D22 Navara Build Episode 2 || How to Install LED XTM Driving Lights (Budget Install)
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- In this video, I discuss how I installed a set of 9 inch XTM LED driving lights on my D22 Nissan Navara (Nissan Frontier). These lights cost me under $160 and all I needed was a crimping tool and crimping accessories (male and female connectors). If you were to buy a wiring harness for $70, this setup would only cost $230 if you didn't have driving lights installed before. This is about half the cost of just one of the mid-range lights that was recommended to me at other stores.
These are the exact lights shown in this video:
www.bcf.com.au...
This is the link to the wiring kit that looks similar to mine:
www.supercheap...
Follow me on instagram: @markfernandezmedia
On this channel, watch me build a touring truck (4wd) one step at a time. My goal is to make it capable enough to do some weekend camping and to do my dream trip of Cairns to Kosciuszko.
I am not a professional mechanic or carpenter etc.. As such, all of the information discussed and presented in this video are my opinion. I am not responsible or liable for any loss or damage of any kind incurred as a result of any content communicated on this youtube channel, whether it is by me or a third party. Please engage in the MFM community in a respectful manner so that we can all learn from each other.
Where did you get the clear plastic cover without the big XTM logo in the middle?
It’s the same clear cover that comes with them. If you use a bit of methylated spirits, a cloth and some elbow grease, the logo comes right off.
Mark Fernandez Media oh awesome mate thankyou! Hate the big branding haha
Alex Sallery yes! Me too!
Could you show more on where the wiring harness that the previous owner put in goes? Like as in from the switch, near the pedals and then through the fire wall? Thanks for the vid
For sure. I plan on doing another episode on wiring so I will be sure to include it. Thanks for watching!
Do you find the 9inch to be overly big? I have a pair of 7” and looking to get some new ones, not sure if to go 7 again or 9!
Definitely go for the 9 inch. Just make sure you have enough space. I like the look of the 9 inch lights. Bigger spread of light is always a bonus! Fills up the bull bar nicely too 👍
9 inch how mm in size lights are
Not sure mate. But 1 inch is about 3 cm and 3cm is 10mm