ฝัง
- เผยแพร่เมื่อ 16 ก.ย. 2024
- URUAV Analogue Mod: bit.ly/2TkwqZt
Best DJI Deal: bit.ly/2kJPIZl
DJI Store: bit.ly/2lrmper
RDQ: bit.ly/2lnOnYt
GetFPV: bit.ly/2mWDflX
Pls note casings are for v1 board
They have since added a switch and changed
the shape by the looks of it:
Casing 1: bit.ly/2u01qDb
Casing 2: bit.ly/2FOMLO8
Casing 3: bit.ly/2HxUD7m
Iflight Kit: bit.ly/321Mulb
3d Printer: bit.ly/37BXFCj
Not got a 3d printer? bit.ly/2UZK2Kz bit.ly/38CUE5Q
All BG Coupons: bit.ly/2O6f5Pt
Analogue Gear:
HDO2: bit.ly/2ta7Yz4
Rapidfire: bit.ly/2EiMYrJ
TrueD V4: bit.ly/2P1pyNC
True-D LITE: bit.ly/37ChaL0
Menace Periscope: bit.ly/2NfHy8u
Menace pico: bit.ly/2sNGP1p
Mence bandicoot: bit.ly/2S81nzD
SMA Extender: bit.ly/2NczjKq
Support me:
Banggood: bit.ly/2RYYCjh
RDQ: bit.ly/2OveurT
GetFPV: bit.ly/3bd2Lrx
Amazon: amzn.to/2H6gti0
Patreon: / andyrcchannel
PayPal: andyrcchannel@gmail.com
![☀ Большой ТЕСТ антенн для DJI FPV видеосистемы [DJI FPV Antennas Test]](http://i.ytimg.com/vi/yNMMQkyqfRE/mqdefault.jpg)
![☀ Большой ТЕСТ антенн для DJI FPV видеосистемы [DJI FPV Antennas Test]](/img/tr.png)
URUAV Analogue Mod: bit.ly/2TkwqZt
Best DJI Deal: bit.ly/2kJPIZl
DJI Store: bit.ly/2lrmper
RDQ: bit.ly/2lnOnYt
GetFPV: bit.ly/2mWDflX
Casing 1: bit.ly/2u01qDb
Casing 2: bit.ly/2FOMLO8
Casing 3: bit.ly/2HxUD7m
Iflight Kit: bit.ly/321Mulb
3d Printer: bit.ly/37BXFCj
Not got a 3d printer? bit.ly/2UZK2Kz bit.ly/38CUE5Q
All BG Coupons: bit.ly/2O6f5Pt
Like#28
Oooo is that my rapidfire topplate design I see there for the URUAV ?
I think the DJI footage looks better in analog.
Its because the rapidfire
The DVR quality of the DJI goggles is amazing. Makes my attitude v3 goggles look like muddy shit.
Fantastic flying and comparison, Andy!!! 😃
Personally, even the shit FatShark's DVR recording is good enough for me! 😂
Anyway, you decide what you most like. 😃
Having both, myself and fly primarily fixed wing;.., It seems (imho) that in a analog comparison; the DJI gives a good deal of immersive'ness feeling compared to the HDO2's; I believe Mario even mentioned this also in one of his reviews. Both are good goggles, but I think the DJI's give a bit more of that "being there" feeling. That's the reason why I bought the DJI's, fwiw.
Powerplay all the way! I'm loving mine it looks great
I was wanting to get the dji but was worried about only using dji drones but not anymore. Thank you. Great video👍👍
after 4 years this video, Finally I can get it..
Man i love flying f.p.v. quads!!! Thanks for all the time you put into your content!!!!!
Great Flying!!!!
I used my rapid fire on the dji goggles but I didn’t like the screen quality when compared to my skyzone 03o’s so I stuck the uruav adapter on them and use the 03o’s for analog and dji for digital
Great technical review Andy...
Nice comparison. I'm about to start my DJI digital journey this spring, so definitely excited. Also, please give us your take on the Mobula6, would be cool to hear it / watch it :)
thanks I will, Cheers
High quality of course! I was just trying to match my Aomway DVR to my gopro for the 1st time today, I tried adjusting the speed like you did but i couldn't get it right. Much frustration haha, was watching it & the DVR skips a complete spin I do! I was like wtf! Andy I did a BT vs PH video, same day, same battery, i just soldered the BT2 on after a recharge. Hilarious difference.
