Audi A4 B9 2.0 TFSI | Wydech Milltek Sport Cat-back Non-resonated exhaust | Wydechowe.pl
ฝัง
- เผยแพร่เมื่อ 11 ก.ย. 2024
- Audi A4 B9 2.0 TFSI wyposażony w układ wydechowy Milltek Sport Cat-back Non-resonated zawierający:
- front pipe,
- przelotowa sekcja środkowa,
- 2x tłumik końcowy,
- końcówki wydechu Tytanowe przypalane GT100 - 100 mm
Modyfikacja wykonana przez UNT Tuning Center
www.wydechowe.pl
www.tuning-center.pl
unttuningcenter
____________________
Audi A4 B9 2.0 TFSI with Milltek Sport Cat-back Non-resonated exhaust system including:
- front pipe
- non-resonated center section
- 2x rear silcencers
- Burnt Titanium tips GT100 - 100 mm
Modification made by UNT Tuning Center from Poland
www.wydechowe.pl
www.tuning-center.pl
unttuningcenter
What does this sound like at highway speed and normal city driving at > 2000RPM?
Hello , it's the same exhaust for the A4 Saloon and Avant ? or you need to adjust for fitting on the A4 Avant ?? Thanks !
Did you guys have any issues with the system fitting on The allroad? We are having issues with the cross brace in the rear, and alignment of everything past the resonator.
christopher Moorman cross brace is a problem on every B9 even in A5. You just need to remove it and the problem is gone. It does not have any important function. We did it in all B9 cars. According to fitting, there is one tricky part. Check how did You fit front pipe (part just after the Downpipe). It fits in 2 ways. The proper one is that the pipe turns into left side of the car. Check this photo - facebook.com/wydechowepl/photos/a.1265913313515024/1265913656848323/?type=3
If You fit it in wrong way then the system will go to high and it turns to the right. You will not be able to fit tips properly and You can damage the shaft.
Marcin Unton I sent your company UNT tuning a message on Facebook.
Do on a 2005-2008 Audi A4 2.0TFSi with Milltek