Was on a call at large facility for a R.T.U. problem. Every time I went up/down ladder I took some trash down with me. Maintenance guy checked how it was going and saw all used parts by my ladder. He thought I changed all those parts, but was pissed when he learned it was just trash left behind. Did work there for 10 years exclusively because I took pride in my work, wasn't like other lazy techs.
@@ernestrollins383 That's why you show them what you take up and what you bring back down...then they know you did in fact do the replacements AND cleaned up after yourself... Unlike the other slobs working up there...
I feel like it's 50/50 at projects. Sometimes I clean up and sometimes I don't. There are some jobsites I like to hide semi broken stuff in equipment in case I need to come back for quick repairs. But I generally hide everything in cabinets.
@@nickvanhorn681 "Semi-broken" parts stashed in compartments... Sounds like the typical black box techs I come across. I.e. keeps replacing parts until they stumble onto the solution.
Be very careful around sprinkler heads. I worked out of a strip plaza years back and when getting back from deliveries one day arrived to find the unit next door shovelling water out the front door. They were doing some decorating and removed a ceiling tile, and accidentally knocked the sprinkler head off the pipe. It's amazing how much water gushes out of a fire suppression system.
@@dashcamandy2242 We managed to rig up a 50 foot length of 2 inch flex spa hose to direct the torrent out the door. (the store owners were trying to keep up with the deluge by using ceiling tiles to try to shovel water out the front door without addressing the source). We got in touch with the landlord to get the access code for the sprinkler control room to be able to turn the water off to the unit.
@@dashcamandy2242 Unless the system is fed from the city fire mains, it's NEVER clear water at all... The water sits in huge tanks and goes stagnant, scummy and really, REALLY Gross in 90% of fire suppression systems...
You know Chris? I don't work in the same industry; I work for landlords. But each video I watch has made me a better maintenance tech and is a bit of a pick me up. If you are ever in the Ft. Worth area, I'd love to buy you a beer and shoot the shit for a while. Upstanding citizen and thoughtful tech. Thank you for helping to give me some extra conscienceness in my work.
Yes the channel teaches customer service and having some pride in your workmanship. I've seen assholes leave whole compressors and motors also fan blades on the roof. Always clean up your mess that's a finished job. Thanks Chris
FYI, you won't measure any voltage drop across the contactor (or any drop) with no load on it. If you do measure a drop with no load that is a really shitty connection. But no load, no drop. Higher the load, higher the drop.
The contactor is pulled in so there's no potential difference on that one leg.. If one of the contacts wasn't properly pulled in you could see a difference (up to 212V in this case) because there'd be a potential difference between the two points. I'm not sure "voltage drop" is the correct term. More of continuity since it's not under load. You should still see zero volts under load but if it was badly pitted enough you might see a small potential difference to know there's some reactance there.
@@etherealrose2139 He had the motor off, so there was no load when he checked for voltage drop across the contactor. But with no load you won't measure any drop unless it was totally open and in that case you would read nothing.
Yep. You definitely need some kind of load. Without a load there is no voltage across ANY resistance in a circuit. Even an open contact will read zero.
I work for the company that makes those grease filters you see on the roof around these fans a lot (we actually at one point had some on this customers roof as you can tell by the flashing at the bottom of the fan), but I'm just wondering if there are any signs I should be looking out for when installing/doing maintenance on our filters that indicate they have issues with their exhaust fans so they can fix it before something goes catastrophically wrong. I see a ton of fans, and like you said the customer is never going to go up there so I try to keep them as informed as I can
Get a mechanics contact style stethoscope. HF has a cheap one. Start listening to every motor you can. With time and listening you can begin to hear pending failure a good bit before it happens. The more you listen the more you will know what sounds good and what doesnt. I learned this skill as a press mechanic. Way too noisy to hear anything without the stethoscope.
Chris, it took me a while but with your help I finally started my tiny channel. I wanted to thank you for talking about the tools you use and the encouragement to just get videos out there. Wouldn’t have the courage to do it otherwise. But after speaking with you and a few other TH-camrs I finally started learning and getting things off the ground. Good video as always! I’m not in trade but I learn so much from you! 👍
Section 110.26 has detailed specs for "control panels" including location. In no way is above a ceiling acceptable. I see this all the time, inspectors letting this stuff slide. It is both unsafe and inconvenient to work in a ceiling, on a ladder, in a cabinet with multiple motor controls. This may have been in other sections of the code in the past, but it has been there for quiet some time.
