It’s 2022 and you just rocked my world! I have been watching video after video and they were all Stampin Up which I didn’t need. I was getting discouraged. Then I was researching Google which had expensive cling backing sheets - I got more discouraged. Then your video came up on my recommended list and this is what I needed! I have the glue on hand! I did see another video using Fun Foam to add the stamped image on back - add more Tack-It. Thank you so much for this!!!!
thanks so much for your video. great work! I stamped my stamps on plain paper, then laminated the sheets. once I finished getting them done, I store them on those, that I keep in page protectors in a note book.
wylie jones yes, it should be fine on the laminate sheets. Just be careful about the amount of glue you use, should be a thin layer. Too much glue and its a mess. I recommend trying on a stamp you don't care for at first. Have fun!
Best one I have seen so far. So many want to add more foam on the back or leave the foam that is there. Doesn't seem to me that that would do much good when using a stamping tool. AND the others went on and on and on and some were not organized. Thanks so much for a great tutorial that wasn't forever long!!!
Great video...I know this is older lol. That Aleens is terrific! I know it seems a hassle, but I stamp the image on a thin piece of acetate or vellum, fussy it cut around the image then glue it to the back of the stamp and put the Aleens on top of the acetate...I use acetate sheets because they do not wear down or decompose from the Aleens . I don't mind the extra steps but I know it would not be worth it to many lol :)
I too am very visually impaired so your tip is priceless! I had given up crafting completely . Love the way you explain your process. This was the easiest to understand video of all that I’ve watched. You have a relaxing way of speaking I really enjoyed your video. . Thank you so much for sharing your knowledge I can’t wait to put it to use in my own stash I’ll finally be able to craft again and get my stamps in order thank you so much.
Thank you so much for this video. All the other ones I have seen put a cushion on their cling stamps. I like this simple method soooo much better!!! I am so excited to try it!
I just watched a previous video that was so confusing on how to do this. Your's was so simple, straightforward and not lengthy like the other one. You gave some excellent tips too! Thanks!
Hi! I commented earlier about your video and how simple your method looked. You replied and wanted to know how I did with doing my own stamps. Well I am done, all but my Christmas stamps! Yay! Nearly 200 stamps have been successfully unmounted and turned to cling stamps. It took me a while but your method worked and I am very grateful. Thanks so much for sharing!!!
Oh, and I have made binders and cataloged all my stamps so i know what and where they all are. Sooo much better than dumping them all into drawers never being able to find what I want. 😍
What do you store the actual unmounted stamps on? I have a bunch from a yard sale, and I have categorized them, and now I need to stick them on something and store. Do you find that you do not need the foam on the back of them? I have a piece of foam in my Tim Holtz stamping tool, (like the Misti) and I guess that will give it enough "spring."
I just found the Aleen's in my stash!! I bought it to do this, but the video I watched was so many steps and this and that. Well yours was so simple I'm going to start today! Thanks so much for your sharing of this great idea!!! ~Liz~
Hugh tip. I just learned that when u heat the wood stamp, u can peel the image off the block. How cool is that? Also, if the foam peels off with the rubber, you not just leave it on?
Really!? What a time saver. The foam didn't always come away from the block in one piece and if it did the adhesive on it gave me issues. Thanks for the tip, I'm definitely going to try that.
I agree that your video was the best one. Thanks for the tip about the gum eraser. That’s the only thing I really wasn’t usngnthat will help me. I love getting my rubber off completely! Great video!
Well, I truly needed some help with some of the glue that just won't come off. In fact, I just worked on a few myself and now have a bunch I will use Tack It Over & Over (with my fingers BTW...easier) and then let sit overnight. Thanks again!
Hello, I am watching this on Tuesday, September 25, 2018. I don’t particularly like GooGone, because the smell lingers to me. Just a suggestion, try Citra-Solv, it take off adhesive so well, smell great and the smell doesn’t linger. Love the video.
@evelyn pinkard thanks so much for that suggestion, im going to look for that product, i, too, don't care for the smell. Btw today is the last day for my mini cling stamp giveaway if you sub to my new website www.naysworld.com thanks for watching!
Thank you. I should be putting out some new videos really soon and updating my website. However I do put new items in my Etsy Shop as often as I can. You can also find me on Instagram under @naysworld8 Thanks for watching.
can you leave the foam on the back of the stamp? thanks for sharing this video. I would think you could repurpose the wooden block into a mixed media base also.
I don't know how the glue would interact with the foam. I'd try it, if it doesnt work you can always take the foam off. Thanks for visiting my channel.
Great video! This is just what I needed! I have masses of stamps I need to remove from the wood. One thing I would suggest is instead of using the masking tape method you could just trim the rubber. I don't know if it's still the case but years ago when I was a Stampin' Up demo all of their stamps came unmounted and you had to trim the rubber before placing it on the block. I spent MANY an hour trimming stamps lol! Just be sure to use really sharp scissors. Blessings and thanks for the video 😉😉👍👍
Sherlene Mats this one is called stampoholic, but my favorite is Tim Holtz stamping platform. The original one is called the Misty. Cant go wrong with any of them. thanks for watching.
