Replacing more front end parts on the 2019 Sierra Denali 2500HD build Part 5
ฝัง
- เผยแพร่เมื่อ 17 ต.ค. 2024
- The 2019 Sierra Denali 2500HD is back. The roof is painted so we can put some of that back together. My arms are tired from trying to steer this monster without help so we need to replace the gear box. I did find a surprise so we have some additional body parts to change. Then we will get the rest ready for paint!
My website if you want to purchase a car or parts: www.vehcor.com
Amazon store: www.amazon.com...
For Vehcor merch: teespring.com/...
#GMC
#Sierra
#Denali
![[Gegagedigedagedago] NEW Help Gegagedigedagedago Nugget escape from Nikocado Avocado Challenge](http://i.ytimg.com/vi/hJWnwRC2Fz8/mqdefault.jpg)
GM finally gives us a real top post battery and then takes it all back with that insane junction block...
I know, right? They just can't seem to get the "battery should be easy to boost and get to" thing right obviously.
I wish i could find a reputable body man like you in Houston. Your attention to details is off the charts. Keep up the good work
That was a massive amount of work to replace the fender and also the gearbox which we call a steering box here in Australia. Shouldn't be too long now and the truck will be finished. All you need to do is not sell it and you'll have a nice almost new truck to replace your existing one. And remember, this truck has all the extras that you've always wanted, so hang on to it tightly. All the best from Queensland Australia.
Good afternoon Scott and thumbs UP to you . Happy 4th of July to everybody !
Friday!!!! Roaming Gnome to the rescue! Battery tray removal looked challenging. Lucky it's not a Ford, because it would have had 8,000 spot weld...
my buddy works at GM parts in MI he told me years ago that black primed parts were designated to go to service parts and olive as you call it were slated for assembly plants but he said sometimes GM is short in service parts and grabs them from the line group parts bin, but he also said never the other way as some service parts have imperfection in them.and the line will not allow that.You will see almost all inter structure parts are Olive too.You can feel more comfortable about quality when you get a Olive colored parts as they are normally slated for assembly plant.and sometimes they send end of line leftover part to part ware house when that body style changes Just find that interesting .
GM sent us parts managers a bulletin a little while back stating that we may now receive Olive primed service parts instead of Black primed.
Your Friday videos are the only reason I remember it's already Friday
I have been looking forward to this video since this morning. So to take the edge off the agony of waiting I watched an episode of the Terrain build over again.
Thank you. Will never understand why one watches a pro do perfection but yet has to question, criticize and give useless suggestions. I just sit back and watch your show, smile, giggle and learn.
He’s totally gunna cavity wax that door seam when the painting gnomes are done 😜
Never before though. Auto body guys get pretty touchy about using that stuff before you bring it to them. Ever want to see someone lose their temper, watch a body guy find fish eyes in the vehicle they just painted because of something like that. Father in law has been doing autobody for years. Stories he tells me are pretty funny.
It's so sad more "painters" don't understand the concept of removing those items that should not be painted. They had rather take more time taping up rather than remove those pieces. Because when they tape up, they then must take time to remove unwanted paint.
Bit confused by gearbox turning out to be the steering box in the uk. Gearbox in uk is transmission across the pond. Another great, inspirational video.
Don't forget the sway bar = Anti-roll bar over here and don't get me started on the whole wheel tyre thing again. :-)
It's probably an Indiana thing.
@@amascia8327 except he’s in Illinois….
24:40 It's that darn Troll Train again and Mr. Spotty was hanging there and smiling as usually while you and the gnome where struggling to the sunroof installed!
The traveling Gnome came in handy in this episode
I love the GMC Denali builds!
You should have ordered a pizza while on your break. Lol
It was good to see Mr. Spotty looks so very happy inside on the A-Pillar of your new/future Truck. Perhaps, you should leave him there.
Respect man 👍🏽 my favorite Friday channel keep it up brother I learned to much because of you the main thing I learned it's patience love from Dubai 🇦🇪
Great video as always,150,000 subscribers now brilliant ,you deserve them,I remember when there was just a few thousand of us
The amount of work needed to repair what looked at first to be minor damage is astounding. Anyone who complains about the cost of body work should watch this first.
You're the only one I know who could bench press that awkward steering box with one hand. Nice work and thanks for sharing
Project is coming along great
Thanks again for another great video. You need a "In the Pile" hoodie
Looking great Scott! Your builds are superb 👌 Happy 4th of July! Stay safe!