Great video and I too prefer to install the bottom wires to the contactor before I install the contactor to the Din Rail as I hate to plug wires into terminals that I can't see.
Another great teaching video! One thing I didn't see was the amp draw on the old motor? Do you remember? It's definitely is another indicator to consider. Thanks again.
Hi, I am a very strict follower of your videos. I am a mech. eng. , and I am working in a different industry but I find your videos informative and educating therefore they are entertaining me as well and you made me interested in HVAC units even though I have nothing to do with them :) . I would like to kindly point out to 1 thing at minute 5.30 that in order to measure a voltage drop across something the device must be turned on, in this case the fan motor should be turned on, and also relay/contactor should be pulled in. This is because according to OHMs Law, V = I x R, therefore in order to measure a Voltage there should be Current and Resistance, in this case since you didnt have the fan motor turned on there was no current thus no Voltage to measure as Voltage drop. Thank you very much once again, kind regards!
Yeah you can't do a voltage drop test across a load without having the circuit energized, but you should be able to find open circuits using this method right? If you have a normal differential meter, seeing a voltage reading between two points would indicate that there's a potential difference, indicating an open circuit. I guess in that case the circuit still needs to be energized, however since there's an open circuit there'd be no current flow. And you'd need to be sure you're testing 2 legs on the same circuit. Maybe I'm misunderstanding
Man i am an hvac tech but im also a watch enthusiast what kind of watch are u wearing in the vids and keep up the great work u help out thousands of young techs
motor starter contact got overheated n melted together but one did not get stuck so it did tricked but other two did and that was why it making loud noises cause customers go up there and turned it off and other cant be turned off later they contacted you because of 2nd motor was making noise (first one was turn off then later other one failure so they called u up) good jobs chance it out
Great video as usual, Chris! We're the same way with looking at the big picture and cleaning up after ourselves. It's amazing how many people get tunnel-vision on jobs and miss the big picture.
Oh, a cafeteria I was volunteering at had the fire suppression system set off (fortunately not when I was there!) and the guys spent a long time cleaning out the fryers. The suppression compound is not toxic, but has a procedure to completely clean it out.. Yikes!
When I would do a maintenance Visit would always tighten all the electrical lug connections because materials metals expand and contract at different rates and temperatures
I had to pull an all nighter replacing pillow blocks on an exhaust fan. It was on the Orange Blossom Trail Ryan's Family Steak House in Orlando FL. I had to wait until 3 am for the fan to cool off enough to touch it. I did maintenance on 21 of the 29 Ryan's in FL. Before I went to work there (corporate employee thru Family Steak House of Florida), they too had no pm service at all. 12 hour days consisted of driving 4 hours, working 4 hours and driving another 4 hours. After a year of going from Daytona Beach, Fort Meyers, Fort Lauderdale, Orlando, Gainesville, Ocala, Tampa & Lakeland I threw in the towel. Shout out to my old boss Bob, you know who you are.
The other day had a call for a Rapid MUA not working. Found the motor was shot. Shorted to ground. Its a 40hp and im gonna have to figure out how to set up a portable gantry to try and get that sucker out of the smallish manhole access for the blower section. Sucker weighs between 400-450lbs. We have to also have a large crane due to how far away he will have to set up and the height of the building. Should be interesting. I might record it and share
The other reason why he doesn't change motor bearings is most motors do NOT have user replaceable parts in them so even if he wanted to, he usually can't pull the old bearings out of a motor without damaging something to the point where he couldn't put the motor back together again IF he was able to get the old bearings off and the new ones back on...
Yeah, its not some 10+ hp pump motor with a bad bearing. Those little shit bird >2 hp motors are rarely worth rebuilding. Especially for a customer that puts stainless steel pans on top of ballasts.
3:00 - "this is going to be a bad one" with wiring like a snake nest. Was that ever inspected? 9:58 - Whenever I do electric that shall be outdoors or in a hostile environment I'll try to go in and out from the underside of the box first and only if that's not feasible at all select other routes. That way there's a lower risk of water and dirt entering the enclosure.
