I don’t know how many videos I’ve watch on fixing paint scratches. They all look to easy to be true. This is the first technique that really make sense. Nothing worthwhile is easy. Thank for sharing your skill.
I saw this technique (using bondo to protect the surrounding clearcoat) and really want to try it for myself now...- A superb & gifted repair! Well done and thank you for sharing 🙏👍
Can you try this trick with other colors? Black is the best color to match. I will like to see this in trick for example on a two stage color when you need pearl.
@@mikeb1039 its more of a 2 parter. So first it protrects the paint outside of the scratch. As youre sanding youre going to be sanding down clear around the scratch along with flattening the newly added paint on the chip. Second as you said it acts as a guide coat which will allow you to see if the paint is leveled or ot.
@@dujevideka1230 Hi mate, I have a non metalic waterborne uni color car. Can I also add hardener in the waterborne color? If yes how much? Got some paint left and want to fill some stone chips. Thanks
The reason you mix clear and base is because it helps with hiding the scratch? Just trying to figure out why. Youre the only one that ive seen that does this but also only one to actually make a deep scratch disappear
On the channel you have a few more videos with explanations of why and how, and on my channel there is nothing that is set up, everything is shown as real as it is
if you follow, you would see that the place where it is rough has been enlarged for polishing, which means that the red color is above that place, and you can see it at the end of the video 😉
before it took 24 hours due to drying, now it takes 2 to 3 hours because I use a UV coating that dries in 5 minutes with a lamp, and you have a video about it on my channel
For light scratches in the clear coat only this will work. No, you will not see the scratch through the clear. If the scratch is completely through the clear and into the base color then you will need to add paint first.
@@Amddetailing thanks for getting back what's the full product name I have found MIPA P35 Elastic Body Filler ?. On the buffing part is it a lambs wool pad and car polish thanks again
For the most part true. No body shop will spend that much time doing a second rate job paying employees top rate pay. This would only make sense for a DIYer.
You could shave of the excess paint with for example Mirka shark blade or Mirka mini file, then polish it. If you are lucky you don't need any wet sanding.
I’d agree. The process in the video is fine, but a nib blade would have cut off the primary high spots, cutting sanding time down. I use putty in a similar way. Thank you for sharing.
@amd_detailing is it possible you could please list the products use? I have a somewhat deep scratch from a bike hitting the side of my car - I'm hoping to replicate this process. Mostly interested in the blue putty that was in use. Thank you! Keep up the great videos!
the base, the coating and the hardener are fine, you also have similar problems on my channel that we solved by filling, so you can watch each video with an explanation
@@nullnoob Any body filler will do. By adding it when you block the area down you're less likely to go low on the surrounding areas. As long as you make sure you use a flat block and take the whole area as level as you can, you should be allright. Also it's a good visible indicator as quite you're progressing. Nice repair @Amd detailing! :)
Druže,moli te za pomoc.Nov sam u ovome.Dobio sam uz Einhell polirku nosač sunđera od 180 mm,ali sam čuo da je to preveliko.Koju mi veličinu nosača i sunđera preporučuješ za poliranje celog auta polirkom...150 mm ili manji?Takođe da li je za poliranje ogrebotina i oštećenja dobra veličina nosača i sunđera od 80 mm?Znači da li bi te dve veličine bile odgovarajuće t.j optimalne za rad...poliranje celog auta i poliranje ogrebotina i manjih oštećenja ili su po tebi bolje neke druge dimenzije?Takođe još jedna bitna stvar...koliko je bitan sam kvalitet sunđera...t.j. da li je dovoljno kupiti one Womax u WobiHouse koji su jedno 4-5 puta jeftiniji od Sonax ili Ewocar sunđera?Ili je ipak bolje kupiti Sonax ili Ewocar ili možda ShineMate sunđere?Koje ti preporučuješ za Hoby varijantu t.j. za poliranje samo mog ličnog automobila?Hvala unapred...
