Actually, I'm not very good at painting figures, so it's difficult to make a video of that process. In other words, I don't have the skills to show people. I'm at a loss as to what to do after receiving similar comments from many people. I might make one someday if I get the chance. I'm sorry that I couldn't meet your expectations. Thanks for your comment.🍺
Love your builds, subscribed and follower, can i correct 1 thing? Your post or rod behind the drive wheels is wrong . This is where track is taught and no sag appears unless the tank was backed up and parked. Great idea with vinyl tracks on remainder of track.
I don't know if it makes any difference, but the Nashorn uses a bigger gun than the Marder III so the round that the loader is holding may be too big for the gun breech of the Marder.
@@BrackJohn I don't think I would make such a video. I don't use any special items, and most of the paints I use are orthodox Tamiya products. I'm sorry but I don't think it will be an interesting video.😱
The camera settings are FullHD and F30P. The shutter speed is 60, the aperture is about F13, and the ISO is about 800-1000. I didn't do anything special. During work such as assembly, painting, and weathering, 3 lights are lit from directly above and from the left and right to brighten the entire scene. In the last image video of part 2 video, the room is darkened and only one light is used. After that, I use a reflector board to subtly reflect light, and create dramatic lighting with strong shadows and shadows. Did you find it helpful? Thanks for your comment.🍔👍
Have you considered turning the building and painting processes into ASMR? I really think it would be relaxing to just hear the subtle noises of the building and painting process without the music. Anyways great videos as always, keep it up!
Creating slack with wire is very clever. I would've never thought of that.
Hope it helps. Thank you for your comment.🍰
Keep up the specified tutorials! The slack tracks trick was very helpful!
I am glad to be of help. Thanks for your comment.🍰
Excellent! Can't wait to see the paintjob!
Part 2 will be posted in two weeks. Thank you for your comment.🍺
Amazing modelling👍👍
Thank you.🍎
マーダーⅢ格好いいですよね。
私もこの自走砲が好きでタミヤ、イタレリ、ドラゴンを作りました。
塗装編を楽しみにしています。
今回は雪の中で作戦実行中という設定で、雪のテクスチャーも使います。お楽しみに。コメントありがとう。🍰
Another great job on a older Tamiya kit, will look great after paint and weathering 👍
Thank you for your comment.🍺
Looking good! Like the use of the bush work and camo netting.
Thank you for your comment.🍰
Always a great build. Thanks for sharing
Thank you for your comment.🍰
O yes another build 👍. Looking forward seeing the end result. Just building a tamiya panther at the mo . With my own touch to it . 👍
Thank you for your comment.😄
Love the Build and the wire trick is neat. Well done sir
Thank you.👍
at 5:00 the putty/cement glue mix is a good idea, I will try it myself with revell putty and tamiya glue.
Thank you for your comment.🍺
Вы очень крутой моделист! Смотрю и учусь по вашим роликам.
Спасибо за ваш комментарий.🍰
Always a joy to watch your videos mate
Thank you.🍰
Great work as always
Thank you.🍺
Marder III H, my favorite version.
Thank you for your comment.🍎🍎🍎
I remember building these Toys as a kid, i loved them.
Oh really. Thanks for your comment.🍺
Watching this while making a 1:72 King tiger
I love your work :)
Thank you.🍰🍰🍰
Waiting for painting.Very well done 😃👍
Thank you for your comment. Part 2 will be posted on March 31st. Stay tuned.🍺
Amazing! I always find your work fantastic!
Thank you.🍺🍺🍺
お疲れ様です‼︎
今回の戦車の塗装大変そうですね笑😅、完成品を楽しみにしてます‼︎
ネットも枯れ木も着脱自在なのでそれほど大変ではないですよ。パート2の投稿は2週間後の3月31日です。お楽しみに。コメントありがとう。🍰
Come on, I can't live without part2 seriously😢
Part 2 will be posted today.🍺
@@smc-2 awsome,thx bro
Brilliant videos brother
Thank you.🍎
Your work is awesome 😀👍
Thank you.👍
My congratulations 👏🏼👏🏼👏🏼
Thank you.🍺
Awesome job as always !!!
I would love to see you paint and weather in interior of a German panzer tank
Unfortunately there is no interior this time, but there will be an opportunity like that someday. Thanks for your comment.🍺
Uhhh looking forward to that! The 7.5 cm KWK on a 38t Lafette :D
Part 2 will be posted in about two weeks. Look forward to this!!🍺
@@smc-2 I will sir 🍻
Beautiful build again! ☺️
Thank you.🍰🍰🍰
Another awesome build video. What size wire do you use to hold the track in place for the sag?