Why would you want to put analogue on dji goggles? Personally I don’t have fpv goggles but I think if I were to get my first pair it would just be the digital dji screen
because not everyone thinks analogue is evil and still has its uses for 65mm tinywhoops and fast racing? its currently blowing 70mph winds where I live so the 65mm whoops are a lot of fun
I have two filming quads with air units, but my race quads will still use analog for a long time. DJI goggles with AV in gives me the best of both worlds, along with really good DVR
Am I seeing more latency on DJI? Image quality is better but would not trade-off for latency
Personally I think you should use the normal fatshark dvr , it gives a true picture of what most of us are seeing in our own dvr , but like I said this this is only my opinion . I enjoy watching your reviews so which ever works best for you . 👍
Andy you can adjust the FOV on the AV input lol. You have to go into the main menu and adjust the FOV like would for HD then go back into AV input.
I don't think I mentioned the fov? I think you are getting it mixed up with aspect ratio. The DJI screen resolution in 16:9 is 1440 by 810. But as there is no 16:9 option available for DJI analogue. There is a zoom option which is what I think you are illuding to but even when set to 100% the dji 4:3 resolution becomes 1080 by 810 where as the hdo2 is 1280 by 960 natively. So a higher resolution coupled with the oled screen makes for a better analogue experience with the fatsharks
@@AndyRCchannel yeah @ 5:57. "Shrinks the image down".
Yes I suppose shrinks the resolution rather than image would have been a better word But how you interpreted it is not what I meant. The joys of being a TH-camr.
Andy, I am so glad you mentioned that not all of us can afford to try or buy these goggles (but still interested in the development). I fly a lot indoors alone and have now multiple DVRs. I got the Eachine watch and the Skyzone Sky02 goggle's built in DVR and Eachine PowerDVR wired up to a FR632 diversity receiver. Not sure which one I should be using or should I go for the PowerPlay? It seems to me my Skyzone wins in my case.
check out my review of the power play here and see if its for you. Skyzones are a very good choice indeed. Cheers th-cam.com/video/6zalBdlbzic/w-d-xo.html
I was thinking about selling my HDO2 and getting the DJI Googles with the dogiadpter and using my rapidfire in that.
Does it work just as well in the dji googles?
I have the DJI goggles and the external URUAV analog adapter. For analog I have gone back to my old goggles simply because once I add the URUAV adapter, 3d printed holder, antennas etc it's just getting too bulky, heavy & awkward. Especially when I slide the goggles up and they keep sliding down. Ok with quads as you already have them on but launching a plane with that lot is a pain as it keeps sliding down over my eyes during launching.
You can upgrade to a better head strap and I think that would sort out your issues
@@AndyRCchannel Do you mean the DJI one that is never in stock or some other one?
You can use the thick fatshark or skyzone ones if you 3d print a bracket and they fit much better.
I like the way you do your videos Andy
Ahh but some of us are using the one of the most expensive box goggles we could find :) In my case, i want the massive FOV so high end Box Goggles are my only option
Good comparison video Andy.
"How does he know my uncle?"
Ive used fatshark rcv900 since 2011, i tried the ev100 goggles, they are good.
Definitely use the powerplay for reviews!
6:31 min - lol the balls on the roof
I think the wobbly DJI dvr comes from their sloppy deinterlacing. Reduce framerate to 30 and it's gone. Most visible in the OSD text. Still not sure if my dvr freezes are completely gone. Need to get a print of that sleek analog mod adapter you showed here! Greets, Mario
If you aren't using the uruav module then the system freezing up will be down to an interior regulator. No freez ups here after around 50 flights
@@AndyRCchannel I am using the URUav module with Clearview Goggles module. I also had this on the Clearview Groundstation connected via cable to the DJI goggles. Maybe it's a thing that only happens with the way Clearview handles the video.
Other guys found that noisy video (high bandwith demand) would need really high peak data writes onto the storage card - if this is to slow, it would freeze.
Then I tested my SD cards (to 65mbytes/sek) and dont think this should be the bottleneck...
Anyhows, have converted my current main copter to DJI fpv and will fly more digital from now on!
greets, Mario
@@Rcschim how are you powering the URUAV unit? im using ay high C rated lipo in my pocket due to the high current draw from the goggles. could be browning out? i also look at the top ranked micro sd cards when it comes to data transfer and only use those, so maybe that is a factor. But no issues here using rapidfire, TrueD V4, eachine achillies.
@@AndyRCchannel Powering it from a larger 4cell pack as well...
I have pretty good Samsung Cards (tested on PC with write Speeds of avg. 60mbytes/sec (~ 480mbit!)
But I came to the conclusion to buy exactly what DJI recommends (the Sandisk Extreme V30). Guess this will help...
thanks, br, Mario
Can anybody me delight me what is the point of having DJI Google's and using if for analog camera and Vtx feed in first place. I would rather exchange all the Vtx units on my quads then buy external DJI additions to convert the image.