Hey, I just thought of a great idea for the roof edges that fit in the channels! Just fill the channel half full of some kind of expanding glue, put the roof in place and fill in the rest of the channel with more glue. Put the channel trim in on top and clamp it down. Take the rest of the day off. You're welcome.
Just found your channel last week, I really enjoy watching your craftsmanship and humor. Thanks for the videos.
Yay!!! Love the GM content. Super nice build!
"I've been told you have to take the springs off before you take the hood hinges off."
There's the damn safety committee getting involved again. Have a great Independence Day, Scott. Get a few burnouts in because....'Merica!
9:28 Since the 2000's or so GM has been using a sealed power steering pump cap. If the steering wheel is turned many times with the engine off, fluid from the gear is pushed into the reservoir causing pressure to build.
Put kryptonite brand steering , ball joints, and hub assemblies on gm trucks from 99 to 19 and you will never replace again. I buy mine from the dmax store. I have the upper A arms lower ball joints, inner outer tie rods, steering linkage, and hub assemblies on my 04. Love them massive parts for reasonable prices. I will never have to buy again. Lifetime warranty no questions asked. Love the channel.
Liked the oops. Got a good laugh. During the day I find my self saying "in the pile"
I love watching vehcors videos because he tells you what he's doing and he get it done in a timely manner I can't wait to see what he builds next hopefully it's another durmax because I love the sound of thr durmaxs
Scott you are always an inspiration! You do your work in a efficient but quality orientated way that so many these days don't! I always look forward to the next video!
Geez I wish I had your talent!
Thanks for sharing your adventures!!🤗🤗
Watch the fingers if you're going to play with the boom booms this weekend,still enjoying your videos THANKS a bunch🤗😎🤗😎
Heck yeah, Front end Friday is here!! Awesome as always
Edit: Huge lol at the "I'm not in to all that", I'm sure that's not the first or last time that's been said there haha
Good Job Scott!."Happy Fourth" weekend! Thanks for the show-lotsa work well done! Rich
Your attention to detail is outstanding 👍👍👍👍👍
@vehcor I hope you have a great 4th of July !
Excellent work sir, ty for the detail to your work and incredible diligence to doing the job right the first time.
Had 2 new front fenders placed on a 2005 Blazer. From your VLOG I learned to get him to cavity wax things and he also applied rock shield. Fenders rusted out because I got the option step to get in Blazer. Rocker panels were also rusted under the step.
Nice job. The number of door panels you've removed must be in the hundreds lol. 👍👍👍
I love your videos just enough humor and information to keep my interest keep up the good work !
Just got done for the Holiday weekend.. fixing AC..whew... its hot and humid here in Philthadelphia. Great work.. thanks for sharing. Have a great July 4th weekend.
Being new to this channel I have to say it's very satisfying and I look forward to the updates every week. Nice work and Happy 4th everyone.
It's always a good week watching the four masterkateers. Wes,
Professor "O" and Scott. If all of you got together and started your own corporation... you could be the next
Magna Part II. Almost forgot about
Ivan.
Love your beautiful work. Not many people have pride in their work
Glad I subscribed to this channel. Great work! I almost wish I could buy a wrecked truck and have you rebuild it. They come out better than factory.
AHA, a Mr Spotty spotting‼️ Always great to see the little dude👍 Another great video, Scott. Looking good.
3:14 you pulled the over flow coolant reservoir out. FYI as a GM technician, the lower part of your reservoir is low on fluid, likely from an earlier recall or from factory that way. It's a pain to fill, as it gets fluid from the very top of the fill hole and runs through a small passage in the seam of the reservoir. If you take the side cap off, plug the overflow tube and slowly fill the reservoir from the top keeping the fluid right at the top, it will take about 3L very slowly, don't stop or it will air lock. When it runs out the side cap it's full.
Vechor, I don't know when i can meet you as I am far away from you. watching your shows are very interesting how you get about the build. great work. jerome
Ladies and Gentlemen...........Welcome to another Boring Build Friday..Presenting the man of the hour......Vehcor.... :)
Excellent work Scott! You sill be driving in supreme luxury in no time The battery setup isn't the dumbest GM design ever, but it is way up there.
Painting gnomes are earning their money(or whatever they work for)on this one.
Another good one!!!!
hi I think you do things great.Im a 30 year bodyman painter fulltime and do paintless dent repair.most dents now i can fix with towers glue pulling and using rods through top of doors tailights ect.I dont think the craft some of us have is even cared about anymore.its taken for granted point a to b customers.insurance companys cut our estimates ect.customers think we overcharge which we dont ect.most times we lose money.controlled by the insurance companys where as a mechanic you are not.so many things you learn over the years.i was good at painting the old conversion vans waldoc s-10s ect but then times change then learn new stuff again lol but still pay is crap to this day now im 59 and still struggling and still working full time
You're supposed to work until you're at least 62. If you work your ass off, at least it's good honest work, ain't it! He John, do yourself a favor work until you drop. It's not fun if you retire with nothing to do.
