I love how many people complain about a FREE INFORMATIVE VIDEO that someone else took the time to make to help others. If you feel like complaining maybe you should take the time out of your life to make a video. Thank you for the video!! Most of us Mini owners appreciate it.
@@johnviera3884 The battery in this video was replaced with a brand new battery, the battery is charged automatically when it’s inserted into the fob port while driving. The battery goes bad after years of charge cycles. A new battery must be soldered in when keyless entry doesn’t work.
Great video that will save me hundreds fixing my Mini key. Thanks for doing it. Soldering tip: you don't need flux when unsoldering. Flux is an acid that cleans the joint when RE-soldering, so the parts stick together without impurities which prevent a good joint.
I was about to do this on my remote which looks just like this. I mostly take my Mini on short 20min runs to do shopping twice a week so the remote is now starting to act up. I'd take the car into town then it wouldnt lock the car id have to do it manually. Then I read you can charge them via a toothbrush charger and by chance we had one. It was awkward sitting the remote on it because of the shape of the charger but it actually worked! It didnt last long unfortunately, the battery needs replacing. Try charging it first and leave it on it overnight.
Anonymous Person that’s great it worked out for you. But that’s only if the battery is low. If the battery is old, and it won’t hold a charge, the battery must be replaced.
The batteries charge from the ignition by default, so you might have a faulty ignition. Also general pro tip - if you have a spare key with a rechargable battery you should use it a couple of times a year so the battery doesnt "bottom up", eg die prematurely. Youll probably not know if a key a has a rechargable one, but a rule of thumb is everything related to bmw, mini, land rover might have one.
Jeez... I’m stoked right now my R56 came with a 2nd key, I’ll go try find it now, and what the F were BMW thinking? They did a great job at making this a super hard task.
@@sshaunss its not a scam in itself, most car keys have single use batteries that last 2 years as a rule of thumb, rechargable ones last 10-15 years, are also sealed shut so less chance of water damage, well, untill you break the buttons. And pretty much anything non japanese with a single use battery has a nasty chance of desynchronizing from the car, which isnt really a problem, but i guess in england it will cost you an arm and a leg to sync again given that a rechargable bettery change is 100 quid. Id say the rechargable battery model is more user friendly, you buy the car and forget about the key, chance is youd replace the car before the key will bother you, tho 100 quid is a bit too much
Thanks for the info. I couldn't get mine apart with the blade. I was scared to push any harder, mine was glued together good. I used a grinder to take off enough material around the perimeter.
Just tried this myself, unfortunaletely i cut too deep en pushed/broke the locking-switch of the circuitboard. So if you try this, be very carefull when cutting and take your time.
Excellent video well done mate. I notice a few are stating they state an easier way just popping open the case, that is ONLY do able on a completely different fob, SADLY BMW designed this fob uniquely hard to change a £4 battery and crazy ! The only way IS as stated by carefully cutting open the remote case with a blade as described so well done poster. This remote battery only operates the lock and alarm, if it fails open car with the metal key and place the remote body in the remote holder in the car and the alarm will stop and car will start and carry on as normal. BMW sadly avoid instructions on replacing the remote batteries which is obvious by its absence, I believe they hope everyone will just buy a new car every 5 years ! We purchased a new mini and only ever used one key fob, sadly the second fob battery died. What instructions they do give is make sure you use the remote twice per year however they fail to explain why, which obviously means the batteries go flat unless charged. JUST BE CAREFUL USING THE CUTTER.
Thanks to the maker of this video. I had 2 fobs and one stopped working while the other continues to remotely lock and unlock doors &etc. I checked the battery from the fob that stoped working and it was significantly lower voltage than the new one I bought for this project. I changed the battery and it would not operate the remote features. Any one else run into this and what was the fix? Many thanks
The fob is not programmed to the vehicle. Find a procedure for programming online, or go to the dealer and have them program the keyless function for that fob
Jamie Ott I disabled them, people dislike the video because you have to actually solder the battery in instead of just popping the old one out and pop the new one in.. this one actually takes a tad bit of work. I love minis man, the jcw’s are cool
Wow, my son's needs a new battery and could not work out how to get into it. Cannot believe the trouble it takes compared to other cars. BMW really don't like you to do it yourself do they?
It’s typical for German vehicles and slog of foreign car companies.. even their engines need some proprietary tools that have to be purchased by BMW and average tools will not work for certain repairs.
What a great video... thanks! My mini is a 2008 R56S and i dont see any signs of battery to be degraded. Did u notice that your battery needed to be replaced and if so, what gave you that idea? Also i cant find a shell with the mini logo on... where did u get yours?
