Hi. I have a plc logo 8. And an indicator panel for parking. The panel accept only rs485. The only way to communicate logo plc, with an rs485 module, is using this serial converter IO ?? The question is, from enternet to rs485 is necessary this module yes?
hello, I started making a program for smokehouse, i.e. keeping the temperature at the set time. after an hour, the second timer starts working and maintains the set temperature for the next time, then the third timer turns off and again maintains the set temperature for the selected time. unfortunately I have no experience and I have a stanol in a certain place and I can not do it to keep the temperature for one hour, eg 35 I could send you a project. could you help me
hi,bro. i am testing modbus rtu convert modbus tcp communication with logo 8. i have a lot issues, logo 8 reviced my modbus tcp command, but it dropped my slave id, lead me control loads confusion..... can u help me to give me some advices?
@@jimmyplc7613 Thank u reply sir, i had solved. i had used modbus RTU keypad control loads via logo 8 logic controller, no need warried about modbus tcp protocol , pya attention its proticol length is okay. then plc can recive modbus rtu information. Thank u very much.
Hello, Is it possible to see which cable you used from RS485 to USB serial port of the computer?
Thanks.
Bueno video disculpe ese convertidor me serviría para 3 controladores de temperatura que tienen rs485 al logo
Hi.
I have a plc logo 8. And an indicator panel for parking. The panel accept only rs485.
The only way to communicate logo plc, with an rs485 module, is using this serial converter IO ?? The question is, from enternet to rs485 is necessary this module yes?
Have you already do with s71200 instead of logo PLC? And have tried with more slaves on RTU protocol?
s7 1200 PLC can using Ethernet to Serial converter with RTU slaves protocol.
@@jimmyplc7613 yeah! But do you have any video with s71200 doing that?
hello, I started making a program for smokehouse, i.e. keeping the temperature at the set time. after an hour, the second timer starts working and maintains the set temperature for the next time, then the third timer turns off and again maintains the set temperature for the selected time. unfortunately I have no experience and I have a stanol in a certain place and I can not do it to keep the temperature for one hour, eg 35 I could send you a project. could you help me
is there video for s7-1500 or s7-15200 please ??
you could show how to drive specific bits other devices for example atv320 Schneider
Sorry. I don't have frequency converter.
why do you use id=1 in mosbus server?
I changed modbus slave ID from1 to 255 at 10:06
hi,bro. i am testing modbus rtu convert modbus tcp communication with logo 8. i have a lot issues, logo 8 reviced my modbus tcp command, but it dropped my slave id, lead me control loads confusion..... can u help me to give me some advices?
There is no slave ID in Modbus TCP Server. So, You have to identify it through IP or Port.
@@jimmyplc7613 Thank u reply sir, i had solved. i had used modbus RTU keypad control loads via logo 8 logic controller, no need warried about modbus tcp protocol , pya attention its proticol length is okay. then plc can recive modbus rtu information. Thank u very much.