With all the unsecured armored cables and that light ballast just sitting out in the open, No I SERIOUSLY doubt it was inspected and if it was, the Inspector needs to be fired for either Gross Incompetence and/or Accepting Bribes to look the other way...
I used to replace motor bearings. But after I went through replacing bearings in one just to find out the winding had a short in it. I'm doing it less and less.
If it is not possible to change motorstarters with power off I do it with power on. Disconnect one wire insulate it, one at a time. Connecting it just the other way around.
To separate yourself from others is to stay informed and focused on your craft,and be willing to learn new things. Thanks again for the videos! 🍺🍺🍺🥃🥃⛳🎳 Stay safe. Retired (werk'n)keyboard super tech. Wear your safety glasses!
I dont know if you have mentioned it in past vids but What kind of oil or grease do you use on shafts and bearings? Thanks for the great video's I really appreciate them.
Another thing I haven't heard you mention is, always document anything you see or hear, and give customers notice in writing. Like you said cover your butt.
Typically 208 is within the ratings somewhere as 208V 3ph is the most common light industry connection in Murica. I'd be surprised if a motor in the supply house wasn't rated for it.
Chris, you didnt hear the buzzing from that cabinet? really! and then its gone after changing it out! You should know by the noise you had a bad coil in that contactor, think you need some sleep and a break from work dude!
Serious question, how did you know that other motor starter would fit in that space? I had an Allen Bradley starter that I replaced this week that I felt like I had to go back with because nothing else would have fit. Paid WAY too much for it, in my opinion, and our company covers the cost because it’s a full coverage contract.
In this case they are DIN rail mounted and not the neatly wired, so you can slide the other contactors if needed. Plus you can always get the dimensions off the specs and compare ahead of time.
@@inothome thanks. Mine was railed too, but I didn’t have too much wiggle room that I saw. Plus I was in a hurry to get them back on line, but $200 per starter/ contactor is pretty steep to me.
Between abandoned RTU’s, MUA’s, AC’s, and left behind dead motors, compressors, etc. I would bet that there is thousands of tons of scrap and garbage lying around on rooftops in North America right now. I always clean up after the job but some sites are a loosing battle. And the wiring in that place looked like a complete cluster f***...
1:09 Don’t think THEY have even heard of ROUTINE MAINTENANCE 😂 Hilarious, and sad, that 99% of ppl don’t do routine maintenance on ANY appliances (I consider hvac, shower/skin valves, fridge, oven, etc etc) in their house or business…… And the mentality ppl have is: “Deal with it when it Breaks”. Anyone in the tech service trades understands how that’s a double edge sword, and 9/10…..costa you more, imo. Could you imagine only doing an oil change or brake job (or tires) on your car when they completely fail ….engine seizes, brakes give out, and your tires blow. Exactly how silly and dangerous that’ll be🤦🏼 Cheers✌🏻
If stuff finally just stopped breaking without any prior signs whatsoever. If owners got warnings, they could replace equipment before it actually breaks and demands emergency intervention. If only they ever got these signs... 😂
Was on a call at large facility for a R.T.U. problem. Every time I went up/down ladder I took some trash down with me. Maintenance guy checked how it was going and saw all used parts by my ladder. He thought I changed all those parts, but was pissed when he learned it was just trash left behind. Did work there for 10 years exclusively because I took pride in my work, wasn't like other lazy techs.
Nothing worse than a lazy tech and using the roof and equipment as a trash can
On the other hand there are customers who don’t trust that anything was done if there aren’t broken parts and new packaging left behind. 😂
@@ernestrollins383 That's why you show them what you take up and what you bring back down...then they know you did in fact do the replacements AND cleaned up after yourself...
Unlike the other slobs working up there...
I feel like it's 50/50 at projects. Sometimes I clean up and sometimes I don't. There are some jobsites I like to hide semi broken stuff in equipment in case I need to come back for quick repairs. But I generally hide everything in cabinets.
@@nickvanhorn681 "Semi-broken" parts stashed in compartments...
Sounds like the typical black box techs I come across.
I.e. keeps replacing parts until they stumble onto the solution.
Be very careful around sprinkler heads. I worked out of a strip plaza years back and when getting back from deliveries one day arrived to find the unit next door shovelling water out the front door. They were doing some decorating and removed a ceiling tile, and accidentally knocked the sprinkler head off the pipe. It's amazing how much water gushes out of a fire suppression system.