I found this on eBay. No mini logo though www.ebay.com/itm/382048860930?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AtIgBoiaS1C&sssrc=4429486&ssuid=n0H3CKhgRnC&var=&widget_ver=artemis&media=COPY
Quick question. Why did you replaced the battery? Did it stoped working (opening and closing the doors). The old battery was not recharging anymore? Please let me know because i think this is what it’s happening to my fob. I have a 2008 clubman s and it does. It close all the doors or opens a only the front but don’t unlock the back left door trunk (behind the driver ) it started today
It wouldn’t charge anymore, keyless entry stopped working. Got annoying having to manually lock and unlock the doors. I don’t think your battery is dead, because it won’t be able to function at all, but it’s not working unlocking the rear doors, so it seems like a bigger issue. If it was a dead battery, it won’t unlock or lock at all
I’d say they last 8 to 10 years considering they’re always getting recharged during a drive, and after a while the cell dies. My mothers mini is a 2009 so it lasted 8 years. I don’t think mileage plays a part since her car has 89k miles so it doesn’t matter how many miles it’s been on the road. You still have a good while before your battery won’t hold a charge 👍
What was the reason for putting on a new case, or wouldn't the battery charge anymore? When unsoldering like that I heat the solder and using an air nozzle and quick puff of air I blow the melted solder away.
You can reuse the old case. The original case was old, scratched and grimy.. and had super glue all over it. I highly suggest keeping your original cut key blade, and popping it into a new fresh case.. makes it all feel good and legit
Research I did states capacitor on board might last 30 minutes while swapping soldered batteries to KEEP the Program or Code revolver codes to lock n unlock.....I'm assuming before change ..charge what's chargeable before swap so as not to lose program code revolver data.....if seal or seam is glued...ONE would slice carefully but I BEG to use DREMEL....like everyone says....you might slice in TOO FAR an damage the board component...YES ODD why it's so TUFF for DIY....proprietary HURDLES.😅
Great video. Only thing after i replaced the battery it didn't work till i put it in the docking port. Again much appreciate the video i would of destroyed it for sure.
Chris Shelton it’s a Box Cutter. Thank you for watching rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F142281260172 Folding Lockback Utility Pocket Knife Box Cutter with 5 Extra Blades Belt Clip
Why would this be rechargeable? Is there any documentation that this is a rechargeable fob? It looks like a standard lithium battery. Why would this key fob need to be charged? My Honda key fob is 10 years old and has never been charged
personally i would be interested in if the loading in the key slot still works because anode and cathode are connected to straight connectors instead of circulated like the OEM-cell. because of inductive loading and its architural requirements O_o
Thanks for the upload. Did this and key works great , however i still get the Error ( key with a line through it ) regularly .Is there a reset for this ? cheers
What year-range is this for? The garage I take my 2012 Countryman to, they simply popped the back cover off at the little notch, popped the old batter you and a new one in. Been working like a champ, since then.
Thomas Jones I believe yours has comfort access.. which has a little door in the back that you can access the battery. This is for the 2nd gen mini hatch that recharges using the key fob holder
What’s the most affordable option if you can’t do this at home? I tried auto part store and nobody is up for the challenge. I heard they charge a ridiculous price at MINI so any alternative suggestions?
other option would be: Manually lock/unlock the doors with the key. Ask your whole family if someone knows basic soldering skills, ask a friend, friends friend, friends moms uncles sisters dog who has an owner who knows how to solder. find a someone who can cast a magical spell on the battery to work again 🔋 ⚡️ 🧙♂️
Thanks for the how to, but what is the point of buying a new key fob if it doesn't self lock and unlock more easily. Using crazy glue to secure the new case is just the same as gluing the old case you cut through.
Replacing the plasic case is definitely optional. But the original one was beat and worn out by previous owners, a new case freshens everything up.. for an additional $25 and the benefit of having an all new setup was a bargain. And you are welcome thanks for watching man
Thx very much. I've found the way for long time that how to change the battery. That is idiot design from Mini. If you need to replace the battery, you have to buy the whole key that too costly.
so I did this.. fob worked, didn't fix my issue, something happened and now the fob doesn't work at all 🤣 I'm worried about putting my spare in, I think i might have burnt a chip or resistor when I plugged it in
U shouldn’t hav to change he battery as it charges when in the ignition slot’Ive used both my keys for my 2007 r56 and Berger had to change so far so good
After a while the battery wouldn’t hold a charge. We would have to constantly use the emergency key for the doors. After the battery replacement, it’s working like new. Thanks for watching
Thank you man, I wish I had made it better but I wanted to get the remote working soon. I made the video because there is no other video on TH-cam like it... everything I searched for was false advertisement, I’m glad your key fob works great :)
Using a blade to open the fob makes no sense. The manual says to just remove the cover to replace the battery..nothing about having to take off a seal to replace a battery.
previous owner(s) glued the case shut. There are different fobs, These split in half. Theres actual battery doors on some. This particular style splits in half, and the chrome ring holds the halves together.
I need to buy a box cutter, a soldering iron and a glue gun to change the battery for my 2012 mini copper countryman key fob. You have to be kidding me. What the heck.😢
What kind of question is that. I don’t work for BMW. This is not “BMW OFFICIAL TH-cam PAGE” I’m just showing how to split the stubborn case. Are you scared of sharp objects?
