The sign is a subtle joke. The shop is called "Sneed's Feed & Seed", where feed and seed both end in the sound "-eed", thus rhyming with the name of the owner, Sneed. The sign says that the shop was "Formerly Chuck's", implying that the two words beginning with "F" and "S" would have ended with "-uck", rhyming with "Chuck". So, when Chuck owned the shop, it would have been called "Chuck's Fuck and Suck".
I think it’s biggest issue is the space between the lens protector and the glass - inside those three holes. Once the glass emitter lens gets dirty, ugh good luck cleaning it.
Bro, any chance of doing a video on your finished KS-23? Garand Thumb's video focused too much on the kaboom and too little on the actual meat and potatoes.
That helmet setup is my ideal vison. Whats the thermal? I'd go for a 640 that detaches to the rifle. Sweet diffuser setup. My M6TR is sitting in my mailbox atm lol while Im away. Gonna experiment with milk-jug bits when I get my hands on it.
It's a pfalcon, the canuck version of the RH25 but I'm a sucker for black and the RH25 only comes in FDE. Full disclosure it's a bit heavy for helmet mounting but the versatility of clip on is nice.
Glad to see you still around! I commented this a while back on your Street Sweeper video, but is there any way I can get my hands on the file you sent to 3DHubs for the front receiver bit? My kit is missing that too. Also any info on what metal you went with would be welcome!
Sorry I missed your comments til now, just uploaded it here: www.thingiverse.com/thing:6836098 Far as I remember I went with some random flavor of mild steel because I'm poor, I believe the original receivers were as well but I'm just guessing based on hardness.
@Kjaskaar I had a question for you I'm looking at buying one of these as my first ir laser but I'm not sure which one to get they make 3 different ones all the same on the outside but they make one that is a low power only class 1 laser which I know I'm not interested in from my research but the other two I'm torn between. They make the regular low/high power one that has a laser power of 2MW on low and 30MW on high but cold harbor has an "eye safe" model where all the specs are the same they just lowered the power of the laser to 0.7MW on low power and 5MW on high power. The reason they say is to prevent bloom under NOD's the only other spec that was different on the "eye safe" one was the illuminater on low power was stronger then the full power one the "eye safe" ones illuminator on low was 5MW compared to 2MW on the full power one other then that they are the same. So my question is does it matter? I really wanted to get a full power laser for my setup but I keep getting conflicted arguments some people say that these FP units are way to bright and bloom so bad they aren't usable so get the lowered laser power version. But on the other hand people say you absolutely want the FP laser for pushing through light sorces ant that the laser on there unit on low power is just fine and there is no need to get that "eye safe" version. What do you think and what is your m6tr's power rating in this video? Sorry for the long comment but I really don't know which one to get.
@@TacticalJay. Got one put together, took a minute due to printer shenanigans whoopsie. Toss me some contact info if you still want it and I'll get it out to ya.
/sigh. Now im gonna HAVE to setup my 3d printer again. Why can’t someone just make a diffuser 🤦🏻♂️ might as well print up my WML ND caps while I’m at it.
The sign is a subtle joke. The shop is called "Sneed's Feed & Seed", where feed and seed both end in the sound "-eed", thus rhyming with the name of the owner, Sneed. The sign says that the shop was "Formerly Chuck's", implying that the two words beginning with "F" and "S" would have ended with "-uck", rhyming with "Chuck". So, when Chuck owned the shop, it would have been called "Chuck's Fuck and Suck".
I thought the ATF got you man.
Pepperidge Farms remembers this channel Great to see you back!
He returns to us now at the turn of the tide
He's alive...
I think it’s biggest issue is the space between the lens protector and the glass - inside those three holes. Once the glass emitter lens gets dirty, ugh good luck cleaning it.
Dudddeee! I've been searching for something like this for weeks. Thank you!
Glad to see you back, I knew you were alive after seeing your shotgun in that garand thumb vid, was hoping you'd return!
When the world needed him he returned
I was starting to worry you forgot about us. Glad to see you back
Glad to see your still alive!
