Subscribe for everything Rc! In this episode of the Traxxas XRT build we install the Hyperflow fans, carbon ESC plate, and @HOBBYWINGOfficial Max5g2 esc.
I run 7.4 volts on my xrt receiver with no problems. It's a myth that that people that don't know and just spread without experience.i have run my on 7.4 volts with my max6 for over 6 months with no problems.good luck.
Hey mate, you really need a rear motor mount / support. As soon as you land a jump your motor will flex that mount. I run 800kv in mine with max5 g2 with m2c motor mount and found you really need to suport the rear of the motor with a motor that long and heavy. I learnt the hard way.
I agree. I stuffed a piece of high density foam under it for now, I have an aluminum support I just got in the mail that I need to install, but I have to remove the motor to turn it in the mount unfortunately, wires are in the way and it supports it too and bottom. And I believe someone is making me 3d printed support shims.
Nice one...i ll start mine soon...i v made a speed test full out thé box and got 76 km/h.. i ll sée After thé upgrade how uch hé Can do! +1sub ! Thanks for visite m'y Channel too🤘👍
I run 7.4 volts on my xrt receiver with no problems. It's a myth that that people that don't know and just spread without experience.i have run my on 7.4 volts with my max6 for over 6 months with no problems.good luck.
Same my 4s slash has been running the bec at 7.4
Awsome build so far cant wait to see the first run.
Thank you for the support! It will be coming soon, keeping the content rollin 🤙
Hell yeah brother!
Fans work amazing and look sweet as well!
Hey mate, you really need a rear motor mount / support. As soon as you land a jump your motor will flex that mount. I run 800kv in mine with max5 g2 with m2c motor mount and found you really need to suport the rear of the motor with a motor that long and heavy. I learnt the hard way.
I agree. I stuffed a piece of high density foam under it for now, I have an aluminum support I just got in the mail that I need to install, but I have to remove the motor to turn it in the mount unfortunately, wires are in the way and it supports it too and bottom. And I believe someone is making me 3d printed support shims.
@@sarversrc awsome mate! Look forward to more content :)
More coming!
9 more till 300 🎉🎉🎉
Yup. The grind is real! Then only 700 more to go 😑
Hello. Very good job. it's a great source of ideas. For Max 5 G2 ESC plate, where you found it ? Thanks
I got it from a guy in the xmaxx and xrt facebook groups. His name is Heath Shirley, he makes them by hand, I’m happy with it!
I’m the one who makes the esc plate.
@dameionshirley8387 is your guy if your wanting the same setup.
Do those fans go into the rx?
Yes I have them to the rx. Can run off a separate battery if you wanted too.
Nice one...i ll start mine soon...i v made a speed test full out thé box and got 76 km/h.. i ll sée After thé upgrade how uch hé Can do! +1sub ! Thanks for visite m'y Channel too🤘👍
Thanks for the support! I’ll check it out and sub
@@sarversrc awesome...thanks dude 🤘👍
No problem!