Installation of Universal 13 inch RykerMod Steering Stabilizer / Damper bracket kit Ryker 600 900
ฝัง
- เผยแพร่เมื่อ 5 ส.ค. 2024
- This video is an installation aid only. The printed instructions must be read completely and present during the installation of the stabilizer / damper kit. RykerMod.com Steering Stabilizer Backet (patent pending) Can Am Ryker 600 and 900
Hey Jeff, the instruction give an upper limit of 10. However, we suggest setting your stabilizer to 4-6. Most of our bikes that we have and install. We set to 4. We do have some heavier men that prefer higher settings.
However, let’s understand the assembly. The stabilizer is installed as a shock arrester. The lower the setting, the better for the rider. The higher, the setting, the more restriction. For bigger, stronger people this may not be an issue. But for most riders we find 4-6 being the sweet spot.
I really like this product, it definitely makes for a more controlled ride.
Fantastic level of detail on these install instructions. Thank you much!
Thank You
Got mine today. New 2022 owner here and thanks for selling me a piece of junk! Kidding, totally kidding. Great quality, great video and it rides AMAZING. Took me an hour and 1/2. I am not very mechanically inclined but it turned out exactly in perfect position. Would have been done a lot sooner if I wouldn't have messed up 1 of the measurements. Far as I'm concerned this is a must have if your riding on roads like me (Indiana) Thank you, great experience all the way around
Got mine today and installed. Very nice kit. The parts are top notch and the instructions are above and beyond. Significant difference in handling and stability. Nice job.
Thank You
Nice Video! Great Product! I'll try and get one to review on my channel soon!
Seems a litle too expensive. I forgot to say that your install video was easy to understand and follow. Thanks.
Worth every penny:)
Nice video
I wish i could afford this but my wife told me i was done buying parts for my ryker this year .
Read all the reviews and decided to purchase one. Man they were not lying no kidding this is a GAME CHANGER..... It really feels MUCH MORE STABLE AND LESS VIBRATION THRU THE WHEEL DEPENDING ON THE ROAD. The videos were spot on and it took about and hour or so. I will say though that I need some slight adjustment of a 1/8 or 1/16 hereor there to make it so it did not jam or bottom out the cylinder. on full turn to one side. I do feel this is my sport model and not the kits fault. If you need to adjust just do a little at a time and you will be fine. Drove 100 miles today at the 5 setting and seems to be perfect. I was unable to find a video describing why to set it at only 6 at the highest but with so many people saying either 4 but no higher than 6 I don't think I want to test it out lol. Over all THIS IS A MUST HAVE FOR A RYKER.
It works just great 😁
Thank You:)
I understand that your focus is on the Ryker; however, since you also engineer & fabricate, I was hoping for input (on a ‘relative’ application).
For Dual-Sport / Enduro motorcycles, the go-to seems to be the ‘pod’ style damper (e.g. Scotts). I have had many street/sport bikes, but not dirt bikes.
Do you think that a linear damper would/could work on a dirt bike ? Or, can you think of a compelling reason why they don’t seem to be used other than folks’ need to buy expensive bling ?
I appreciate you. Sharp parts design & production. Excellent explanations.
You mentioned adjusting the wheel, but what number are you setting it to (does setting it to a higher number make it harder to steer) ?
Adjustment instructions are covered in the installation manual.
To answer your question stabilizers are not installed for restriction but for shock arrest. It is a best practice to set your stabilizer to its minimal affective setting.
Hello, where did you get the other steering clamp since I have seen that they only sell them with one, thanks from Mexico
The clamps ares manufacture by RykerMod and sold as a kit www.rykermod.com we have 3 kits to choose from.
Hi for anyone that has this installed I have a question. It appears that the assembly covers the oil filter cap. Do you need to remove the whole assembly when doing an oil change?
You do not, however we sometime remove the damper rod from the front bracket for bigger hands:)
Ok I have a question and no matter were I search cant get the answer... The instructions and such are great but it says in multiple places do not go over setting 6. on mine it does run awesome at five or six. However I wonder if 7 or 8 might even be better. But for the life of me I cant find any information. In one video someone ran it at 8 but he had very little information. Any chance someone can help? I don't want to mess it up by going higher. I tried the web site but cant find a phone number for the company...
is this meant to be an alternative to replacing the sway bar?
This system eliminates handle bar shake or pull away while riding on rough roads or riding over large bumps. Improves handling in turns and gets rid of the drifty feeling in the straights.
We've used them forever on road bikes for the same reason, (Common term Tank Slapper) we just developed a way to apply the technology to the Ryker.
Sway bars and end links really do not do the same thing. Please read more on www.RykerMod.com Video coming soon.
Why for only non turbo bikes?
Hi what is it size of braket ?
What are the dimensions of the spacers please ..I need to make a couple as mine are missing .
Get in touch with us and we can send replacements.
Info@rykermod.com
Why didn't you just use a shorter bolt in the rear mount instead of the spacer for the stabilizer ?
This allows one to upgrade to an Ohlins damper later without needing a new hardware kit.
Just installed kit as per instruction and video. End of damper hits plastic. Help
Allen send pictures to us, We can help... info@rykermod.com
you can also watch this video.
th-cam.com/video/8h5tgNgdzJc/w-d-xo.html
I added one last summer and after only 4500 miles it started leaking oil.
Can the oil filter be changed with the damper installed?
Great question, I would like to know that as well
It can, Reposition the crossbar bracket so the oil canister fasteners are still accessible.
@@rykermod3521 Do you have a measurement for the move or just wing it?
@@ShaughnGray we provide written instruction and pictures with the kit. The video also gives the required dimensions.
@@rykermod3521 I installed it by instructions. You said move it to clear the oil canister. How many inches do I add to the original instructions?
Is there a different on the road 🤔
Please read the comments below. It eliminates handlebar shake and the unsettling shifty and drifting feeling when riding on rough roads.
How about the adjustment on the dial
We have our set on 4-5
Need the link to purchase.
www.RykerMod.com
your esperience whit this device????
A steering stabilizer for the Can-Am Ryker style of bikes.
What are the torque specs. Lol.
They are supplied in the printed instructions, delivered with the kit.
@rykermod3521 can't you just tell what they are?