so, it looks like it is easy. believe me, it is not. you have to really pay attention to detail!!!! once you have done that it is a peace of cake (almost). one has to see the video three to four times. oh yes, you need to know a bit of electrician work, to be able to connect the wires. it worked for me good. thanks for the video and the idea.
+Emily Allyce The setup usually comes as a kit with instructions.Installation may look challenging but it is fairly easy.The kit I bought cost £680 (UK) but you can get them cheaper.The kit should come with a power unit, which the fiber optic strands are connected/plugged in to.the unit itself is plugged into the mains.drill holes into the ceiling or dark material you wish to use, feed fiber optic strands through holes,leaving excess/slack that can be trimmed off (as in video).Use silicone (not glue) to hold strands in place,unless you want to use the "mushroom" buttons that may come included in the kit.Place your "starry" material (as in video),connect it up and pretty much voila.
Видео от американской компании Supervision,эксклюзивным диллером которой мы являлись с 1995 по 2010г в России до окончания существования этой фирмы. В 2008г патент на производство акрилового оптоволокна утратил свою эксклюзивность с истечением времени и производство сейчас в основном в Китае и Японии.
god...I remember doing this on one work.... damn above 500 fiber lines each had like 3-4m long (each string)... it was hell... but the effect would be better if the black surface had a light reflective cover or paint... it wouldnt give the dull empty effect but it would give a shinny effect to it ^^ the same I was doing smaller (1fiber) and bigger (6-7fibers together) stars... so it gave the effect of some constalations and such ^^
This shows the piercing of one panel and placing the fibers into the holes, but how many light sources, arrangement of light bases of fiber clusters, attachment to electrical wires, etc. is still a mystery to me. I don't know why it's so difficult to find a concise demonstration of this process.
Sister we have to read Quran I have seen you comment wish for nabil qureshi martyrdom he was insulted our prophet Muhammad s.a.w even though he died by stomach only Muslim are martyrdom ok
Not bad. I would like to see this on a bigger scale.
Well done.
Omg that looks super easy!
so, it looks like it is easy. believe me, it is not. you have to really pay attention to detail!!!! once you have done that it is a peace of cake (almost). one has to see the video three to four times. oh yes, you need to know a bit of electrician work, to be able to connect the wires. it worked for me good. thanks for the video and the idea.
Aquilo que passou na fibra é cola convencional? Ela que faz brilhar mais forte a luz?
I'm pretty sure the Rolls Royce factory uses elmers glue as well...
Yea but this is 50 bucks vs 12k...
@@miguellira9903 Something like hot glue, epoxy, or a high viscosity superglue would work better than PVA Elmers glue
@@meercreate hot glue won't work, it'll just melt in the summer
@@miguellira9903 Ok then. What about epoxy, high-viscosity CA, or something like e6000?
can you use a 0.5mm drill bit on a normal drill instead of a dremel tool?
What do you call that tool your using to clip the fibers flush? I know a wire cutter is fine but yours seems to be able to get a closer cut.
What is the hole punching tool and does it have different diameter tips for different diameter fibers? (0.5, 0.75, 1.0, 1.25mm).
how about the light source.. where would you place it?
Is it like for each tile, there is a separate light source?
ola como estas te preguntó como puedo conseguir esa fibra ogtica me gustaría armar imponer en mi cuarto por fa en medellin
@DJPaulgee1 would u know where I would be able to buy an LED circuit to give me the twinkling effect?
looks awesome
im making this for my car since i need a new headliner anyways.
how did it go?
did you find out what the light source is?
great job!
well where was the show ! we should see the end results geeeee
Cool idea and I really want this, but it looks like so much work and I don't know how I would install it or where the light would go
+Emily Allyce The setup usually comes as a kit with instructions.Installation may look challenging but it is fairly easy.The kit I bought cost £680 (UK) but you can get them cheaper.The kit should come with a power unit, which the fiber optic strands are connected/plugged in to.the unit itself is plugged into the mains.drill holes into the ceiling or dark material you wish to use, feed fiber optic strands through holes,leaving excess/slack that can be trimmed off (as in video).Use silicone (not glue) to hold strands in place,unless you want to use the "mushroom" buttons that may come included in the kit.Place your "starry" material (as in video),connect it up and pretty much voila.
Видео от американской компании Supervision,эксклюзивным диллером которой мы являлись с 1995 по 2010г в России до окончания существования этой фирмы. В 2008г патент на производство акрилового оптоволокна утратил свою эксклюзивность с истечением времени и производство сейчас в основном в Китае и Японии.
god...I remember doing this on one work.... damn above 500 fiber lines each had like 3-4m long (each string)... it was hell... but the effect would be better if the black surface had a light reflective cover or paint... it wouldnt give the dull empty effect but it would give a shinny effect to it ^^ the same I was doing smaller (1fiber) and bigger (6-7fibers together) stars... so it gave the effect of some constalations and such ^^
Nice done
is it possible if i use nylon?
This shows the piercing of one panel and placing the fibers into the holes, but how many light sources, arrangement of light bases of fiber clusters, attachment to electrical wires, etc. is still a mystery to me. I don't know why it's so difficult to find a concise demonstration of this process.
Is that fishing line or specific wire?
fiber optic stranded cable
tank you
Cool!!!
do you have any branch in UK? i am interested
+Asim Khan Where to buy plastic optcial fiber from factory and manufacturer? visit www.bones-electronics.com
was this filmed in the 70s?
Where will I get this fiber roll
Ebay
now that is cool
Today's Rolls-Royce Wraith...
روعه
yeah that would be nice but the price is ridiculous.
i like the idea but it look too small.!!.
Very cool. Can you use a hot glue gun with the fibre optics?
السلام عليكم اني داخل العراق اريد استورد الياف ضوئيه
وانا بدي استورد اذا عندك مصدر خبرني لوسمحت
hot glue would work better i think.
Hot glue might melt the cable
i got mine off of eBay.
that's one, 38 more tiles to go
Oh dear please.....
kerenn
I bought mine from a company named WIEDAMARK. If you search for the name you should be able to find easily
nice, but WAY expensive
This is okd
Would a hot glue gun be a little more practical?
its not!! all u need is few leds and the plastic/fiber strands
W t f ..14 years ago
Went super cheapo on the glue
Old
some of you guys use big words -.- !
Sister we have to read Quran I have seen you comment wish for nabil qureshi martyrdom he was insulted our prophet Muhammad s.a.w even though he died by stomach only Muslim are martyrdom ok
looks stupid, I'm gonna look for another way to do that
Pavel Fedorov You look stupid