...and it's seldom clear water, at least for the first few minutes. lol
@@dashcamandy2242 We managed to rig up a 50 foot length of 2 inch flex spa hose to direct the torrent out the door. (the store owners were trying to keep up with the deluge by using ceiling tiles to try to shovel water out the front door without addressing the source). We got in touch with the landlord to get the access code for the sprinkler control room to be able to turn the water off to the unit.
Yea 1400psi will move a crap ton of water fast
@V C a lot of fire riser shutoff are chained to prevent tampering.
@@dashcamandy2242 Unless the system is fed from the city fire mains, it's NEVER clear water at all...
The water sits in huge tanks and goes stagnant, scummy and really, REALLY Gross in 90% of fire suppression systems...
You know Chris? I don't work in the same industry; I work for landlords. But each video I watch has made me a better maintenance tech and is a bit of a pick me up. If you are ever in the Ft. Worth area, I'd love to buy you a beer and shoot the shit for a while. Upstanding citizen and thoughtful tech. Thank you for helping to give me some extra conscienceness in my work.
Yes the channel teaches customer service and having some pride in your workmanship. I've seen assholes leave whole compressors and motors also fan blades on the roof. Always clean up your mess that's a finished job. Thanks Chris
Normally close cable to A2 can be put behind the front of the overload cap... Theres a slot for it. it will look neater
FYI, you won't measure any voltage drop across the contactor (or any drop) with no load on it. If you do measure a drop with no load that is a really shitty connection. But no load, no drop. Higher the load, higher the drop.
The contactor is pulled in so there's no potential difference on that one leg.. If one of the contacts wasn't properly pulled in you could see a difference (up to 212V in this case) because there'd be a potential difference between the two points.
I'm not sure "voltage drop" is the correct term. More of continuity since it's not under load. You should still see zero volts under load but if it was badly pitted enough you might see a small potential difference to know there's some reactance there.
@@etherealrose2139 He had the motor off, so there was no load when he checked for voltage drop across the contactor. But with no load you won't measure any drop unless it was totally open and in that case you would read nothing.
good catch, always check them under load. :)
I've always been leery of moving tile with a sprinkler head ..... carefully and deliberately
Looks like an emergency inverter ballast. Takes the place of emergency lights. I use those in my house but I mount them *inside* the unit they power.
At 5:20 you can't do a voltage drop test unless you have a load on it
Yep. You definitely need some kind of load. Without a load there is no voltage across ANY resistance in a circuit. Even an open contact will read zero.
Turning on that bad motor and the crap coming out of it was EPIC!
I work for the company that makes those grease filters you see on the roof around these fans a lot (we actually at one point had some on this customers roof as you can tell by the flashing at the bottom of the fan), but I'm just wondering if there are any signs I should be looking out for when installing/doing maintenance on our filters that indicate they have issues with their exhaust fans so they can fix it before something goes catastrophically wrong. I see a ton of fans, and like you said the customer is never going to go up there so I try to keep them as informed as I can
Get a mechanics contact style stethoscope. HF has a cheap one. Start listening to every motor you can. With time and listening you can begin to hear pending failure a good bit before it happens. The more you listen the more you will know what sounds good and what doesnt.
I learned this skill as a press mechanic. Way too noisy to hear anything without the stethoscope.
Sounding like Mr. Gil Cavey Jr. In that set yourself apart! Amen! Awesome video
That motor was cooked, you covered yourself by bringing up all their issuers . You set the example by your work ethic
Wow. You started changing wires on the motor starter and the music kicked in and nearly made me crap my pants. Thought you got shocked
Chris, it took me a while but with your help I finally started my tiny channel. I wanted to thank you for talking about the tools you use and the encouragement to just get videos out there. Wouldn’t have the courage to do it otherwise. But after speaking with you and a few other TH-camrs I finally started learning and getting things off the ground. Good video as always! I’m not in trade but I learn so much from you! 👍
I love the time laps of the contactor replacement
Section 110.26 has detailed specs for "control panels" including location. In no way is above a ceiling acceptable. I see this all the time, inspectors letting this stuff slide. It is both unsafe and inconvenient to work in a ceiling, on a ladder, in a cabinet with multiple motor controls. This may have been in other sections of the code in the past, but it has been there for quiet some time.