130mm i 150 mm ti je potrebno ,mada vise 130mm a sundzeri nekad rade bolje ti jeftiniji od brendirani sve zavisi od laka na autu tako da uvijek je potrebno imati vise njih i traziti kombinaciju koja radi
@@Amddetailing Uzeo sam Hobi Rotacionu Einhell polirku,Ewocar paste i sunđere.Od sunđera sam uzeo crveni t.j, srednji i bordo za finiš.Iako sam čuo pohvale za Ewocar paste i sunđere...sa crvenim sunđerom i njihovom jačom pastom Havy cut...često probijem i lak i farbu.Poludeo sam. :( Ipak treba praksa i detaljniji savet vas koji ste duže u ovome.Ne može to tek tako da se radi.Sigurno treba znati kada pritisnuti,kada polirati samo težinom same polirke...bez pritiska i kada prestati sa poliranjem.Mada i ova polirka ima minimalnu brzinu od 1000 rpm t.j. obrtaja što nije malo...čini mi se.I ne bi trebalo ići iznad 1100-1200 max...koliko sam provalio.Problem je što ne znam kada da stanem sa poliranjem i da li uopšte treba praviti bilo kakav dodatni pritisak na polirku!?
@@Amddetailing Kralj si probao sam drugaru danas ispalo je top samo ja sam tackao sitne tacke pa smirglao ali po tvom principu rada.Minimum minimuma se poznaje 😎😎💪💪💪💪.Samo neznam onaj git kad koristis jel ti ono mipa p 16 plava boja??
there is another , easier way, with the polish machine and 1000 sand paper, you remove the scratch, (using water of course )Then you use a 2000 sand paper, then you use a compound cream with the polish machine, then a polish cream, then you use a wax and it s like new!
I have 5 to 6 deep scratches on my drivers side door. Some douche in a white Ford F-150 pickup with big ass tires was parked next to me at the golf course parking lot today. I deliberately parked in a corner. I came back and the white truck was gone. And I saw gouges on my drivers side door. The gouges went straight into the metal. It looked like he used a flathead screwdriver too. Karma is a Biotch. Thank God we have auto insurance.
to be honest, i have done the same but i ended up fucking up my paint next to scratch because of sanding. should i just put paint there also and start the job over? i dont understand how u guys can keep sratching on same spot so long and not going tru the orginal paint job. at the end its not all this hard guys the biggest mistake (i and mostly all of us make at the start) is we dont really put enough layers of paint. infact we put to few so the paint we retouched is below the orginal paint job. if you manage to put paint above the orginal paint job u can lvl it down to the orginal one and have a quite decent fix (im not saying u gonna get it perfect like the video :) ) if u fuck up like me where i put paint not above the orginal paint all over u end up fucking up the orginal paint job cus i kept sanding something that was actually lower then the orginal paint.
@@Amddetailing sir but mini scratch must be show when you work joint of paint must b show i am working since 15 years i know some things about paint job and about detaling
Very good job 👍
Those who love there cars can understand how these scratches hurt them.
Svaka čast, ovo je stvarno retko videti da čovek koji je profi, svoja iskustva i znanja deli sa drugim ljudima! Svako dobro u životu prijatelju...
Hvala prijatelju uzivaj
I don’t know how many videos I’ve watch on fixing paint scratches. They all look to easy to be true. This is the first technique that really make sense. Nothing worthwhile is easy. Thank for sharing your skill.
thank you, I made the channel different from others where the real situation is shown without hiding it
enjoy
Can you list all these products which you use
I saw this technique (using bondo to protect the surrounding clearcoat) and really want to try it for myself now...- A superb & gifted repair! Well done and thank you for sharing 🙏👍
Svaka cast, ovo jako rijetko neko hoce sa ostalima podijeliti. Kapa do poda. Nema sta, sve najbolje u buducem radu.
