How to bind the 350QX with a Spektrum DX6i
ฝัง
- เผยแพร่เมื่อ 14 ต.ค. 2024
- We made a short video to help you to bind the new Blade 350 QX with your Spektrum DX6i radio. For more informations regarding this great new Quadopter visit us at: www.horizonhobby.com or www.horizonhobby.de/blade-350qx-quadcopter
Thx, worked with my DX5e too.
You have to reverse the gear (in the menu). And with startup (when he's binded correctly) first switch on the dx6i, after 5 sec you can switch on the 350qx, otherwise you have to bind again
The trim for the throttle must be in the middle position. The throttel stick must turned back, then turn fast to the left and to the right and then immediately back to the center.
After all this, the quadricopter can finally start to fly....
But when it flies is the hammer!!!
Have fun!
I think it's good to note that it looks like you bound it in non-GPS mode? Did you do that because you're inside? And what I call the "2 click trick" with the trim is key for anyone using a DX6i...I found that out the hard way after a frustrating hour!
I have to add to the negatives feedbacks about this quadricopter that there is NOWHERE in the manual informations about the fact that in Smart mode the "thing" doesn't fly without GPS.
Furthermore, in Stability mode the quadricopter works even without GPS.
I realized that after 2 FREAKING DAYS, swearing and thinking I was not setting the quadricopter properly!
So, if you want to fly in Stability modus, you have to switch the dual rate in high modus
Hello
I just bought a used 350 qx2 ... Wich transmitter should I bind with I have a DX4e DX5e and DX6 ?
Thanks
My Blade 350 Qx will not bind with my Dx6i is there any way to test that the problem is not the tx itself I have tried another blade350 and it will not bind with my tx so I am starting to think the tx is bad. It has always worked perfectly but since Mar 23 it has not workked? Thanks for any help
My blade350qx always fly's back side, How can I fix it? I use Dx5e
why are you not talking when you show how to bind. I can't see what switches you are pressing for the binding and is too fast.