Woot woot, Marathon Electric motor. I work in Wausau Wisconsin. Nice to see a local product. Great video & great job on finding the bad motor starter.
Your 80's movie music is awesome!
YOU MADE THE RIGHT CHOSE . YOU COULD HAVE CHANG THE BEARINGS . BUT THE MOTOR COULD JUST BURN UP 5 MIN LATER . ONCE ITS BEEN OVER HEATED CHANG IT OUT .
Thanks for having a timelapse of the work. Love the details.
Smoke came out of that motor when you started it... you can see where more had been coming out of it earlier as well...
Great video and I too prefer to install the bottom wires to the contactor before I install the contactor to the Din Rail as I hate to plug wires into terminals that I can't see.
Another great teaching video! One thing I didn't see was the amp draw on the old motor? Do you remember? It's definitely is another indicator to consider. Thanks again.
Perfect timing. I'm doing this exact job minus motor starters on Monday. Fan shroud and wheel were full of grease.
Hi, I am a very strict follower of your videos. I am a mech. eng. , and I am working in a different industry but I find your videos informative and educating therefore they are entertaining me as well and you made me interested in HVAC units even though I have nothing to do with them :) . I would like to kindly point out to 1 thing at minute 5.30 that in order to measure a voltage drop across something the device must be turned on, in this case the fan motor should be turned on, and also relay/contactor should be pulled in. This is because according to OHMs Law, V = I x R, therefore in order to measure a Voltage there should be Current and Resistance, in this case since you didnt have the fan motor turned on there was no current thus no Voltage to measure as Voltage drop. Thank you very much once again, kind regards!
Yeah you can't do a voltage drop test across a load without having the circuit energized, but you should be able to find open circuits using this method right? If you have a normal differential meter, seeing a voltage reading between two points would indicate that there's a potential difference, indicating an open circuit. I guess in that case the circuit still needs to be energized, however since there's an open circuit there'd be no current flow. And you'd need to be sure you're testing 2 legs on the same circuit. Maybe I'm misunderstanding
That motor was definitely single phasing, hence the magnetic stress sound. I was hoping you checked the amprobe while filming this. Anyhow, nice job!
I missed that...
Montage music is back!!!
Honestly I feel this channel is not about HVAC but how to do great customer service. Always learning something.
Man i am an hvac tech but im also a watch enthusiast what kind of watch are u wearing in the vids and keep up the great work u help out thousands of young techs
pan-tection LOL 🤣🤣 too funny.
motor starter contact got overheated n melted together but one did not get stuck so it did tricked but other two did and that was why it making loud noises cause customers go up there and turned it off and other cant be turned off later they contacted you because of 2nd motor was making noise (first one was turn off then later other one failure so they called u up) good jobs chance it out
Great shot of the Plenum Spaghetti Monster.
Great video as usual, Chris! We're the same way with looking at the big picture and cleaning up after ourselves. It's amazing how many people get tunnel-vision on jobs and miss the big picture.
I would have to move all the flex conduits across the bored out of the way.Just hate working with it all in the way. Well done for doing it.
Unusual Time, greets from Germany
4:00 What? They didn't bait the trap with a piece of cheese. 😆 Line item on invoice: "Cheese is missing on your ballast trap."
Great video, Chris. Well, that roof doesn't look too too bad. Some you've shown are disaster areas !
Oh, a cafeteria I was volunteering at had the fire suppression system set off (fortunately not when I was there!) and the guys spent a long time cleaning out the fryers. The suppression compound is not toxic, but has a procedure to completely clean it out.. Yikes!
When I would do a maintenance Visit would always tighten all the electrical lug connections because materials metals expand and contract at different rates and temperatures
Worked on all that type of equipment in Florida
I had to pull an all nighter replacing pillow blocks on an exhaust fan. It was on the Orange Blossom Trail Ryan's Family Steak House in Orlando FL. I had to wait until 3 am for the fan to cool off enough to touch it. I did maintenance on 21 of the 29 Ryan's in FL. Before I went to work there (corporate employee thru Family Steak House of Florida), they too had no pm service at all. 12 hour days consisted of driving 4 hours, working 4 hours and driving another 4 hours. After a year of going from Daytona Beach, Fort Meyers, Fort Lauderdale, Orlando, Gainesville, Ocala, Tampa & Lakeland I threw in the towel. Shout out to my old boss Bob, you know who you are.
