I pulled my new 7610 out of the box Friday to use it for ARRL Field Day 2021, instead of using my TS-940S. I was absolutely blown away by the performance of this receiver. Going from Kenwood to Icom and superhet to SDR was a challenge, but watching this video before the contest helped me tremendously. Thanks.
Ray, Tommy, and George; Thanks for this video. It really is worth the time to sit back and watch. I bought IC-7610 at Hamvention 2019. I only work CW and was pretty disappointed to see my brand new rig had such a narrow CW bandwidth. 1.2 khz sounds terribly pinched up and the manual led me to think that was the maximum CW bandwidth. Googling around led me here. At around 26 minutes you began talking about adjusting the filter and the light came on! I can set my Filter 1 to be up to 3.6 khz if I desire. An OMG moment!! I now have it set to 2.4 khz and filter 2 is set to 1.2 khz. Not sure what I'll need in a contest but for every day use Filter 1 is set at 2.4 khz. Sounds great to me and I can quit thinking about trading for a Flex or something else. Your time invested in this video is greatly appreciated. It really helped me out! 73
This was a very informative review. Nice to have someone like Ray who is knowledgeable with the rig explaining the features. It was nice to see a review that went into depth rather than a 5-10 minute superficial you tube review by a user.
Thanks to Ray, Tommy and George. That was a most informative and enjoyable video. I could have watched this for much longer and will more than likely watch it again. Takes me back years ago on learning the ins and outs of the Racal RA17 reciever for my job at that time.
I enjoyed this 'review'. Its great to see two users being advised by the ICOM specialist. Makes me feel better about my own lack of knowledge regarding the 7610! Thanks Guys!! 73
I'd be interested to know why the 7610 seems to be unusable with AGC off.... unlike the 7300 which seems to be fine with AGC off. This anomaly compromises FT8 operation somewhat on the IC-7610. I wonder whether it is a fault in the design or set-up procedure of the 7610; seems to me that that the gain- distribution is wrong somewhere...
Guys, I owned a Yaesu FTDX-101d radio for 1 1/2 years and even though it has a great receiver, I was never 100% happy with it for several reasons. When you spend $3400 for a HF radio, you should be has happy as you can be! So, I sold it at the end of June 2022 (for a very good price since all used gear is higher these days) I immediately ordered an IC-7610 on July 3rd. HRO was out of stock and I had to wait (in purgatory as I called it!) two months for Icom to restock! I AM 100% happy with my IC-7610 HF radio!
@@clipperprospecting8445 No, I am happy with the 7610! Made a typo and did not mean to say 'not'. I like the performance of the FTDX-101and it is a great design cosmetically but, the Icom has features that I prefer over 101. I could list them but, not not want to get into a debate with anyone that disagrees.
It was sad to hear Ray say there are no plans to support external touch screen displays. I love having the RC-28 on the right; the radio on the left facing East, and monitors facing South in front of me working digital. If I could only have a 10 inch external touch screen display; that would be sweet. Love this upgrade from the 7300. Thanks guys!
Re the IC-7600: I think Ray is incorrect to say that the tuning-range, of the sub-receiver, is limited by the roofing filter; the roofing filters are in the IF, not the RF front-end. The sub RX is limited by the wide RF filters in the front-end; depending on which band you are on, sometimes i think these filters cover two adjacent ham bands....
How loud is the T/R relay on the Icom 7610 radio? I used to use a Kenwood TS-940 using AMTOR ARQ and full break-in CW decades ago. The T/R relay is very quiet in the Kenwood TS-940. I have also used a Kenwood TS-430, and the T/R relay is very loud, so using AMTOR ARQ and full break in CW would not be acceptable with the loud T/R relay. How loud is the T/R relay in the Icom 7610 radio?
To Ray, George and Tommy - What a great review of the 7610! Thanks so much for producing this TH-cam. I have a 7610 and of course I'm very impressed with its performance. However, I have one question you might be able to answer for me. On the filter button (next to APF/TPF) - I noticed there appears to be light on this button but I have yet to see it illuminate. Is there a feature that turns this light on? Haven't found any mention in the documentation nor your review. I hope I haven't missed anything obvious. 73 - Mike KM6KWG
Connie - FYI, just in case you did not see the reply to my question: "Some WiFi Range Extenders also have Ethernet ports on them. The Netgear EX6200 will do this.” I bought the Netgear (about $60+/-) at BestBuy, set it up in my shack, works like a charm! Hope this helps.