Hvala prijatelju
@@Amddetailingwhat’s the needle thing u use mate do u have a link to it
a dental needle,you have on ebay
@@Amddetailing u have the link for it my friend
@@Amddetailing what is the needle size u are using friend
Bravo majstore! Svaka čast na tvom radu, zaista impresivno!
Hvala prijatelju😉
Vidi se da treba vremena i vještine da se uradi kako treba. Posebno je dobro sto se cuva originalna boja i ne farba se kompletan panel. Svaka cast!
Hvala prijatelju
Majstorski odrađeno, svaka čast 👏
Hvala prijatelju😉
I sam se bavim detailing-om, al ovo što sam vidio na tvom kanalu je next level.
Hvala brate ako sta zapne tu sam imas me na fb Alen Tataragic
Instead of sanding endlessly to level the filled scratch I would recommend using a mirka mini file to level it down fast. Then sand it lightly :)
I bought the mirka mini file and Mirka S-BLADE Shark Blade Denibbing Tool, the later might even be easier to use than the mini file.
A million likes and a thousand thanks
👍🏼
Tnx bro
Can you try this trick with other colors? Black is the best color to match. I will like to see this in trick for example on a two stage color when you need pearl.
Pearl is a tri-coat. You can't match tri-coats that way, you have to paint the entire panel. Basecolor, Pearl, then the clear coating.
Expert Job ! Great Work...thank you
Good job! 👍
For sanding a shim-mask for example the Devilbiss Shim-Mask could be useful for protection.
amazing work bro, looks very good! greetings from Mexico!
Tnx friend
Im fascinated by that blue filler step. It seems genius…….
+1 - is it just to show you when everything is finally flat?
@@mikeb1039 its more of a 2 parter. So first it protrects the paint outside of the scratch. As youre sanding youre going to be sanding down clear around the scratch along with flattening the newly added paint on the chip. Second as you said it acts as a guide coat which will allow you to see if the paint is leveled or ot.
I agree that filler protection is a brilliant idea to protect the surrounding paint.
Svaka čast kolega, izuzetan rad, mnogo truda uloženo, rezultati su odlični!
Hvala brate😘
Nice work..... came out invisible👍
Tnx bro and welcome to my channel
Много трудно изглежда за обикновения човек , поздрави супер клип 😊
Hvala
Ja sam vidjeo samo baza da se nanosi ..a sta je sa lakom?..Veoma lijepo..svaka vam cast
Zamjesana je baza lak i herter zajedno
Hi firstly thanks for the video, just i'm wondering about the blue protection u used what is it exactly
body filer
Top, majstorski nema sta 💪
Hvala😉
Nicely done. So is the body filler just to show you when it's level? Very interesting.
Yes that's right
@@Amddetailing brilliant!
Well done. Looks tops
awesome job
Svaka čast 👏👏
Hvala
Wow this is amazing.
Tnx
Crazy lol. Awesome stuff
Tnx bro
Hi great job..Is the blue paste putty for plastic?
it is not, but it is soft for sheet metal
Prachtig gedaan top job 🤩
Olha só, ficou perfeito......
Parabéns.....
Tnx
Wow!!! it pays to be patient. great job
Tnx friend
Base: clear: hardener
4:2:1 ?
Why is it good to add the clear into the mixture? It is more durable?
Thanks, great work!
Excelente trabajo, saludos Mexico
Tnx bro
Nice work, where can i get that filler? Is that just bondo?
ebay,aliexprers
Sick.! Holy Sh*t Nice work 👏👏👏👏👏
Tnx bro😉😉😉😉
Świetna robota 👍
👍
Odlican posao ..dali je ovo sto spricate obicna voda ili neka specijalna tekucina.? Aferim umjetniče.!
After I messed up my 2023 truck I found this realistic video
I hope it will be useful to you in the future
Guys he changed the panel. allow it, can never get this result
True. He did n is not same spot for that u need Bando n paint all the part
look below which letters were made 😉
Is that blue puddy a body filler? Bondo?