Good Job 👍
The startup sound of the bad motor was insanely epic
5:30 Doing a voltage drop test without any load is pointless.
always interesting problems
I always leave cleaner than what started. as a guy who cleans them, same here thing. i go unchecked I bring it up. looking at me if i were cazy.
The other day had a call for a Rapid MUA not working. Found the motor was shot. Shorted to ground. Its a 40hp and im gonna have to figure out how to set up a portable gantry to try and get that sucker out of the smallish manhole access for the blower section. Sucker weighs between 400-450lbs. We have to also have a large crane due to how far away he will have to set up and the height of the building. Should be interesting. I might record it and share
Kind of miss my old jobs in Florida
0:09
Hvarc: hmmm
Me: Plastic box +10 protection
The pan over the wires is cause they have a roof leak lmao
when marking wires , a trick i am using is identifying the wire nuts for safety with a sharpie , 1,2,3,4 or with wire paper markers
sneaks over and moves the wire nuts around. label the wires directly 🤪
There is a lot of dirty techs out there that don’t care and leave trash behind. I work the IE area and sometimes the desert
Yep we see it in the IE all the time........
The other reason why he doesn't change motor bearings is most motors do NOT have user replaceable parts in them so even if he wanted to, he usually can't pull the old bearings out of a motor without damaging something to the point where he couldn't put the motor back together again IF he was able to get the old bearings off and the new ones back on...
Definitely not field repairable.
Yeah, its not some 10+ hp pump motor with a bad bearing. Those little shit bird >2 hp motors are rarely worth rebuilding. Especially for a customer that puts stainless steel pans on top of ballasts.
@@kaptaintrips I mean I don’t believe I’ve been able to see through stainless steel before so I don’t believe that’s a stainless pan.
@@baelevatorsmore728 you've never seen perforated stainless? Lol
@@MegaDysart I don’t get out much to be honest. That and no, I don’t believe I’ve seen perforated stainless before.
it's funny to watch a "Telemécanique" equipement. it has been bought by schneider long time ago.
3:00 - "this is going to be a bad one" with wiring like a snake nest. Was that ever inspected?
9:58 - Whenever I do electric that shall be outdoors or in a hostile environment I'll try to go in and out from the underside of the box first and only if that's not feasible at all select other routes. That way there's a lower risk of water and dirt entering the enclosure.
With all the unsecured armored cables and that light ballast just sitting out in the open, No I SERIOUSLY doubt it was inspected and if it was, the Inspector needs to be fired for either Gross Incompetence and/or Accepting Bribes to look the other way...
I’d imagine you wouldn’t see a voltage drop across the contactor without a load on it?
You will see differential voltage (phase to motor) if a contact is really bad (open), creating a missing phase
Good job.
Good work as always.
I used to replace motor bearings. But after I went through replacing bearings in one just to find out the winding had a short in it. I'm doing it less and less.
Baldor rebuilds motors. Just send it back and let them do whatever it needs.
Have you thought about doing periodic video inspections to hand over to these customers? Something similar to a home inspection report?
a head mounted gopro could be a neat idea for the next time you do a wiring timelapse
If it is not possible to change motorstarters with power off I do it with power on. Disconnect one wire insulate it, one at a time. Connecting it just the other way around.
OSHA loves you ( me too) lol
There can't be voltage drop if nothing is consuming power.
TROLL Police! Can I see your LOTO on the breaker please!
That right there is a special UL listed pan lol
To separate yourself from others is to stay informed and focused on your craft,and be willing to learn new things.
Thanks again for the videos!
🍺🍺🍺🥃🥃⛳🎳
Stay safe.
Retired (werk'n)keyboard super tech. Wear your safety glasses!
It bugs me too with engineers leaving rubbish. I always take a picture if colour coded just in case I get distracted.
Oh my word, how did your OCD not kick in with that wire cluster eff? Super awesome osha violations 😄
I like the music
Always play the best music
Just change the contacts and coil in the motor starter very simple and a whole lot cheaper
Old bakery saying "The standard you walk past is the standard you set".
Church is cancelled here in Aus, guess you're my preacher Chris. Give me that HVACR gospel haha
7:50 was i the only one that saw smoke??
Could you save time on site by pre-cutting a bag of jumpers ahead of time instead of one at a time at the box.