Remote operation from any place in the world? Not quite that easy, it does not have a built in VPN which you need. Flex has that feature built in and the best remote feature of any radio out there.
One quick question, if I may. Will the LAN port on the rear of the radio accept a wireless remote device so I do not have to hardwire my WiFi network to the radio? My WiFi router is light years away from my shack. All my other devices work fine in the shack wirelessly. I shudder to think of how long my LAN cable will have to be and how many walls I will have to route through to get a hard cable to the radio.
Looking for manufacturers to make radios that link via blue tooth to your smart phone and all the radios controls can be accessed from your phone as well as rx and tx.
You should have given it 200+watts. It's a shame that a nice radio like this will only do 100 watts. How come Kenwood is the only mfr that makes a 200 watt radio for under $3000
Hello! I'm very happy with my Icom IC-7610, I sold my IC7300 but ... I realized that in the IC-7610 they didn't add SWR control like the one IC-7300 has, then the operating frequency limit is lower to the IC-7300 Which reaches up to 70,000 MHz. Y?
This video is not a review. It is an information video that shows the features of the IC-7610 with the assistance of an ICOM rep. As such I would suggest changing the title, as it is misleading.
Because the 7610 ISN'T two 7300s in one box. The 7300 uses a 12 bit processor on TX and a 14 bit on receive while the 7610 uses a 14 and 16 bit respectively. The 7610 also has a digi-select on 160, 80 and 40M...the 7300 does not. They may be similar but the 7610's specifications are better.
Good riddance, Icom. I cancelled my order for a new 7610 when I found out you no longer produce radios with an RF gain. Adding a variable attenuator which *DOES NOT FUNCTION SIMILARLY TO A TRUE RF GAIN* is disingenuous and blatant misrepresentation. - Though I have always been an icom man, you have lost me and instead I just bought a Yaesu FTdx-5000 which *_DOES_* have a true RF gain. So long
I met Ray at Pacificon in Ca. several years ago. I was excited to meet him since I’m a huge fan of Icom. I have to say he was a total DICK to me. Tried to engage him in a conversation and he blew me off. Shame on Icom. Not a good ambassador for the brand.
Just another useless touchscreen radio from a calm because they think a radio is the cell phone it appears. I can’t wait to those touchscreen start failing to see how ICOM explains it.
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
I pulled my new 7610 out of the box Friday to use it for ARRL Field Day 2021, instead of using my TS-940S. I was absolutely blown away by the performance of this receiver. Going from Kenwood to Icom and superhet to SDR was a challenge, but watching this video before the contest helped me tremendously. Thanks.
Ray, Tommy, and George; Thanks for this video. It really is worth the time to sit back and watch. I bought IC-7610 at Hamvention 2019. I only work CW and was pretty disappointed to see my brand new rig had such a narrow CW bandwidth. 1.2 khz sounds terribly pinched up and the manual led me to think that was the maximum CW bandwidth. Googling around led me here. At around 26 minutes you began talking about adjusting the filter and the light came on! I can set my Filter 1 to be up to 3.6 khz if I desire. An OMG moment!! I now have it set to 2.4 khz and filter 2 is set to 1.2 khz. Not sure what I'll need in a contest but for every day use Filter 1 is set at 2.4 khz. Sounds great to me and I can quit thinking about trading for a Flex or something else. Your time invested in this video is greatly appreciated. It really helped me out! 73
25:37
This was a very informative review. Nice to have someone like Ray who is knowledgeable with the rig explaining the features. It was nice to see a review that went into depth rather than a 5-10 minute superficial you tube review by a user.
Thanks to Ray, Tommy and George. That was a most informative and enjoyable video. I could have watched this for much longer and will more than likely watch it again. Takes me back years ago on learning the ins and outs of the Racal RA17 reciever for my job at that time.