Body filler
What type of putty did you use as masking surface?
Nice job 👏
Tnx my friend
Poštovanje, odličan posao ! Vredi truda i sačuvati prvu boju !
Postoji li sličan servis u Srbiji ?
Koliko košta i traje ovakav zahvat ?
Ne znam za Srbiju a cijena zavisi od dijela koji je ostecen
Wowwwww
Do you have to use the two-part clearcoat with Hardner? Can you spray some clearcoat that’s in a can in a cup and mix the paint with that?
It's enough just to mix some hardener in basecoat.. Like 4:1 is plenty
@@dujevideka1230 4 pieces basecoat and 1 pieces hardener?
@@alexanderschindler9714 yes
@@dujevideka1230 Hi mate, I have a non metalic waterborne uni color car. Can I also add hardener in the waterborne color? If yes how much? Got some paint left and want to fill some stone chips. Thanks
Awesome job, but i cant find that blue putty to protect this procedure
Pretty sure its bondo with body filler hardner mixed in, basically autobody filler 👍
AMAZINGGGGGGGGGGG!!!!!!!!!!!!!!!!
Tnx bro
The reason you mix clear and base is because it helps with hiding the scratch? Just trying to figure out why. Youre the only one that ive seen that does this but also only one to actually make a deep scratch disappear
On the channel you have a few more videos with explanations of why and how, and on my channel there is nothing that is set up, everything is shown as real as it is
May we fill the scrach with color base and then to use a spray clear cote above?
it is possible, but it is safer to mix everything together
@@Amddetailing Thank's! Greetings from Bulgaria
What is the body kit for safe operation?? Could you give me product name what you used it? I mean the blue things.
Mipa Soft (body kit)
Can't find it anywhere 🤷🏻♂️
@@gufiaito69able e bay link
@@pedersen3077 where?
@@gufiaito69able cant find a blue one....
And just like that at 7:09 red writing on the hood has disappeared magically as well!?
if you follow, you would see that the place where it is rough has been enlarged for polishing, which means that the red color is above that place, and you can see it at the end of the video 😉
@@Amddetailing 🪄
Great job, I wish you all the best
Tnx friend😉
How to you know you dont sand trough the base coat
Wow 🤩
Good work brighter
Tnx bro
I'd like to know how long that whole process actually took
before it took 24 hours due to drying, now it takes 2 to 3 hours because I use a UV coating that dries in 5 minutes with a lamp, and you have a video about it on my channel
Very good job 👏
What is a body kit (soft) and where I can find it?
I wanna improve my skill. Do you think you can be my mentor? Thank you
What happens if you just use clear coat on a scratch? I suppose it just seals over it and the scratch is still visible through the clear coat?
nothing will happen, you have to apply the paint
For light scratches in the clear coat only this will work. No, you will not see the scratch through the clear. If the scratch is completely through the clear and into the base color then you will need to add paint first.
how long will the polish last?
Does it works on bright colors?
Jel mora ic herter kad se mjesa baza i lak skup je, sta ako ga pomisam s bazom bez i probam?
Herter je ucvrscivac za lak mora ici herter jer se lak bez njega nece osusiti ni za 100 godina
are mixing the clear and base coat 1-1? or are you using more base?
2:1
@@Amddetailing thats 2 parts clear 1 part base correct? you want more clear than color?
@@LuisNazarioRatKiller base 2 clearcoat 1
@@Amddetailing 👍👍👍
What is the make of body filler you are using please
Mipa soft
@@Amddetailing thanks for getting back what's the full product name I have found MIPA P35 Elastic Body Filler ?. On the buffing part is it a lambs wool pad and car polish thanks again
@@Amddetailing can you tell me witch mipa they do a large range
It's great! Perfect! 🙂👏👏👏👏👏👏👏👏👏👏🙂
Tnx friend
Why was the blue dough placed?
