i just bought a carrier ultra xt and i notice once the temperature is about to reach the set point the heat light will come on then go off then the cool light on then go off then the heat come on and on and on and on all day any suggestiions but the temperature stays between the set point and 5 degrees higher
Amado Espinoza what that means is that the unit has reached the desired temp and will try its best to keep temp between perimeters. If you put at 32 the unit will try to stay above 32 because it does not want to go below that temp to prevent freezing product. I'm guessing that's on continuous mode? Because on start and stop will go a couple of degrees below the set temp and shut off.
Amado Espinoza It could also mean that the product inside was hotter than the set point (it happens a lot when you load fresh produce) and it's trying to get it down to the set point but it takes a while a mean a long while, according to my mechanic 2 degrees per hour that's why it is important to check the product temperature before you load it so no one can screw you when you attempted to deliver, and it's alternating between heat and cold so it won't freeze it self up and also to get some of the humidity out, it would do the same thing one it reaches the desired temperature but it only be about 1 degree either above or below the set point good luck with your new reefer you just bought by far one of the best units available in the industry
so today i pick 3 pallets of beverages the temp needs to be between 45f and 35f so for the first time i use start and stop mode and i notice a red light on the code square then i read high pressure from the display then the light goes off and displays says no alarms but ONLY ON START/STOP MODE temp box runs around set point set point 38 box will run 37/38/39
Dimitris Poim the unit has high head pressure meaning it too hot outside and or the inside product was loaded at a high temp and the unit is struggling to cool it down.
@@solidbriskjatt mmm ok. ... but the fault shows in the first second and some times is always with this fault for 2 or 3 days and cant start and with out any any reason i started again and work ok for days
Amritpal Singh mine is also showing high pressure and shutting it off when it’s really hot out and when they loaded product that was too warm, any solutions for stopping this? I’ve had this unit for awhile and I didn’t do it before. What i do to keep it running is I set it at the box temperature until I get the unit running.
Oi que fasso o aparelho carrier 1800 esta dando erro3.
i just bought a carrier ultra xt and i notice once the temperature is about to reach the set point the heat light will come on then go off then the cool light on then go off then the heat come on and on and on and on all day any suggestiions but the temperature stays between the set point and 5 degrees higher
Amado Espinoza what that means is that the unit has reached the desired temp and will try its best to keep temp between perimeters. If you put at 32 the unit will try to stay above 32 because it does not want to go below that temp to prevent freezing product. I'm guessing that's on continuous mode? Because on start and stop will go a couple of degrees below the set temp and shut off.
Amritpal Singh alright makes sense now thanks for getting me out of doubt first time using carrier reefers
Amado Espinoza It could also mean that the product inside was hotter than the set point (it happens a lot when you load fresh produce) and it's trying to get it down to the set point but it takes a while a mean a long while, according to my mechanic 2 degrees per hour that's why it is important to check the product temperature before you load it so no one can screw you when you attempted to deliver, and it's alternating between heat and cold so it won't freeze it self up and also to get some of the humidity out, it would do the same thing one it reaches the desired temperature but it only be about 1 degree either above or below the set point good luck with your new reefer you just bought by far one of the best units available in the industry
so today i pick 3 pallets of beverages the temp needs to be between 45f and 35f so for the first time i use start and stop mode and i notice a red light on the code square then i read high pressure from the display then the light goes off and displays says no alarms but ONLY ON START/STOP MODE temp box runs around set point
set point 38
box will run 37/38/39
Amado Espinoza it's in continuous run mode. It basically goes back and forth from cool to heat to keep the temp around the same temp
What is the model # of the engine? Its Kubota?
Thanks
Carrier running and cut
Anyone have a wiring diagram for an ultra xl?
hello ..i have carrier model nu.1998 it have 19 numbers that i dont know how to use ..if you can help me ..thank you verry much .
hello mate the fuse bad fault
I have 2005 carrier ultra it don't want to start it's gives me a shit down code that doesn't want to erase I need help
thanks
I have a carrier ultra but the display panel won't show any number what can it be
Fuse
whats all 19 numbers for ? if some one can help me ..thnx
How can I set my defrost for a# if times?
Settings defrost 6hrs
Reeferworks.thinkific.com
How to unlock keyboard
how you use the pretrip
Reeferworks.thinkific.com
Traduzir em prtugues
Hi press fault ...solutions pls?
Dimitris Poim the unit has high head pressure meaning it too hot outside and or the inside product was loaded at a high temp and the unit is struggling to cool it down.
@@solidbriskjatt mmm ok. ... but the fault shows in the first second and some times is always with this fault for 2 or 3 days and cant start and with out any any reason i started again and work ok for days
I know its hard to understanding my English happy new year !!!!
Amritpal Singh mine is also showing high pressure and shutting it off when it’s really hot out and when they loaded product that was too warm, any solutions for stopping this? I’ve had this unit for awhile and I didn’t do it before. What i do to keep it running is I set it at the box temperature until I get the unit running.
u should churge the battery!12.3 Volt - too little for work.
Bug Buggins I just did not have the time