Supra H&R Lowering Spring Install (EASY)

แชร์
ฝัง
  • เผยแพร่เมื่อ 26 ต.ค. 2024

ความคิดเห็น • 33

  • @CarPassionChannel
    @CarPassionChannel หลายเดือนก่อน

    What’s up man. I recently purchased a 2024 supra with a six speed. I’ll be buying as much stuff as I can from your site because not only do I believe in good karma, but I believe you are a genuine person that is trying to do good in the Car community. Keep rocking buddy.

  • @EsquivelChris1
    @EsquivelChris1 11 หลายเดือนก่อน +1

    Supra coming along nicely 🔥

  • @JaredSVX
    @JaredSVX 11 หลายเดือนก่อน +3

    Catching up on your videos and noticed Randall hasn't been in any of the recent videos...did something happen to him?

  • @jmanlevan
    @jmanlevan 11 หลายเดือนก่อน +3

    Cam! This came at the perfect time as I just got my H&R springs for my Supra. For the springs, do they have to go in upside down? Or can they go in right side up? You mentioned that everything fits with the spring upside down but looking at my springs, they seem to be identical no matter which side so not sure why you had to install them upside down? Noticed you installed the rears upside down too.

    • @phillyazn
      @phillyazn 8 หลายเดือนก่อน

      I just installed mine and the hr lettering was upside down. The bigger spiral goes on top and the smaller spiral on the bottom.

    • @brentyee5914
      @brentyee5914 8 หลายเดือนก่อน

      @@phillyaznmy fronts are “upside down” the letters too, the rears and “right side up” where you can read the letters normally.

  • @ParkerTheRapper
    @ParkerTheRapper 11 หลายเดือนก่อน

    Definitely makes me want to pick up a set of these up from my M240!

  • @andrewllll
    @andrewllll 11 หลายเดือนก่อน +1

    Liked to support! Would love to see a ride quality review video. Likely going to go this route with my m340

  • @miguel24gsi
    @miguel24gsi 11 หลายเดือนก่อน

    Next SPOILER 🥰

  • @DatGameCollector
    @DatGameCollector 11 หลายเดือนก่อน +1

    Brother you wanna preload anytime you do suspension work.

  • @kona6451
    @kona6451 5 หลายเดือนก่อน

    Any issues at all with using the factory bumpstops???? Can't decide If I should trim them to make up for the amount the car is lowered.

  • @bgarcia1738
    @bgarcia1738 11 หลายเดือนก่อน +1

    How much of a drop ?

  • @channelgreen5949
    @channelgreen5949 11 หลายเดือนก่อน +1

    Yo i have H&R installed too. Do me a favor when you drive around 50 mph, let go of steering wheel for couple seconds and check if car pulls to the right. Cause mine does even if i got it aligned after i installation. Thanks bro! Let me know

    • @KraddyFPS
      @KraddyFPS 8 หลายเดือนก่อน

      Mine does the same. Had 3 alignments and they all check out, yet it still pulls

    • @channelgreen5949
      @channelgreen5949 8 หลายเดือนก่อน

      what brand is yours? H&R? SWIFT? Made me thinking if i should switch to Swift springs. @@KraddyFPS

    • @KraddyFPS
      @KraddyFPS 8 หลายเดือนก่อน +1

      @@channelgreen5949 I have H&R as well. It’s really not too noticeable for me but it does glide right.
      I’m content with them and don’t wanna go through the install again so I’m keeping them on

  • @i3igpete
    @i3igpete 8 หลายเดือนก่อน

    7:24 where did you crank on the pry bar to twist the arm?

  • @OBYourThirst
    @OBYourThirst 11 หลายเดือนก่อน

    Did you change the bumpstop? I want to upgrade my springs and struts but I read always good to change bumpstop to shorter ones when lowering?

  • @4kstreamer44
    @4kstreamer44 4 หลายเดือนก่อน

    stock premium tires and wheels?

  • @_austind
    @_austind หลายเดือนก่อน

    Would’ve liked a slower, more detailed explanation of disconnecting lines.

  • @leftsock605
    @leftsock605 11 หลายเดือนก่อน

    Who did you take your inspiration from with carmaspeed?

    • @CameronAlford
      @CameronAlford  11 หลายเดือนก่อน

      What aspect of it?

  • @juancitomarin4935
    @juancitomarin4935 11 หลายเดือนก่อน

    Would you trade in the sti for the Supra If you can only have one? (I have fully built one, but I want a Supra)

  • @supramin-aaron
    @supramin-aaron 11 หลายเดือนก่อน

    It seems like you didn’t cut the bumpstops

  • @lowbeamzz
    @lowbeamzz 11 หลายเดือนก่อน

    In short the coilovers are like 3k to keep active dampers I see why you did it the k v3 kit is expensive we understand cam 😂

  • @Jeyelll
    @Jeyelll 9 หลายเดือนก่อน

    Wait how do I use that render 2 reality? I wanna spec my supra

  • @sphinxore4499
    @sphinxore4499 11 หลายเดือนก่อน +1

    Was thinking about doing springs on my 340, have you ever had any experience with springs blowing out the struts? That's what everyone seems to says will happen after like 20k miles. Cars coming together great.

    • @CameronAlford
      @CameronAlford  11 หลายเดือนก่อน +1

      Nahh theres no way. That person doesn’t understand how shocks work. It ain’t cuz the spring lol

    • @sphinxore4499
      @sphinxore4499 11 หลายเดือนก่อน

      @@CameronAlford appreciate it

    • @bynjei2530
      @bynjei2530 11 หลายเดือนก่อน +2

      I’ve run lowering springs on my 2015 Q60 (G37 Coupe) Sport and it was a 2in drop and had them from 50K miles to 97K miles. No issues. Ride was close to stock. People who blow struts are putting 3”+ drops on stock struts. I recommend doing lowering springs with upgraded shocks but you’ll be fine if you don’t upgrade them too and i daily my cars. Gonna do the same for my 2017 Mustang GT

  • @marcusmartinez3692
    @marcusmartinez3692 3 หลายเดือนก่อน

    Where is the difference look like the same as before 🤔🤔

  • @manuellopezej1
    @manuellopezej1 11 หลายเดือนก่อน

    The supra is cool but we want more EP3

  • @Yhyujss
    @Yhyujss 10 หลายเดือนก่อน

    Do you need to align your front wheel after installing new springs