In this video, I am using a 0.4mm wire because it is a tank with a small body. A 0.6mm wire is used for large tanks. Thank you for your comment.🍺
@@smc-2 and thank you for responding to my question
Plz make a diorama for this model
I'm sorry, but I don't make dioramas. I am aiming to express the world view only on the tank body. Thanks for your comment.👍
お疲れ様でした。偽装の具合良いですね~。細かい所に拘るのもそれはそれで楽しいのですが、こういった作り方も楽しそうですね。
ベルト履帯を止めた真鍮線は黒く塗っていたのですね。ちょと考えれば判りそうな物ですが知りませんでした・・・嗚呼ハズカシイ (笑)。
私のような楽しみ方は本格的なマニヤの人から見れば「邪道」なのかもしれません。まあっ!でも!しかし!四角四面に考えすぎず、ある程度発想を自由に広げて創造し製作するのも、一つの楽しみ方の形かもしれません。いつもコメントありがとうございます。🍰
Nice👍
Thank you.🍰
Amazing work, also very motivating! Instantly subscribed :) Keep doing that awesome stuff :D
Thank you.🍺😄
отличная работа! Модели каких производителей, кроме Tamya вы используете для сборки?😊
В ближайшее время мы планируем построить советский танк не от Тамии, а от другого производителя. Следите за обновлениями.🍺
音楽も相まって、哀愁を感じる作品ですね!
今回も、参考になります!
使用しているドライフラワーは、どこの物ですか?
ご教授頂けると嬉しいです!
www.amazon.co.jp/TAKEDA-takeda-かすみ草-S-ホワイト/dp/B07BYKJJV1/ref=sr_1_44?keywords=かすみ草%2Bドライフラワー&qid=1679064682&sr=8-44&th=1
上記のものを使ってます。🍺
@@smc-2 さん
ありがとうございます!
早速購入して、使ってみようと思います!😃
🤝👍
🍺🍺🍺😄
Hey man will you ever do a figure painting video because I love the content
Actually, I'm not very good at painting figures, so it's difficult to make a video of that process. In other words, I don't have the skills to show people. I'm at a loss as to what to do after receiving similar comments from many people. I might make one someday if I get the chance. I'm sorry that I couldn't meet your expectations. Thanks for your comment.🍺
Check out Spruce and Brews here on you tube, he has some videos for figure painting!
Love your builds, subscribed and follower, can i correct 1 thing? Your post or rod behind the drive wheels is wrong . This is where track is taught and no sag appears unless the tank was backed up and parked. Great idea with vinyl tracks on remainder of track.
Thank you for your comment.🍮🥧🍪☕🫖
What kind of net is it you hang over the sides? I mean the product :) Grüße
It is gauze of the kitchen cloth used in the kitchen.🍺
@@smc-2 some call it cheese cloth
I don't know if it makes any difference, but the Nashorn uses a bigger gun than the Marder III so the round that the loader is holding may be too big for the gun breech of the Marder.
I am using the cannonballs that come with the Marder kit. Is there some kind of problem? I do not understand what it means.🍄🍄🍄
Ahh, okay. I thought you were using the ammunition for the Nashorn, which is too big for the Marder gun.
can you send a link to the duster kitchen cloth pls.
No links or anything. I bought it at the kitchen utensils section of a discount store in my neighborhood.🍺
@@smc-2 bruh then what is the name of the cloth i need the cloth to my tank
@@theodorefahlstrom4518 DUSTER KITCHEN CLOTH.👍
@@smc-2 Thanks
@@smc-2 i have a problem i didnt find it ._. can you help in anyway possible pls
Can make a video about Weathering and damaged effect to teach us ?
For now, I'm not thinking about making videos that only focus on weathering and damage.🍰
@@smc-2 can you make a video about items or what color you use pls?
@@BrackJohn I don't think I would make such a video. I don't use any special items, and most of the paints I use are orthodox Tamiya products. I'm sorry but I don't think it will be an interesting video.😱
@@smc-2 can you make some giveaway pls?
@@BrackJohn I'm sorry, but there are no plans for such a project.🍰
Really like to know your filming set up for your videos
The camera settings are FullHD and F30P. The shutter speed is 60, the aperture is about F13, and the ISO is about 800-1000. I didn't do anything special. During work such as assembly, painting, and weathering, 3 lights are lit from directly above and from the left and right to brighten the entire scene. In the last image video of part 2 video, the room is darkened and only one light is used. After that, I use a reflector board to subtly reflect light, and create dramatic lighting with strong shadows and shadows. Did you find it helpful? Thanks for your comment.🍔👍
@smc-2 thank you for taking the time, I'll try it.
Have you considered turning the building and painting processes into ASMR? I really think it would be relaxing to just hear the subtle noises of the building and painting process without the music. Anyways great videos as always, keep it up!
It might be interesting for me to collect my knowledge about ASMR and consider how I can use it effectively in my videos. Thank you for your comment.🍎
Where is the gunner 🥲
The two people in the fighting compartment are the Gunner Loader and the Commander.🍺
It is also said that the commander concurrently served as the gunner.🍰
Marder 2
???
@@smc-2 this tank is Marder 2
@@МихаилВойченко-н3у Nope Marder 3 early version. Marder 2 is on panzer 2 chassi thats a t38 chassi
1コメ
いつも楽しく見せてもらってます
楽しんでもらえてなにおゆりです。コメントありがとう。👍