I enjoyed this 'review'. Its great to see two users being advised by the ICOM specialist. Makes me feel better about my own lack of knowledge regarding the 7610! Thanks Guys!! 73
Thanks for the great video, I just ordered a new 7610 yesterday and it is supposed to be here tomorrow ! Looking forward to getting it going.
I always enjoy these reviews with ray George and tommy.. best reviews on TH-cam.. thank you boys..
Ray, George and Tommy, this was a GREAT introduction to the IC-7610!! Thank you!
I'd be interested to know why the 7610 seems to be unusable with AGC off.... unlike the 7300 which seems to be fine with AGC off. This anomaly compromises FT8 operation somewhat on the IC-7610. I wonder whether it is a fault in the design or set-up procedure of the 7610; seems to me that that the gain- distribution is wrong somewhere...
Guys, I owned a Yaesu FTDX-101d radio for 1 1/2 years and even though it has a great receiver, I was never 100% happy with it for several reasons. When you spend $3400 for a HF radio, you should be has happy as you can be! So, I sold it at the end of June 2022 (for a very good price since all used gear is higher these days) I immediately ordered an IC-7610 on July 3rd. HRO was out of stock and I had to wait (in purgatory as I called it!) two months for Icom to restock! I AM 100% happy with my IC-7610 HF radio!
So Gary , Are you saying that you don’t like IC 7610 either …. Just wondering..
@@clipperprospecting8445 No, I am happy with the 7610! Made a typo and did not mean to say 'not'. I like the performance of the FTDX-101and it is a great design cosmetically but, the Icom has features that I prefer over 101. I could list them but, not not want to get into a debate with anyone that disagrees.
@@garylucas6511 Thank you , Have a great day 👍
Excellent hands on review of the new IC-7610. Really helpful. Thanks.
Nice review. Thanks Ray, Tommy and George !
Had a blast doing the video!
U
Oh why did I watch this! Now I want one REALLY BAD and my radio fund is $2,000 short of getting it!
It was sad to hear Ray say there are no plans to support external touch screen displays. I love having the RC-28 on the right; the radio on the left facing East, and monitors facing South in front of me working digital. If I could only have a 10 inch external touch screen display; that would be sweet. Love this upgrade from the 7300. Thanks guys!
Re the IC-7600: I think Ray is incorrect to say that the tuning-range, of the sub-receiver, is limited by the roofing filter; the roofing filters are in the IF, not the RF front-end. The sub RX is limited by the wide RF filters in the front-end; depending on which band you are on, sometimes i think these filters cover two adjacent ham bands....
Nice to meet you at Quartzfeast Ray you defiantly have the nicest Motorhome and anntenna set up very impressive.
Great review as always..George ray and tommy..👍👍👍👍
hard to believe that this was 6 years ago.
I’m buying two of them, instead of one 7851 and still have a lot left over.
Would be super cool if a software update was available to where the radio would decode morse code and FT8 and show it on the display.
How loud is the T/R relay on the Icom 7610 radio? I used to use a Kenwood TS-940 using AMTOR ARQ and full break-in CW decades ago. The T/R relay is very quiet in the Kenwood TS-940. I have also used a Kenwood TS-430, and the T/R relay is very loud, so using AMTOR ARQ and full break in CW would not be acceptable with the loud T/R relay. How loud is the T/R relay in the Icom 7610 radio?
Is the ALC input connection compatible with the IC-2KL ALC output voltage range ( -ve 0 to -10vdc ) ?
Can you transmit on the 45meter band too?
Question is, the IC-7700 better then the IC-7610? Some still like the 7700 better from what I hear.
great overview - 73 de HB9GNK
Did they ever fix the frying, blowing up screen problems?
To Ray, George and Tommy - What a great review of the 7610! Thanks so much for producing this TH-cam. I have a 7610 and of course I'm very impressed with its performance. However, I have one question you might be able to answer for me.
On the filter button (next to APF/TPF) - I noticed there appears to be light on this button but I have yet to see it illuminate. Is there a feature that turns this light on? Haven't found any mention in the documentation nor your review. I hope I haven't missed anything obvious.