Yep, I have the Tim Holtz stamping platform. I'm sorry, I meant the eraser thing you used. You couldn't remember what it was called at the time of the video.
I have put my wood-mounted rubber stamps in the microwave for a few secondsto losen them up for an easy peel. But believe me you have to stand there, don't walk away
![[UNCUT] เก็บ "สจ.โต้ง" เอี่ยวมาเฟีย รู้ตัวคนบงการ ก่อนสั่งลั่นไก I คนดังนั่งเคลียร์ I 13 ธ.ค.67](http://i.ytimg.com/vi/o-J_p62D40w/mqdefault.jpg)
It’s 2022 and you just rocked my world! I have been watching video after video and they were all Stampin Up which I didn’t need. I was getting discouraged. Then I was researching Google which had expensive cling backing sheets - I got more discouraged. Then your video came up on my recommended list and this is what I needed! I have the glue on hand! I did see another video using Fun Foam to add the stamped image on back - add more Tack-It. Thank you so much for this!!!!
So happy you enjoyed, thank you!
thanks so much for your video. great work! I stamped my stamps on plain paper, then laminated the sheets. once I finished getting them done, I store them on those, that I keep in page protectors in a note book.
Jaclyn Vogler That is a great storage idea and a nice way to stay organized. I appreciate you watching!💕
will the stamp stick to the laminated image? I am new to stamping, but have picked up many wooden backed stamps & would like to convert to cling...
wylie jones yes, it should be fine on the laminate sheets. Just be careful about the amount of glue you use, should be a thin layer. Too much glue and its a mess. I recommend trying on a stamp you don't care for at first. Have fun!
Best one I have seen so far. So many want to add more foam on the back or leave the foam that is there. Doesn't seem to me that that would do much good when using a stamping tool. AND the others went on and on and on and some were not organized. Thanks so much for a great tutorial that wasn't forever long!!!
That made me smile, thank you.
Your welcome!!!
Great video...I know this is older lol. That Aleens is terrific! I know it seems a hassle, but I stamp the image on a thin piece of acetate or vellum, fussy it cut around the image then glue it to the back of the stamp and put the Aleens on top of the acetate...I use acetate sheets because they do not wear down or decompose from the Aleens . I don't mind the extra steps but I know it would not be worth it to many lol :)
Wonderful idea! I'm sure the extra step is worth it. Great to know the glue won't ruin the acetate or vellum.
I too am very visually impaired so your tip is priceless! I had given up crafting completely .
Love the way you explain your process. This was the easiest to understand video of all that I’ve watched. You have a relaxing way of speaking I really enjoyed your video. .
Thank you so much for sharing your knowledge I can’t wait to put it to use in my own stash I’ll finally be able to craft again and get my stamps in order thank you so much.
Boo Peep so happy you found this helpful. Thanks for watching.
Thank you so much for this video. All the other ones I have seen put a cushion on their cling stamps. I like this simple method soooo much better!!! I am so excited to try it!
Jan Eastwick wonderful! I'd love to hear how it works out for you.
Jan sorry im just seeing your other post. You but in an incredible amount of work on your stamps even down to the organization. Awesome!!!!
Thank you for your demonstration. I just bought Aleene's tack it and this was helpful.
That square thing to get the residual glue off is from Dollar Tree..in the craft section.
I love this lil thing!😀
A year late to the party but I really enjoyed your message and learned a lot! Respect
@wendyknoxleet Thank you for that lovely comment. Happy new year!
I just watched a previous video that was so confusing on how to do this. Your's was so simple, straightforward and not lengthy like the other one. You gave some excellent tips too! Thanks!
Laurie Udall I'm glad this was help ful for you. Thanks so much!
I agree. Very straightforward.
Hi! I commented earlier about your video and how simple your method looked. You replied and wanted to know how I did with doing my own stamps. Well I am done, all but my Christmas stamps! Yay! Nearly 200 stamps have been successfully unmounted and turned to cling stamps. It took me a while but your method worked and I am very grateful. Thanks so much for sharing!!!
Oh, and I have made binders and cataloged all my stamps so i know what and where they all are. Sooo much better than dumping them all into drawers never being able to find what I want. 😍
What do you store the actual unmounted stamps on? I have a bunch from a yard sale, and I have categorized them, and now I need to stick them on something and store. Do you find that you do not need the foam on the back of them? I have a piece of foam in my Tim Holtz stamping tool, (like the Misti) and I guess that will give it enough "spring."
I just found the Aleen's in my stash!! I bought it to do this, but the video I watched was so many steps and this and that. Well yours was so simple I'm going to start today! Thanks so much for your sharing of this great idea!!! ~Liz~
Elizabeth Kerckhoff awesome, I'd love to hear how it worked out for you. Have fun!
Hugh tip. I just learned that when u heat the wood stamp, u can peel the image off the block. How cool is that? Also, if the foam peels off with the rubber, you not just leave it on?
