Cruze Coolant Bottle Replacement and Coolant Bleeding

[@raymorley8241]

Great video. I assume the same procedure works on the Cruze 1.4.

[@killawattgarage]

Yes it does

[@dmanyeah7963]

Hi Great video easy to follow. Is this same procedure for a Holden Barina TM ? I imagine it would be just only difference would be the location of the overflow bottle ?

[@tyroneclarke1666]

Hi mate. When you drained the coolant bottle. Was that drain valve connected to the whole cooling system draining the entire system. Cheers

[@CACTUS48]

Hi, I have a 2014 Chevrolet Sonic, so to add new coolant, loosen the bleeder screen and fill the overflow tank, where is the old type of pressure release valve that use to be on radiator cap...

[@killawattgarage]

The pressure cap is on the coolant expansion bottle.

[@cesargutierrez2708]

hello good video . question wath zise hose to drain plug .

[@green-b2r]

Thanks for the video. Your coolant was 50 50 mix?

[@Zeek800]

If you live in as area where the temperature goes down guite a bit more than 10 degrees below freezing during the winter you can run 55 coolant / 45 % distilled water.

[@stillboutit]

Hello killa watt garage, can you do a video on how to flush coolant for a Chevy sonic 1.8?

[@killawattgarage]

Will add to the list

[@stillboutit]

​@@killawattgarage thank you for considering the video. That'll be awesome when you make it.

[@stillboutit]

What type of coolant did you use?

[@killawattgarage]

Typically I use a penrite brand

[@stillboutit]

Thanks for responding. What's the difference between Penrite compared to the other coolants? It looked like the one you were using was either pink or red ​@@killawattgarage

[@stillboutit]

Is this the same thing as flushing the cooling system?

[@killawattgarage]

this is more of a drain and refill. flushing often involves pumping fluid through often in the opposite direction to clean out any corrosion etc

[@jonathanpadua9262]

Hi killa watt are you base in adelaide

[@Wdthyfdo]

Hi Killawatt , are you based in Perth ?

[@benwallace1469]

Thanks for showing the bleed valve..

[@killawattgarage]

No worries

[@misacbanglay2076]

Thankyou for sharing this.

[@killawattgarage]

Glad you liked it.