So you aren’t sanding other areas. You can see what’s not leveled
Amazing
Be careful if your paint is thin, you could go down to bear metal with sanding
It is a lot better and cheaper just to respray the entire bonnet given the time taken to do this work.
For the most part true. No body shop will spend that much time doing a second rate job paying employees top rate pay. This would only make sense for a DIYer.
Very very good job!!! 👏👏
Tnx bro❤
You could shave of the excess paint with for example Mirka shark blade or Mirka mini file, then polish it. If you are lucky you don't need any wet sanding.
Too deep
I’d agree. The process in the video is fine, but a nib blade would have cut off the primary high spots, cutting sanding time down. I use putty in a similar way. Thank you for sharing.
what is the name of blue paste?
Hey bro how do I contact you? I live in hawaii and I have a job like this coming up
we heard each other on instagram
How you don't go through the factory lacquer I don't know unless you have it relaquered beforehand. 😢
What kind of body kit blue paste is this? What is it called?
Soft body kit
@@Amddetailing Who makes it? I can't find it when googling.
Amazing!
Tnx
@amd_detailing is it possible you could please list the products use? I have a somewhat deep scratch from a bike hitting the side of my car - I'm hoping to replicate this process. Mostly interested in the blue putty that was in use. Thank you! Keep up the great videos!
the base, the coating and the hardener are fine, you also have similar problems on my channel that we solved by filling, so you can watch each video with an explanation
@@Amddetailing mostly was interested in the products used - the blue putty do you know the brand name by chance?
Mipa soft body
@@nullnoob Any body filler will do. By adding it when you block the area down you're less likely to go low on the surrounding areas. As long as you make sure you use a flat block and take the whole area as level as you can, you should be allright. Also it's a good visible indicator as quite you're progressing. Nice repair @Amd detailing! :)
cant you add hardener
to speed it up
Yes you cant
@@Amddetailing can or can’t?
Druže,moli te za pomoc.Nov sam u ovome.Dobio sam uz Einhell polirku nosač sunđera od 180 mm,ali sam čuo da je to preveliko.Koju mi veličinu nosača i sunđera preporučuješ za poliranje celog auta polirkom...150 mm ili manji?Takođe da li je za poliranje ogrebotina i oštećenja dobra veličina nosača i sunđera od 80 mm?Znači da li bi te dve veličine bile odgovarajuće t.j optimalne za rad...poliranje celog auta i poliranje ogrebotina i manjih oštećenja ili su po tebi bolje neke druge dimenzije?Takođe još jedna bitna stvar...koliko je bitan sam kvalitet sunđera...t.j. da li je dovoljno kupiti one Womax u WobiHouse koji su jedno 4-5 puta jeftiniji od Sonax ili Ewocar sunđera?Ili je ipak bolje kupiti Sonax ili Ewocar ili možda ShineMate sunđere?Koje ti preporučuješ za Hoby varijantu t.j. za poliranje samo mog ličnog automobila?Hvala unapred...
130mm i 150 mm ti je potrebno ,mada vise 130mm a sundzeri nekad rade bolje ti jeftiniji od brendirani sve zavisi od laka na autu tako da uvijek je potrebno imati vise njih i traziti kombinaciju koja radi
@@Amddetailing Hvala puno.Sve najbolje...
@@Amddetailing Uzeo sam Hobi Rotacionu Einhell polirku,Ewocar paste i sunđere.Od sunđera sam uzeo crveni t.j, srednji i bordo za finiš.Iako sam čuo pohvale za Ewocar paste i sunđere...sa crvenim sunđerom i njihovom jačom pastom Havy cut...često probijem i lak i farbu.Poludeo sam. :( Ipak treba praksa i detaljniji savet vas koji ste duže u ovome.Ne može to tek tako da se radi.Sigurno treba znati kada pritisnuti,kada polirati samo težinom same polirke...bez pritiska i kada prestati sa poliranjem.Mada i ova polirka ima minimalnu brzinu od 1000 rpm t.j. obrtaja što nije malo...čini mi se.I ne bi trebalo ići iznad 1100-1200 max...koliko sam provalio.Problem je što ne znam kada da stanem sa poliranjem i da li uopšte treba praviti bilo kakav dodatni pritisak na polirku!?