Welcome back. We missed you
Bro, any chance of doing a video on your finished KS-23? Garand Thumb's video focused too much on the kaboom and too little on the actual meat and potatoes.
I'd considered it but it'd just be all the same info that was in the making vids. I just uhhh made them too damn long in retrospect.
He's back!
Back from the dead!
good to see you!
Kjaskaar never dies…
That helmet setup is my ideal vison. Whats the thermal? I'd go for a 640 that detaches to the rifle. Sweet diffuser setup. My M6TR is sitting in my mailbox atm lol while Im away. Gonna experiment with milk-jug bits when I get my hands on it.
It's a pfalcon, the canuck version of the RH25 but I'm a sucker for black and the RH25 only comes in FDE. Full disclosure it's a bit heavy for helmet mounting but the versatility of clip on is nice.
@@Kjaskaar Wow its like, identical to the RH25, same weight too. Goo to know about it, thanks. Dont understand Infiray doing FDE only
Holy shit he's alive
Thank you 🙏
I did this but I stuck a diffuser in the existing rubber cover and it works great!
excellent job sir ! thx for it
And so it really was.
(:
Subscribed and liked, good stuff
he back
Glad to see you still around! I commented this a while back on your Street Sweeper video, but is there any way I can get my hands on the file you sent to 3DHubs for the front receiver bit? My kit is missing that too. Also any info on what metal you went with would be welcome!
Sorry I missed your comments til now, just uploaded it here: www.thingiverse.com/thing:6836098
Far as I remember I went with some random flavor of mild steel because I'm poor, I believe the original receivers were as well but I'm just guessing based on hardness.
@Kjaskaar I had a question for you I'm looking at buying one of these as my first ir laser but I'm not sure which one to get they make 3 different ones all the same on the outside but they make one that is a low power only class 1 laser which I know I'm not interested in from my research but the other two I'm torn between. They make the regular low/high power one that has a laser power of 2MW on low and 30MW on high but cold harbor has an "eye safe" model where all the specs are the same they just lowered the power of the laser to 0.7MW on low power and 5MW on high power. The reason they say is to prevent bloom under NOD's the only other spec that was different on the "eye safe" one was the illuminater on low power was stronger then the full power one the "eye safe" ones illuminator on low was 5MW compared to 2MW on the full power one other then that they are the same. So my question is does it matter? I really wanted to get a full power laser for my setup but I keep getting conflicted arguments some people say that these FP units are way to bright and bloom so bad they aren't usable so get the lowered laser power version. But on the other hand people say you absolutely want the FP laser for pushing through light sorces ant that the laser on there unit on low power is just fine and there is no need to get that "eye safe" version. What do you think and what is your m6tr's power rating in this video? Sorry for the long comment but I really don't know which one to get.
Holy dog nuts, you're still alive?!
Is there a difference with the Diffusor and the ND filters? eBay seems to have the ND’s for cheap but they want $30 for 1 Diffuser.
You live!
Genius !! Can I buy a completed diffuser from you for the m6-tr ?
I'm fresh out of the surplus caps, soon as I get some in I can send one out to you.
@@Kjaskaar thanks dude just let me know 🙏🏽
@@TacticalJay. Got one put together, took a minute due to printer shenanigans whoopsie. Toss me some contact info if you still want it and I'll get it out to ya.
@@Kjaskaarit won’t let me give my contact my comment keeps getting deleted
Would you add your @ in the description so I can send you a message brother
hello fel, are you doing ok?
Back from the grave
🐐’d
WE ARE SO BACK
Were you that anon that printed this in TPU at first? Couldn't this be done by modding the existing rubber with the diffuser instead?
Original is way too thin to mount something on to, unless you wanted to superglue in just the diffuser material itself. I guess you could do that.
/sigh. Now im gonna HAVE to setup my 3d printer again. Why can’t someone just make a diffuser 🤦🏻♂️ might as well print up my WML ND caps while I’m at it.
really getting milage out of that aliexpress motorized table
💎💎📹💎💎
Laserspeed is cool but how do you feel about womens rights
Enough about womens rights, I want to talk about womens wrongs.