Really!? What a time saver. The foam didn't always come away from the block in one piece and if it did the adhesive on it gave me issues. Thanks for the tip, I'm definitely going to try that.
I agree that your video was the best one. Thanks for the tip about the gum eraser. That’s the only thing I really wasn’t usngnthat will help me. I love getting my rubber off completely! Great video!
Cheryl Scrivens I sooo appreciate that. Happy you liked it.
Well, I truly needed some help with some of the glue that just won't come off. In fact, I just worked on a few myself and now have a bunch I will use Tack It Over & Over (with my fingers BTW...easier) and then let sit overnight. Thanks again!
Cheryl Scrivens oh thats wonderful! Have fun with them!
Saving me money and time! Thank you!
Thank YOU for watching!
Perfect! In 2022 !!! Thank you so much!
I'm glad it was helpful.
Hello, I am watching this on Tuesday, September 25, 2018. I don’t particularly like GooGone, because the smell lingers to me. Just a suggestion, try Citra-Solv, it take off adhesive so well, smell great and the smell doesn’t linger. Love the video.
@evelyn pinkard thanks so much for that suggestion, im going to look for that product, i, too, don't care for the smell. Btw today is the last day for my mini cling stamp giveaway if you sub to my new website www.naysworld.com thanks for watching!
Just read your tutorial and it is great...easy to follow yet detailed. Are you still doing projects on the web?
Thank you. I should be putting out some new videos really soon and updating my website. However I do put new items in my Etsy Shop as often as I can. You can also find me on Instagram under @naysworld8 Thanks for watching.
Well done. I really needed this!
Great!, thank you! Happy holidays!
@@naysworld
And to you as well ❤️✝️
its a watercolor masking fluid remover...that thing you used to remove the glue : )
Great tutorial!
Glue Erasers ???
Loved your video!
Is there a place I can buy the blank wood block holder for stamps
Check with some of the popular stamp supply companies, I've seen them, just can't remember where.
Great tips!!!! Now off to get my Aleen's glue!
Thank you for this great idea.
Thank you!!
can you leave the foam on the back of the stamp? thanks for sharing this video. I would think you could repurpose the wooden block into a mixed media base also.
I don't know how the glue would interact with the foam. I'd try it, if it doesnt work you can always take the foam off. Thanks for visiting my channel.
@@naysworld i'll give it a try and let you know. just need to buy some of that glue. thanks for responding so quickly
Wonderful, thank you!
Would nail polish remover work to remove the glue?
Hi Diane, I’ve never tried it before, now I’m curious. Have you used it to remove glue from anything before?
@@naysworld Use it all the time. Even safe on myself for residual glue left over from EKG stickers (safe on skin).
@@dianeoneil9563 thanks for the tip!
I love that large stamp! where can i find it and what is it called?? please
Thank you. Its called Christmas Cottage (R214) by Stampendous.com however, i bought it from a stamp show.
Excellent advice thanks so much!
Thanks for subscribing!!
Thank you for sharing, good video.
Appreciate you watching, thank you!
Where did you get your stamping block from,I NEED THAT 😊😊
Tara Harris I got it from a stamp show, though I really like Tim Holtz stamping platform.
Great video! This is just what I needed! I have masses of stamps I need to remove from the wood. One thing I would suggest is instead of using the masking tape method you could just trim the rubber. I don't know if it's still the case but years ago when I was a Stampin' Up demo all of their stamps came unmounted and you had to trim the rubber before placing it on the block. I spent MANY an hour trimming stamps lol! Just be sure to use really sharp scissors. Blessings and thanks for the video 😉😉👍👍
Thank You 💐x
Love it. What is that tool, plz!
Sherlene Mats this one is called stampoholic, but my favorite is Tim Holtz stamping platform. The original one is called the Misty. Cant go wrong with any of them. thanks for watching.
Yep, I have the Tim Holtz stamping platform. I'm sorry, I meant the eraser thing you used. You couldn't remember what it was called at the time of the video.
Sherlene Mats Lol! Its a gum eraser works great.
Great tutorial
Thanks so much!
Why wouldn't you keep the foam part on?
Hi Vicki, It's just a personal preference. Sometimes not all of the foam comes off in one piece.
@@naysworld Thanks. I plan to use sticky backed fun foam
Oh, I think that's a perfect idea❤
I have put my wood-mounted rubber stamps in the microwave for a few secondsto losen them up for an easy peel. But believe me you have to stand there, don't walk away
Wouldn't it be easier to just index your stamp? (Add the image on the back)
Sherry Utah thats a good suggestion. I'll have to give it a try on my next one. Thanks for watching.
Thank you!
@leah Parrilla My pleasure!
Nice
It's called a glue eraser.
Thanks Charles!
I saw where 10 seconds in the microwave removed the stamp and foam easily. Then you don’t have replace the foam, either.
Wonderful, will have to give that a go, thanks.
That "tool" is an adhesive remover...ironic, no? :-)
😂😂 yes
I just trim the extra rubber off with a small pair of detail scissors.
Those gadgets are called rubber cement pickups.
Thanks Nancy!