Flat black!! Do it with metallic
What was the point of the blue stuff just to hand it all away
protects during sanding so that the factory coating does not break through while removing what you have filled
We’ve used this technique in the collision industry for as long as I’ve been in it well over 30 years
and ur point???
What is the blue product?
Bodysoft
@@Amddetailing thank you
After the fail, he didnt wanna waste the video. here we are
jel moze klip na sivoj boji
Siva boja se ne moze iraditi da se ne primjeti
Pozz jel samo na sivoj ili još nekoj drugoj pošto bih probao
what's the name of this putty?
I'd like to know too? Koj tip gita se koristi? Is it just fine filler?
Soft,mekani
@@Amddetailing you are link for purchase?
I don't have any link for the car industry but it's soft that it's easier for you to work with it
@@Amddetailing what is the name is that putty
Boja i lak se miješaju u jedno?
Da
@@Amddetailing i herter sve zajedno tako???Jel herter uzimas spori ili srednji??
@@milanpaunovic1429 da sve zajedno ako ne zurim normalni herter
@@Amddetailing Kralj si probao sam drugaru danas ispalo je top samo ja sam tackao sitne tacke pa smirglao ali po tvom principu rada.Minimum minimuma se poznaje 😎😎💪💪💪💪.Samo neznam onaj git kad koristis jel ti ono mipa p 16 plava boja??
@@milanpaunovic1429 jeste sto meksi da ti je lakse kit skinuti
there is another , easier way, with the polish machine and 1000 sand paper, you remove the scratch, (using water of course )Then you use a 2000 sand paper, then you use a compound cream with the polish machine, then a polish cream, then you use a wax and it s like new!
That will not work on deep scratches into the base coat.
Is it this true?!🤔🤔🤔
yes, check out the other videos on my channel, there are plenty of videos on that topic
@@Amddetailing thank you very much i will try it
Very informative. great job , but the music sucks!
👍👍👍
100% 👍💪
👌👌
How much I have a keyed scratch not that deep but hurts me 😡😡 means people jealous.
I have 5 to 6 deep scratches on my drivers side door. Some douche in a white Ford F-150 pickup with big ass tires was parked next to me at the golf course parking lot today. I deliberately parked in a corner. I came back and the white truck was gone. And I saw gouges on my drivers side door. The gouges went straight into the metal. It looked like he used a flathead screwdriver too. Karma is a Biotch. Thank God we have auto insurance.
Would of been easier and less work to just paint the whole panel !
Sir is not done 10/10 befor and after some problem
since it is only polished and without sanding and thinning the varnish on pure black color and very hard varnish, this is more than 10
@@Amddetailing it 5/10
to be honest, i have done the same but i ended up fucking up my paint next to scratch because of sanding.
should i just put paint there also and start the job over? i dont understand how u guys can keep sratching on same spot so long and not going tru the orginal paint job.
at the end its not all this hard guys the biggest mistake (i and mostly all of us make at the start) is we dont really put enough layers of paint. infact we put to few so the paint we retouched is below the orginal paint job. if you manage to put paint above the orginal paint job u can lvl it down to the orginal one and have a quite decent fix (im not saying u gonna get it perfect like the video :) )
if u fuck up like me where i put paint not above the orginal paint all over u end up fucking up the orginal paint job cus i kept sanding something that was actually lower then the orginal paint.
👋👋👋👋👋👋👋👋👋👍👍👍👍
Sir iam not satisfy
only you are not saturated, everyone has their own opinion
@@Amddetailing sir but mini scratch must be show when you work joint of paint must b show i am working since 15 years i know some things about paint job and about detaling