Always enjoy watching your videos, we have the same tower BAC, lol, my belts are getting loud too, waiting on $$ to be approved, have to do same thing. You the man bro.
must be a trip going to different buildings, with different hvac setups. with every job you probably learn something new. subscribed my man keep up the good work.
Good video Emin. From the looks of how loose those old belts were... that tower was probably screaming. Nice and quiet now..The residents of our fine city, thank you kindly.
Muchas, muchas, muchas gracias. Los ingenieros de un laboratorio te agradecen enormemente. Estabamos bien weyes, jejeje. Thank you very very very much. The engineers of this lab are very gratefull, we sucked hehehe.
👍 This is the same pulley/hub setup, used on my Vermeer tree chipper cutting drum. Been searching the web for hours about guidance on how to separate the two. The hub and pulley are rusted fast, stripped out the threads trying to separate the two. I will Helicoil then try again, but with heat this time. Soaking with penetrating oil for two days was no help.
Nice video Emin .. I also had this similar problem a few days ago but I found out the VFD was set on a low speed but the customer still insisted for us to greased the bearings on the motor and pillow block bearings on the shaft also replace the pulley and belts ..
Nice man. We have to do what ever the customer wants lol . One time a customer insisted for us to replace ten 10HP blower motors that were only 3 years old. They prolly did it for tax breaks lol
I’m changing my air compressor motor for the first time. The pulley inner diameter is slightly different in size. Should all bushings slide that easily onto the shaft as easy as the video? Should I heat up the the QD Bushing to expand it? I notice the inside of the pulley is tapered in
Been down that road before! I cannot understand why they don't make these pulleys in stainless steel to last! The steel sheaves just deteriorate with all the chemicals we use in cooling towers. Thanks for posting!
Not all startup tech know what they r doing emin. Just resetting to what they did. Could just be asking for future problems that makes u look bad. Spend a few n check alignment n tension. U can get trick with lasers on alignment but a string or straight edge work. Tension tool also
Thanks for the advise. I appreciate. However I know that wheel was aligned 200%correctly. I've been working on that tower for 3 years making other repairs. I wouldn't do that on a machine that I wasn't familiar with.
. I like to use a straight edge, however your correct on What your saying. I did double check the alignment just to make sure. Thanks again buddy appreciate the advise
200% what's that. 1/16" per ' of span. Or 1/4 " deflection means more. I like ur vids. I'm a startup tech but not a service guy i enjoy ur vids it's the side I don't see
![Cleaning neglected cooling tower screens [HD]](http://i.ytimg.com/vi/EpqljaA8usU/mqdefault.jpg)
Glad there are people like you on TH-cam. You make trades easier to learn and perform.
It's not often you get to see a master at work. Awesome video, thanks. You saved me a lot of time.
You are spot on about not using impact wrenches for stuff like that. Way to go, and thanks for doing it the right way.
I appreciate your support Bud. Thank you for watching.
Emin, it's a pleasure to watch you tame those big beasts. Thanks for all the tips in the video.
Thanks for the kind words Bud.
Always enjoy watching your videos, we have the same tower BAC, lol, my belts are getting loud too, waiting on $$ to be approved, have to do same thing. You the man bro.
Thanks for this video. It answered my question about how to separate the hub and pulley right off. Awesome.
You have a excellent training skill that your young helpers enjoy learning from.
must be a trip going to different buildings, with different hvac setups. with every job you probably learn something new. subscribed my man keep up the good work.
Good video Emin. From the looks of how loose those old belts were... that tower was probably screaming. Nice and quiet now..The residents of our fine city, thank you kindly.
Yeah that thing was screaming be for. That pully was so bad it was eating the belts and causing them to slip.
i learned a lot from your videos ! keepup the good job
Great Workmanship !
Thank you Emin for share your knowledge.
Trying to become a millwright the channel is very helpful thanks
Good luck from a licensed industrial mechanic Millwright.
Muchas, muchas, muchas gracias. Los ingenieros de un laboratorio te agradecen enormemente. Estabamos bien weyes, jejeje. Thank you very very very much. The engineers of this lab are very gratefull, we sucked hehehe.
Great video Emin!
Thanks Fred, appreciate the support bud.
You made it look easy, great video my bro.
Thanks willie, appreciate the support.
Emin HVAC Yes Sirrrrrr!
👍 This is the same pulley/hub setup, used on my Vermeer tree chipper cutting drum. Been searching the web for hours about guidance on how to separate the two. The hub and pulley are rusted fast, stripped out the threads trying to separate the two. I will Helicoil then try again, but with heat this time. Soaking with penetrating oil for two days was no help.
I enjoyed watching The repair
Great vid!
Que las Martin how are you . I live in Florida’ I went to school for Comercial HVAC . You did A good Trabajo .
Great video Emin.
Thanks David. Your videos are awesome as well.
Nice video Emin .. I also had this similar problem a few days ago but I found out the VFD was set on a low speed but the customer still insisted for us to greased the bearings on the motor and pillow block bearings on the shaft also replace the pulley and belts ..
Nice man. We have to do what ever the customer wants lol . One time a customer insisted for us to replace ten 10HP blower motors that were only 3 years old. They prolly did it for tax breaks lol
I love this guys sense of humor
Great video brother 💯💯💯💯
Nice work guys!
Thank you John
Great works Guys..
Great Video!