73 - Mike KM6KWG
You lil dude's are just so precious. 😎
I am looking at the 14 MHz display there are 2 strait lines on the display what's up with that ?
...." it was on our show ...you should watch it some time ..." ....LOL great dig
How can i set the scope on the 7600 to look like this ? I only have the "spike style" and this looks much cleaner ! 73 la5vsa
One great video, thanks Gentlemen! A 7610 will soon join my 7300. Talk about the best of all worlds :)
What's a good DX antenna setup to use with this radio?
A 19-element quad at 400 ft fed with six-inch diameter copper tubing and silver center conductor.
why are the peeks in the spectrum scope so small ?
I'm with Bob KK6YLW, is there a wireless remote connection possibility?
Connie - FYI, just in case you did not see the reply to my question: "Some WiFi Range Extenders also have Ethernet ports on them. The Netgear EX6200 will do this.” I bought the Netgear (about $60+/-) at BestBuy, set it up in my shack, works like a charm! Hope this helps.
Remote operation from any place in the world? Not quite that easy, it does not have a built in VPN which you need. Flex has that feature built in and the best remote feature of any radio out there.
cool, very good review !
One quick question, if I may. Will the LAN port on the rear of the radio accept a wireless remote device so I do not have to hardwire my WiFi network to the radio? My WiFi router is light years away from my shack. All my other devices work fine in the shack wirelessly. I shudder to think of how long my LAN cable will have to be and how many walls I will have to route through to get a hard cable to the radio.
Some WiFi Range Extenders also have Ethernet ports on them. The Netgear EX6200 will do this.
Looking for manufacturers to make radios that link via blue tooth to your smart phone and all the radios controls can be accessed from your phone as well as rx and tx.
Mine is coming tomorrow.
You should have given it 200+watts. It's a shame that a nice radio like this will only do 100 watts. How come Kenwood is the only mfr that makes a 200 watt radio for under $3000
Hello! I'm very happy with my Icom IC-7610, I sold my IC7300 but ... I realized that in the IC-7610 they didn't add SWR control like the one IC-7300 has, then the operating frequency limit is lower to the IC-7300 Which reaches up to 70,000 MHz. Y?
What is the mod to open up the 70,000 MHz band?
the cw filter is so tight you put a lump of coal in it and you will get a diamond.
I don't see much sim-You-larity George !
neat radio. will be a lllllllooooonnnnnnggggg time till I get one lol
Nice Rig. :)
So big TRX ,but with no vhf & uhf band. 😢😢😢😢
This video is not a review. It is an information video that shows the features of the IC-7610 with the assistance of an ICOM rep. As such I would suggest changing the title, as it is misleading.
Why not just buy two ic 7300's and save a lot of money.
Because the 7610 ISN'T two 7300s in one box. The 7300 uses a 12 bit processor on TX and a 14 bit on receive while the 7610 uses a 14 and 16 bit respectively. The 7610 also has a digi-select on 160, 80 and 40M...the 7300 does not. They may be similar but the 7610's specifications are better.
Good riddance, Icom. I cancelled my order for a new 7610 when I found out you no longer produce radios with an RF gain. Adding a variable attenuator which *DOES NOT FUNCTION SIMILARLY TO A TRUE RF GAIN* is disingenuous and blatant misrepresentation.
- Though I have always been an icom man, you have lost me and instead I just bought a Yaesu FTdx-5000 which *_DOES_* have a true RF gain.
So long
Hi, interesting comment; what is it about the RF gain on the FTdx-5000 which is better?
👍
❤😮 20:35
GOSTEI PW8BR JI PARANA RONDÔNIA NORTE DO BRASIL 73
I met Ray at Pacificon in Ca. several years ago. I was excited to meet him since I’m a huge fan of Icom. I have to say he was a total DICK to me. Tried to engage him in a conversation and he blew me off. Shame on Icom. Not a good ambassador for the brand.
Nothing. Must have been having a bad day.
Nice radio shame about the leming that call's a QSO a Q ..FFS
Just another useless touchscreen radio from a calm because they think a radio is the cell phone it appears. I can’t wait to those touchscreen start failing to see how ICOM explains it.