I dont know if you have mentioned it in past vids but What kind of oil or grease do you use on shafts and bearings? Thanks for the great video's I really appreciate them.
When's last time somebody greased the bearings Lack of maintenance Gulf electric motor or Grainger or Florida Drives and gears
Ohm the windings first while power is off
Another thing I haven't heard you mention is, always document anything you see or hear, and give customers notice in writing. Like you said cover your butt.
With a piece of tape that ballast won't hurt anyone
you are the first comment
@@williamdowney6606 until it goes bad, overheats and catches that plastic tub on fire.
Man what a cluster. Whoever had the bright idea to put that motor starter cabinet in that location needs to be smacked
Royalty free music was totally '90s teen flix music 🤣
Interesting that you had 208v and the motor was a 230/460v. Also, your replacement was a 230/460v motor as well.
Yeah the motor can handle lower volts too it actually says in the fine printable the bottom of the motor nameplate
@@HVACRVIDEOS No worries, I just stated it as I've ran into a couple that are recommended to not do so. Cheers!
Typically 208 is within the ratings somewhere as 208V 3ph is the most common light industry connection in Murica. I'd be surprised if a motor in the supply house wasn't rated for it.
I would always leave spare belt s
ONLY THING BETTER THAN AN 80S BRAZING MONTAGE IS AN 80S ELECTRICAL MONTAGE
Isn't the ballast supposed to be inside the light fixture?
6:10 motor has done triple the work and then you don't trust it!? It should be 'the motor of the month'!!! 😬
Did you end up not greasing the blower bearing?
Yeah I did, just didn't catch it on camera
not a critical exhaust hood, must be the "fart" extractor lol.
Why you don‘t use ferrules on this flexible wires ?
Ferrules suck. Idk why you Europeans use them
7:50 was that smoke or dust? it looked like fine dust
Angry pixie dust
Chris, you didnt hear the buzzing from that cabinet? really! and then its gone after changing it out! You should know by the noise you had a bad coil in that contactor, think you need some sleep and a break from work dude!
Serious question, how did you know that other motor starter would fit in that space? I had an Allen Bradley starter that I replaced this week that I felt like I had to go back with because nothing else would have fit. Paid WAY too much for it, in my opinion, and our company covers the cost because it’s a full coverage contract.
In this case they are DIN rail mounted and not the neatly wired, so you can slide the other contactors if needed. Plus you can always get the dimensions off the specs and compare ahead of time.
@@inothome thanks. Mine was railed too, but I didn’t have too much wiggle room that I saw. Plus I was in a hurry to get them back on line, but $200 per starter/ contactor is pretty steep to me.
Between abandoned RTU’s, MUA’s, AC’s, and left behind dead motors, compressors, etc. I would bet that there is thousands of tons of scrap and garbage lying around on rooftops in North America right now. I always clean up after the job but some sites are a loosing battle. And the wiring in that place looked like a complete cluster f***...
take how much you think is laying around and multiply that by 10, at minimum and you may be close 🙄
What happened with the single phase fan? Did you replace it and I missed it?
how do you feel when every job is chopped up
1:09 Don’t think THEY have even heard of ROUTINE MAINTENANCE 😂
Hilarious, and sad, that 99% of ppl don’t do routine maintenance on ANY appliances (I consider hvac, shower/skin valves, fridge, oven, etc etc) in their house or business……
And the mentality ppl have is: “Deal with it when it Breaks”. Anyone in the tech service trades understands how that’s a double edge sword, and 9/10…..costa you more, imo.
Could you imagine only doing an oil change or brake job (or tires) on your car when they completely fail ….engine seizes, brakes give out, and your tires blow. Exactly how silly and dangerous that’ll be🤦🏼
Cheers✌🏻
0:54 motor cabinet, single phasing? Is what I'm thinking so far...
1:38 now guessing contacts on starter....
4:59 bad arced shut contacts. Probably overheated or slightly melted overload "spring / coils".
Sounds rough? Shit sounded like a turbine jet when it started. 😳 bearings screaming to be replaced
11:59 what kind of ratchet is that? 😆 to keep the apprentice busy? 😂
If stuff finally just stopped breaking without any prior signs whatsoever. If owners got warnings, they could replace equipment before it actually breaks and demands emergency intervention. If only they ever got these signs... 😂