangat imajinatif dan jenius
One llike for your creativity 👍👍👍👍👍
At some point the structure looked like YumYum
국산차도 가능한가요?
Approximate how much cost to make it?
It loos like a mix between, Aston Martin, McLaren, and Buggati
Very nice
이야 저정도 금손이면 뭐든 될텐데
🤷🏻♀️아니 이런 실력인 분이랑 제가 친구 먹어도 됩니까?
Awesome work. Question. Where do you find the car out lines? Thanks.
Your imagination
사나고님이 등장해야되겠는걸..?
The back looks like a McLaren P1 bassicly, but its good looking. Just need to approve the front. And the size.
3d pen was amazing before I finally found 3d print 😂
with 1 click all to the magic appear before the eyes
Will the model be called Vendetta r-gt in the franchise it uses an engine with 8 cylinders without turbos and superchargers
금방 1만구독자 가시겠는뎅....ㄷㄷ
Сзади вообще похоже на Mclaren
3D펜 만지는 솜씨도 솜씨지만 차량 디자인이 아주 그냥 죽여주네요. 정말 이상적인 하이퍼카의 디자인인것 같습니다.
Thabks for this tutorial i ised a 1/24 scale model car body and just use that as a form basically to draw with the 3d pen over to make my first 3d pen car and after hours and hours of smoothing with a dremel butane soldering iron that has different attachments that are great for smoothing 3d pen models and builds and hours of sanding and body filler andnprimer i finally gotnit in oaint and its flawless and looks jist as good as the model car kits body except its in full paint. Im working on the chassis framr and interior floor pans and stuff now to make a full car from 3d pen
제가 장담하는데 곧 있으면 구독자 1000명은 거뜬히 뛰어넘을 수 있습니다
Amazing job! You're an artist!
Damn this is so good.. keep on sharing mate
cool car！！
Thật sự đẹp đó.rất chi tiết
my friend, u could be makin and selling these online.... i sure will love to buy one of these... and if there will be various colors, sure more than one.
your skills, both as designer and creator, are god like.
🔥❤👏خیلی جذاب بود
Karya luar biasa dari sebuah pena 3D. Mungkin aku harus belajar lebih banyak.
ㄷㄷ....... 3d모델사업 해도 괜찮을퀄리티인데요???
What is the name of that floating thing plsss tell me😢😢😢😢❤❤