sony HCD-GZR77D please wait eject standby problem || bypassing the fault ||

แชร์
ฝัง
  • เผยแพร่เมื่อ 18 พ.ย. 2024

ความคิดเห็น • 44

  • @amrindersingh5272
    @amrindersingh5272 9 หลายเดือนก่อน +1

    Very good work paaji …I like ur knowledge….good work …

    • @rajuradios
      @rajuradios  9 หลายเดือนก่อน

      thank you so much sir🙏🙏😌

  • @bamberboy2628
    @bamberboy2628 9 หลายเดือนก่อน +1

    ਸੇਮ ਪੌ੍ਬਲਮ ਪਰ ਮਾਡਲ ਹੋਰ ਆ ਟਕ ਟਕ ਦੀ ਅਵਾਜ ਆਦੀ ਫੇਰ ਔਨ ਨੀ ਹੰਦਾ ਕੀ ਹੱਲ ਹੋੳ ਜੀ

  • @vs2559
    @vs2559 2 ปีที่แล้ว +2

    Very good

  • @dr.gurpreetsinghrandhawa3345
    @dr.gurpreetsinghrandhawa3345 ปีที่แล้ว +1

    It can be repaired easily. Ribbon cable are easily available. Replace the transistor.

    • @rajuradios
      @rajuradios  ปีที่แล้ว

      yes sir ribbons are easily available…but, gear mechanism is tough to get, and that is main prob of this set. there is no way to bypass the pulse generated by sensor to turn off the set.

    • @premkxk
      @premkxk ปีที่แล้ว

      @@rajuradios Hi sir , by pulse u mean some DC voltage or what ,can we remove sensor and supply the required Voltage so that the system thinks tape is Ok , and doesn't give error ?

    • @rajuradios
      @rajuradios  ปีที่แล้ว +1

      no sir, actually it sense the rotation of wheel and as according to that sense it gives feed back to microcontroller and then the game begins and that sense is not in the form of voltage what we think.

    • @premkxk
      @premkxk ปีที่แล้ว

      @@rajuradios Good news , i found the TCM offline method key combination for my system GNZ88D /77D , i found it in service manual now the system works without shutting down , 👍,no need belt replacement , no mechanism replacement
      It seems The TCM offline method is there even for older models, needs to be checked in service manual and the key are different for every models

    • @rajuradios
      @rajuradios  ปีที่แล้ว +1

      @@premkxk yes but in case of majority of people even tcm do not work because of rare use of buttons and they do not work when we need

  • @metavize8046
    @metavize8046 ปีที่แล้ว

    Is there any way to disable tcm for gn1100d

  • @anismalik1221
    @anismalik1221 5 หลายเดือนก่อน

    Bhai g mere pass mhc-gzr8d model eject standby ho rha h bypass kaise hoga plzz reply

  • @kopulpremathilaka2245
    @kopulpremathilaka2245 ปีที่แล้ว

    Sir mhc-gzr77d setup power amp ic namber tell me sri lanka me

  • @anurasanjiwa-oh3wi
    @anurasanjiwa-oh3wi ปีที่แล้ว

    Sir sony model no HCD -GNZ55D stand by foblan tell me translate to english or sinhala

  • @ramgoud6012
    @ramgoud6012 11 หลายเดือนก่อน

    Same player hey mere pass
    How you bypass the cassette player mechanism

    • @rajuradios
      @rajuradios  11 หลายเดือนก่อน

      unable to bypass yet… do anything we can not bypass this.
      have to repair full mech.

  • @elisamijareschannel
    @elisamijareschannel ปีที่แล้ว

    same problem but different model. mch gh1300d

    • @rajuradios
      @rajuradios  ปีที่แล้ว

      simply unplug the cassette player jack and disconnect it from main board…it should fix.

    • @patelved9053
      @patelved9053 7 หลายเดือนก่อน

      How to know which one is it? I have same problem in my sony music system. Pajii pls respond

    • @rajuradios
      @rajuradios  7 หลายเดือนก่อน

      jab system open kroge tuo cassette player k just back side dkna jo jack milega usko follow krna kahan jaa raha hai bs usko nikaldo wahan se fr check kro

  • @metavize8046
    @metavize8046 ปีที่แล้ว

    Hi bro please find a way to fix this problem on sony gn1100d, i really need it❤

    • @rajuradios
      @rajuradios  ปีที่แล้ว +1

      it would be easy if you forget about CD and all stuff using just bluetooth on this will be good

    • @metavize8046
      @metavize8046 ปีที่แล้ว

      @@rajuradios exactly i just want use the aux. But its not working, it stuck on checking cassete and goes to eject and standby.
      What should i do?

    • @rajuradios
      @rajuradios  ปีที่แล้ว +1

      well try to change the belts of mechanism which is little tricky and you need mechanic to do this. try to change and check the working is okay. there is less chances you got problem in circuit its only mechanism fault and no way to bypass it….

    • @metavize8046
      @metavize8046 ปีที่แล้ว

      @Raju Radios the problem is the tape b mechanism that the head dont move correctly and i dont have access to parts, i want to know is there any way to disable cassette test?
      I have seen a video that show pressing 2 keys and turning on make tcm off and cassette fault will be bypassed

    • @rajuradios
      @rajuradios  ปีที่แล้ว +1

      @@metavize8046 doing bypass is not any way. but, by pressing the buttons you can do it. the thing is your buttons may also be faulty thats why you are not coming out of this problem.. just do one thing replace the 3buttons you need in this process then try it.

  • @daduldanzongpa6748
    @daduldanzongpa6748 ปีที่แล้ว

    Hlo I got this same model and same problem and now display is also gone

    • @rajuradios
      @rajuradios  ปีที่แล้ว

      basically try to change the belts of the mechanism of tape or try by removing its connection of tape.
      power off can be other fault which i can say about after diagnosing the machine.

    • @daduldanzongpa6748
      @daduldanzongpa6748 ปีที่แล้ว

      Can I get your contact number if you don't mind

  • @soubhiksvlog3912
    @soubhiksvlog3912 ปีที่แล้ว

    Where you from?
    Mera same problem!
    Currier available hai?
    Contact number...

    • @rajuradios
      @rajuradios  ปีที่แล้ว

      i ll try to fix this.. am from punjab barnala… courier is available… 9530770875

  • @mandasrinivasmurthy95
    @mandasrinivasmurthy95 ปีที่แล้ว

    Hai bro ur voice very low

    • @rajuradios
      @rajuradios  ปีที่แล้ว

      i ll try to be loud next time bro