Thanks for the support buddy.
no chance very nice and i follow great job
Very Nice. That 's Cool
Another great one Emin
Thanks gain Harry
Nice work Emin HVAC
Another one down good vid
Did 1000s of pulley swaps like this on pumpjack electric motors. Sent it.
Haha 😄 you got balls. I snap them off nearly ever time I try it with a drill.
Video just saved me hours of aggravation. Thanks
Ditto!
Hey emin big fan of your work. Can we be expecting any videos coming soon
I like. your videos Eman and I hope you make more HVAC call videos sincerely TH-camr coin Slocum
You made that look easy.
Lol it was.
When you were taking off the bushing for the sheave, you use the bolts as jacking bolts.
Great video thanks
Thanks you so much for watching.
If you change the belt tention do you need to check the motor amps again?
thanks bro
I’m changing my air compressor motor for the first time. The pulley inner diameter is slightly different in size. Should all bushings slide that easily onto the shaft as easy as the video? Should I heat up the the QD Bushing to expand it? I notice the inside of the pulley is tapered in
thank you
very informative
Our installation: th-cam.com/video/s7RZkYbHhmc/w-d-xo.html
Been down that road before! I cannot understand why they don't make these pulleys in stainless steel to last! The steel sheaves just deteriorate with all the chemicals we use in cooling towers. Thanks for posting!
I totally agree. Thanks for watching bud
That must be too expensive
But worth the investment
You wouldn't have the job then bro
good movie. a lot of of technician miss understand how remove and install pulley
Good job
Supper.
how did u recondition the pulley ? It was completely rusted. Can you please show us
I fucking miss this guy. RIP brother
What happened?
Not sure to be honest but his company said he passed
Nice job emin where is your work place
Hi,, is this taper lock 55 SF ??
HVAC tech thenks
Be snappin'....
Emin are you with a pipe fitters Union?
Good video, I used candle wax, for noisy belts.
No lock out tag out?
If its not a split hub, I run the bolts all the way in and use the pulley like a slide hammer. Pound the hub off using the pulley
great video I was wondering what city are you in, looks really congested lots of people and buildings.
Thanks for watching brother. Yeah man I'm in NYC with lots of buildings and people lol. IT Gets really annoying sometimes lol
Good knowledge sharing, could have been great without the vap waste of time and other stuff
what happened to ya man? really enjoy your videos....but I see you haven't put any new ones up in quite a while. everything ok?
nice work tho
Good stuff! Are you a building engineer or HVAC contractor?
Haha I do the same thing with my ratchet and socket! Click click that 25 ft lbs👍🏻
معلم
what if the pulley is stuck on there , and been used wd40 and other penetrating oil, with no pulley remover tool?
Thanks for taking time to do video
whats your dogs name,, he looks happy
His name is Leo. His just a pup, 9 months old. Thanks for the watching Dennis.
I do miss working on stuff like that!!!! Lol
Yeah I would rather work on the bigger stuff. Lately it's been a mixture of everything for me.
A mix is good too
Nice work Emin HVAC
Rob HVAC thanks Rob.
Hey Emin haven't seen any new videos any more are you on a different channel or doing something else.
What happened to this guy I’ve been rewatching all his videos lol
What are the bolts size did you use to take that Polly off
Use the same 3 bolts .
-Smooth holes to install
-Threaded holes to remove
Just by looks either 8v o d belts
“Click click” LOL
You pull a disconnect and don't open the door to ensure no knife's are broken ?
Lock out, tag out?
I put up my first vid this morning, let me know what you think.
Cool I'm gonna check it out
that's a big pulley
what is your salary ?
this takes a lot of tightening
Not all startup tech know what they r doing emin. Just resetting to what they did. Could just be asking for future problems that makes u look bad. Spend a few n check alignment n tension. U can get trick with lasers on alignment but a string or straight edge work. Tension tool also
Thanks for the advise. I appreciate. However I know that wheel was aligned 200%correctly. I've been working on that tower for 3 years making other repairs. I wouldn't do that on a machine that I wasn't familiar with.
. I like to use a straight edge, however your correct on What your saying. I did double check the alignment just to make sure. Thanks again buddy appreciate the advise
200% what's that. 1/16" per ' of span. Or 1/4 " deflection means more. I like ur vids. I'm a startup tech but not a service guy i enjoy ur vids it's the side I don't see
I ment to say like it's 200% correctly aligned. You know like 100% good lol get it. Thanks I appreciate you watching my videos.
You do just commissioning?
nice job poppy,whats the name of your company? if you dont mine me asking.
Thanks Keith appreciate the support. JP mechanical consultants.
cool. i like the type of jobs your company produced.
I meant Cohen it is Cohen
Start off with the finger
Anyone Know what happened to Emin? He hasn't made a Video since 2015.
Some comments said he died ?
@@xxxdpgxxxx1389 Oh Man, my condolences, he was a great guy teaching HVAC.
跟ㄊㄞ跟台灣差不多
Did you know, when one sheave is worn out, the other "just might be" also?
cool video, you missed the use of anti-seeze and replace all parts... propper way
Bet tension The adjustment was poor. δ = 0.016 × Ls (mm)
Our installation of V belt: th-cam.com/video/s7RZkYbHhmc/w-d-xo.html
벨트가 춤추네 ㅡㅡ 얼마못가겠군
Hahahaha click click.. hahaha
lol
That motor looks bad
No one wants to extract that!!