A few reasons. Tiny whoops. And fpv didn't start with the dji models so lots of legacy models
AND price? An analog vtx you can get a decent one for like $25..... where a DJI unit is well over $100... that adds up when you have 20 different drones haha.
Top quality review Mr RC..
As for my preference I always like to see DVR from the pilots pov.. if it's lower quality so be it.. I want to see it as it was seen, hope that makes sense.. keep up the excellent work in this challenging weather.. 👍
@Dave Well all DVR will record the same POV... It's frame dropping that will be different.
What was the result in distance test of the dji analog adapter?
Nice video Andy!
Great info! BTW, you may already know this but next time you fly that sports hall try taking the antennas off of your module and running with no antennas. Sounds crazy but it actually works for indoor environments with a lot of multi-pathing like whoop races and so forth.
I've never flown fpv but the DJI looks much better to me. Less glitchy I'd say. While the HDO2 seems to have a lot more flickery which may be quite distracting.
So I'm putting one of these on my skyzone03o, do I still need antenna attached to the goggles themselves or just move my antennas to the module?
And bobs your uncle 😂 🤣
would be awesome to see your opinion on the mobula6! I'm torn between it and the tinyhawk 2 because I read somewhere that someone had failsafe problems on d16 with the tinyhawk 2 and my transmitter doesn't support d8. I really want a quad to fly around the outside of my house, from the front and back yard, but also small enough i can fly inside. If you have any recommendations that would be great!
Thanks for always making awesome videos Andy!
You will get drop outs on both mobula6 and tiny hawk so it's best to buy a d8 module for your tx
Hi Andy I asked you about a week ago what battery is best for the mantis 85 a have lost the comment and would love to buy and best place to get them thanks in advance 👌👌👌🎮🚁
Cool find on the 59.9 vs 60 fps. I personally think its better to record too much then to drop frames like the fatshrk DVR. That way the editing later can fix it. However this is a simple fix that DJI could put into a future update to give tru 59.9fps
This is the thing. DJI can seem to fix stuff like this remotely without any hardware change
@@AndyRCchannel Yes DJI has made a system that can be easily updated like a iPhone. They just need to be made aware this is something they need to add.
Yes mate do the mobula 6 been a while since ive seen you do a 1s whoop. i have a snapper 6 which is proving to be a great whoop. but also have a mobula7 which i have loved and modded to bits. if anything taken its charm away abit. its now a 3s light weight monster that i cant fly indoors now😉
i have 50bucks teleporter v4 :) enough for me. you cant miss what u dont know
Hi.... How i resize analog image in full screen in the google dji?
Absolutely love your Channel! Especially like your music videos you're extremely talented. My question is what pids are on your mobula6. I just got mine yesterday from banggood, and it has a serious case of Jell-O. Camera is securely attached and not vibrating. But there are different PID Profiles In betaflight which one are you using? Thank you once again! Happy flying!
I'm using stock pids. The jello isn't cause by a bad tune it's cause by flying in sunny conditions or bright lighting and the way the camera is mounted
@@AndyRCchannel is that profile one or profile 2? This thing really has a case of the shakes and chimis
@@alembicfodera I assume profile one but which ever one it came set to out of the box.
Hey,
since you were talking about the screen bobble issue with the trueD....I'm having that exact issue with my Rapid-fire on the HDO2... The screen is bobbling/jittering/flickering...though that appears to happen no matter if I'm using pal or ntsc....any thoughts on that? Do you get that too?
Nice video btw... Keep it up!
I think the higher resolution screens of the HDO2s slightly does that regardless of the module. Its not something I can notice unless you get a magnifying glass on the pixel. If you can see is like in this fottage then i would RMA it.
@@AndyRCchannel no for me it actually is quite a significant jitter...i can ignore it while flying but it's definitely noticeable without a magnifying glass^^
Also I already had my screen driver boards replaced because of that....made No difference
Can't the DJI screen's contrast/brightness/gamma be turned up to look similar to the OLED screen?
sort of but the oled always wins
Hey @AndyRC - A few thoughts for you and your viewers:
1.) If you look at the video files recorded, the Mbps on DJI is much higher than 20. I've seen as high as 82 Mbps!
2.) There is a new V2 of the URUAV adapter which has solder pads and a power switch now.
3.) The best "side mount" URUAV 3d case right now is the new V2 from www.themakerboyz.com - the fit / finish / engineering into it is OUTSTANDING. I could not get over how well thought out it is, and how excellent the fit / finish is. There is a "quick release" style baseplate as well to easily remove the mod when not in use!