Love this truck. Only thing that would make it better is if it was red!! Nice work as always man.
You know how many shops would have just ignored the inner fender/firewall damage....
Right
Lovely vid, Scott. This is such a lovely looking ute.
It was Fender Food Week at GM and Olive Day when they produced your fenders...you got one green & one black.
Looking better everytime. Have a safe Holiday
perfect time to add cab lights.
150 K Congrats!
The most work I remember seeing on a 33min video. I hope everything works..
Coming along nicely
I see your up on all the new noun terminology.
Man, watching you work on that thing really makes me appreciate just how open the engine bay of my 85 silverado actually is
Do you keep the primer on the new panels or do you take that off and redo as part of the rebuild? Great job so far can't wait for the next video. thanks Happy 4th.
My impact also identifies as a torq wrench 🤣
My ratchet wrench also identifies as a hammer
@@CR7659 hey good call mine too
Hey Scott, great video series. Did the Afternoon Crew get fired? Haven’t seen them in a long time…
It's boring build Saturday for us. I look forward to it always
Those pitman arms must be really bad, you mentioned it twice.
How do you resist the urge to reinstall those letters so they say "Denial" and see if anyone even notices?
You have to be in Denial to buy a Chevy so it would make sense
You don't fool us. That wasn't a truck hood - it was your new patented tool launcher. LOL. Thanks for another great video!
Wow, look at the size of that airbox. Hope you checked for the presence of other vehicles or even human survivors that got trapped inside.
A 2019 - 2020 Honda Ridgeline Sport 2 wheel drive automatic base model NO sun / moon roof. When you mentioned the used roof it popped into my mind. Why would the yard cut a roof off a perfectly good cab? If it wasn't good would the roof be in good enough shape to use?
I always enjoy your Friday video thanks
great job keep going waiting next video
yup I have no issues in breaking clips so the Ins. can pay to replace them. After all they have no issues in deducting an hour here and there on my sups
Have a great 4th Scott. Great video.
Under the right circumstances, any tool can be a hammer. Just need to think outside the box.
Im awaiting the day that the roaming gnome does a channel takeover like the afternoon crew did a while back.
On the west coast a "gear box" is your transmition..with the gears in it. We call that part a steering box.
The gnome is playing a bigger and bigger role. Time for a promotion! I support gnomes!
He seems to be replacing Mr spotty more and more
I picked up that hood removal method from one of your older videos, used it a few times so far and it's been a life saver, especially when I don't have any help.
@vehcor - do you have a recommended weld through primer you like to use? I am getting ready to start replacing floors, cab mounts and rockers on a 93 S-10.
You told the pitman arm joke twice. But I laughed both times.
How do you remember where all the hardware goes. I recently had my truck fixed because of hitting a dear. It doesn't look like they put the correct bolts back where the were supposed to be. I will have to fix it myself. Love your work. I would not hesitate a minute about buying a truck you fixed.
So do these L5Ps have stainless intercooler tubes instead of the usual aluminum ones?
Odd but they must have a reason.
Is their another way to remove the molding if we dont have the arm strength that you have? LUVE THE CHANNEL!
I’ve read that hood fits on a Sierra 1500 but the hinges require some modifications, as you work on these vehicles do you have any insight one this. I love that hood.
Remember gnomes...do what Scotty says, not always what he does. You mean the hood wasn't supposed to do that? LOL
Sunroof yoga, and videoing it? That could be a new class to teach.
Gonna be a purdy truck when finished...even with all the hater tears...hah.
Thanks for the video. My favorite channel.
I have one question if you need to buy new door side molding where would you go to buy it, I just had my passenger door replaced because somebody was nice enough to hit me in the parking lot . It's a 2016 crew cab with chrome trim
The roaming gnome doesn’t look nearly as good as the afternoon crew👍
9:22 this was filmed on “Taco Tuesday”
I love this build
Laying like that makes your back feel better. I lay on the floor and put me legs up on the couch.
Gonna be a true beauty
17:51 wait, you didn't show us you fixing simon!!
Vehcor: simon? wtf you talking about?
Me: Yes simon, simon cowl
Vehcor: where's the freaking ban button!!! lol
As always another great video matey.