Iv done probably 50 analogue flights now and its only ever recorded 20mbit both pal and NTSC, Mine says its the V2 and there is no switch. But I see they have added a switch and not changed the pictures.
Nice job Andy...your hard work is always appreciated and why I am one of your Patreon supporters.
thanks for the support it is really needed in these difficult times our hobby is facing from all angles.
@@AndyRCchannel Yep agree Andy.... we may all be in the FPV UNDERGROUND soon here in the USA..... So if you swing by, please use the "I am not the FAA" super secret knock.
Hey Andy, I purchased the DJI goggles + module adapter + eachine pro 58 VTX. Do I need something 3d printed to keep it in place? You briefly mentioned it in your video
You don't need to but it will keep it in place better
@@AndyRCchannel is there a version for the eachine pro 58 that you know of?
The pro58 will fit the module but as for the 3d printed part it's supposed to fit all. But I can't guarantee it. Some people seem to have more luck than others
The uruav board is just to power your module and give me the av output, right? So in theory I can stick them also on my fatshark attitude v2s to use a rapid fire module without modding the goggles or buying new ones.
u can but i would guess that the skyzone addon module would be a better fit
@@AndyRCchannel haven't really gotten into modules but I'll have a look at the sky zone thanks for the tip
longrange comparison please ...:)
lotsa good info as usual.
thanks for watching
Watch that Furious Smart Case, the main discharge lead on mine broke inside right next to the rubber grommet that the wires pass through because of the angle it sits at when it's plugged in.
Thankfully my goggles powered down after I landed and stuck them up on my head rather than when I was flying, would have probably lost my quad if they cut off during flight.
I don't leave it plugged in so there's not any stress on it while it's stored. Another reason power buttons are useless
@@AndyRCchannel me neither, mine always had a weird bend when plugged in though, and probably also caused stress on the wires from the way I pack it into my case as well.
I've got it all in bits I just need to find an old adapter with a barrel jack that I can chop off and use to fix it up.
The power switch position on the HDO2 is so annoying, every time I lift them off my head I end up holding that button, I don't like the idea of power switches neither.
Hey Andy- sorry for the question but I’m looking for a good starter box goggle. I’m getting my wife’s bosses 10 year old son in to fpv and not sure what to recommend? What about the Eachine EV 800D? Thanks for any help you can give me! Cheers
yes thats a good starter goggle or the ev800dms (my preference)
Thanks so much for the help Andy. I see the Eachine EV 800DM but not DMS. Are they the same? Thanks
@@stewarthanson2931 check out mr reviews of both for the differences.
is there so much difference between the two screens?
I would like to hear your take on the mobulas6 given you have done a lot of other whoops
nice mod to DJI goggles but seems difficult to use ground station in a race anymore
To which voltage do you fly your Mobula 6?
What about the long range between HDO2's and DJI Analog? Which one would be better?
Depends what module and antennas you use the goggles make no difference
@@AndyRCchannel if same module like rapidfire and same antennas on both the HDO2 and DJI Analog then... ..
Nice! You've made an antenna test for DJI HD, a few new antennas came out meanwhile, what is in your opinion on the best antenna setup, shall it be 1.) for freestyle and 2.) for Long Range?
Which new antennas are you referring to? cheers
@@AndyRCchannel Cyclops V2, mainly, didn't find a lot of range tests about them.
For long range for instance, do you know wether the Cyclops V2, the combo of X2-Air or even the O.R.T shields are the best (price not being a factor) are the best?
And for freestyle, wether the axII 2 from Lumenier, the TrueRC singularities or Stock DJIs are the best?
@@spanthyx It sounds like you didnt see my antenna video? th-cam.com/video/HS0gpB8ljzQ/w-d-xo.html from my testing. The DJI system always gives different results. I use stock antennas on the top and menace antennas at the bottom and thats a good all round setup for me. I struggle to buy into any antenna because at the end of the day DJI has not told anyone how the DSP works, so I feel like people are being exploited by these very expensive re purposed analogue antennas that give very little gains. As for long range, regardless of the antenna. The two way communication system uses packet timing to cut you off at 4km regardless of the antenna, so id sat save your money.
@@AndyRCchannel Well ty for the quick and long answer, I'll watch it again!
DJI is still stuck in 4:3 in analog with a 16:9 screen. Why?
Because it's not their priority and personally I wouldn't use 16:9 but it's something they will add for sure
Is this a dji v1
Why TF did you put different modules in them to compare these
Please review mobula 6.
Can the module receive audio?
Sir just got into fpv around Xmas got the tiny hawk all in one fpv kit my questions are what radio would be a good upgrade would bind with the tiny hawk as the included radio is hard for me to handle too small for my hands and also what would be the next fpv step up for me after the tiny hawk I have beaten the heck out of this thing still can't loop or roll haven't figured that out keep crashing I also don't have a computer for programming so I have no clue about beta flight need to learn I do have a tablet any help would.be appreciated as this is extremely fun for.me but also confusing as heck I just want to be able to just buy a mini quad and be able to bind it to the radio quickly and go fly so I don't.have to have multiple systems have to be budget minded thank you.sir for your time and expertise
what bundle did you get? if you are looking for a upgrade, taranis qx7, if it is a frsky receiver in the tiny hawk. this is coming from a guy with pretty huge hands
@@twistedttea I got tiny hawk bundle goggles mini quad and game style controller I have no idea what kind of reciever it has its not the tiny hawk s or two it's the bundle that was $165.00 came with one battery I bought 6 extra will that radio bind to it ready to fly thanks for the info
Nice review thank u
Put Jesc on your mobula6 and get more control and flight time!👍
More info plz I have dji mavic air 2
What i all need buddy
whats the fov in analog on dji goggles.
Hey... why u say nothing about the latancy? are they equal?? .. greetings?
yup
@@AndyRCchannel Thank you for your answer, and for your cool videos :*
yes! make a little review for the mobula 6, please! i am always whaiting your reviews before i put money on a thing. thank's for yours vidéos ;)
How about latency between these two?
Can I set the horizon with goggles dji?
Hey Andy, for us poor people without a 3D printer have you got any idea were we can buy the bracket thing for the URUAV module? Great comparison thanks man :)
Iv put a link in the description to some 3d printing services. I got a quote of about 15gbp for the rapidfire version. Cheers
Cheers mate LEGEND :)
@@stevega1000 be careful though it looks like URUAV have changed the design and not the pictures so it might not fit the current 3d prints. only get them printed if you have the module shown in this video. they have since added a switch and changed its shape, annoyingly
Thanks for the advice I also read something similar on one of the designs that mentioned V1 V2 which was all a bit confusing hahahaI ordered one anyway cost 13 quid and comes in 7-8 days BOOM 👍. Thanks again for your help and especially thanks for all the useful info you fire out way 😎
DJI/analogue mode...like sticking a model A engine into a Corvette.
I found in my uruav mod with rapid fire, when you switch channels or do something with rapidfire modes, I’m getting DJI initial logo screen. Looks like it loosing connection with mod. Did smbd has such issue?
I'm not getting this. How are you powering the goggles?
AndyRC 4s bat
What capacity and c rating does the lipo have? Have you printed off a casing so that the module doesn't move when you change the channel?
AndyRC 1500. 70c. And finally this mod killed my rapid ( Looks like shortcut. But pins are ok. 5v.
@@ivanlikhachev788 if you dont 3d print the casing and the unit is moving about I can see it damaging any module. sorry to hear that your rapidfire broke
Can you test them both at the edge of reception. DJI has issues with image blackout vs hdo2-s?
image blackout is coming from the people modding them manually rather than using the URUAV board. especially if you are using rapid fire. I believe manually modding the system requires adding a bec into the circuit and if its not rated for enough current then it will brown out not black out. It just so happens that the rapidfire module draws more juice when its trying to give you a picture through static.
@@AndyRCchannel Hmm, i guess i have to get the uruav board to test this assumption. It is useful as a stand alone ground station anyway.
The analog blackout is from using PAL cameras.
@@Furadi hello, is this confirmed by any means that PAL cameras are the issue with DJI analog Blackouts ? thx.
@@AndyRCchannel the iflight mod have its own BEC board supplied with the Kit, it's not the BEC
Again, nice work Andy, although I'm somebody who most likely won't be able to afford either set up any time soon. One thing I could afford is the Mobula6, and your opinion on it would be great! 😁
thanks ill work on that in the coming days
DJI is beating Fatshark in its own game. Even in analog the DJI goggle looks better.
thank's
dji for win..
easy first
edit: you have kind of a unique view, so another mobula 6 review would not be a dublicate.
thanks. It shall be done :)
Yes mobula 6
You can now buy this which is a little nicer than the 3D printed one. www.racedayquads.com/products/skyzone-module-adapter
I was meant to be sent one of those but they never did. I believe it just uses Velcro? the URUAV does an awesome job at regulating the power but yes a good option for skyzone users for sure
@@AndyRCchannel yeah I was one of the first to get it from rdq when they receive them, it does use Velcro. Banggood was supposed to get them but I haven't seen them on their site yet.