@@IntegraDIY Fair enough. Let me ask a different question. Does the car’s owner’s manual have the instructions on how to replace the fob battery? And the reason I’m asking is because I went to youtube trying to figure out how for a 2011 MINI which belongs to my daughter. We don’t have the manual for that car. However, for my 2015 mini the manual has the instructions. The fob is opened with the key. etc. So maybe I need to search for her car’s owner’s manual online to see what the instructions say for her fob. I just found your instructions odd for a moment because I can’t picture that being in the owner’s manual, and since BMW makes the car then they should have instructions on how to do this. That’s what I meant. 🤓
The video I posted is a sketchy hack way, but it’s pretty easy 👍 I’m not sure how it’s done by the instructions in the manual. But I can help search for it online.. And I apologize about my first reply.. I didn’t know it was an honest question, no BMW will never require someone to open a key fob with a razor blade 😅
Page 25 shows it’s a regular battery.. and not a rechargeable one.. so it’s not much help.. page 20 shows more remote info, but not about how to change the rechargeable battery unfortunately www.miniusa.com/content/dam/mini/PDF/archiveownermanuals/MY02-07/2007_Owners_Manual_Hardtop.pdf
It should still charge even though you used the old original housing. Check your solder connection and make sure you put the battery in correctly, and make sure you used the proper battery
Hey legend Yeah I was worried with new battery’s joints not looping around like the original so check back to this video and it’s all identical to what you used so maybe I got a dodgey battery because it came with no power and won’t even switch brand new
@@joshquintanar9815 no I even checked the voltage on it was charged up, So most likely something about maybe they lose their pairing to the car if the battery goes flat or the receiver is busted
@@pablosanfabio3040 it can lose pairing, but it should let you start the car even if you take the battery out, virtually all cars use an immobilizer for ignition thats seperate from the battery loop.
Please do this to your key only if you like slicing your hands open with that boxcutter and only if you like slicing critical components off of that circuit board! A box cutter IS NOT the way to open these keys! This is not really a DIY job unless you are familiar with miniaturized electronic devices and are skilled at soldering. Besides, changing out the battery will not fix a key that is not starting the car and changing out the battery will not solve the other problem that these keys develop where they drain even a new battery very rapidly. This was just painful to watch.
Replacing the key battery won’t fix a car that has a no start issue, sorry. If you don’t like this video, there’s plenty of others that show how to replace the battery. Take care
@@IntegraDIY Well when you are putting out a video for everyone to watch, you should make sure it is somewhat of descent quality. I will not apologize if I hurt your feelings. Just speaking the truth, thats all.
Mark K Absolutely no need to apologize because you didn’t hurt anyone’s feelings. I specifically made this video to share with others with a dead Mini key. If I knew it was going to get a lot of views and earn me a lot of money, I would’ve used my better camera and much better lighting. I apologize to you for being miserable, I’m sorry.
@@IntegraDIY I appreciate the video. Thank you for taking the time to do this. It was informative and got the point across. Mary K should quit being a Karen and do a video herself if she's that great at critiquing people's video skills.
Thanks so much for the video :) I just wanted to change the battery but it seems absurd that Mini make it so complicated that it's an impossible task for the average layperson. Not impressed with Mini whatsoever 😕
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
I love how many people complain about a FREE INFORMATIVE VIDEO that someone else took the time to make to help others. If you feel like complaining maybe you should take the time out of your life to make a video.
Thank you for the video!! Most of us Mini owners appreciate it.
100%
I agree, useful info that he took his own time to post.
Well said
WTG Deja !
@@johnviera3884 The battery in this video was replaced with a brand new battery, the battery is charged automatically when it’s inserted into the fob port while driving. The battery goes bad after years of charge cycles. A new battery must be soldered in when keyless entry doesn’t work.
I appreciate that you also added the battery type in the Discription.
Great video that will save me hundreds fixing my Mini key. Thanks for doing it. Soldering tip: you don't need flux when unsoldering. Flux is an acid that cleans the joint when RE-soldering, so the parts stick together without impurities which prevent a good joint.
Great tip thanks for sharing.
you saved me! Mini cooper gave us an outrageous cost for replacing our keys and found this video....will be trying it this! Thank you so much!
I was about to do this on my remote which looks just like this. I mostly take my Mini on short 20min runs to do shopping twice a week so the remote is now starting to act up. I'd take the car into town then it wouldnt lock the car id have to do it manually. Then I read you can charge them via a toothbrush charger and by chance we had one. It was awkward sitting the remote on it because of the shape of the charger but it actually worked! It didnt last long unfortunately, the battery needs replacing.
Try charging it first and leave it on it overnight.
Anonymous Person that’s great it worked out for you. But that’s only if the battery is low. If the battery is old, and it won’t hold a charge, the battery must be replaced.
@@IntegraDIY Yes, ive got this video saved for when that happens just thought it might be worth mentioning before drivers cut the key open
Good info I change my battery and it still don’t charge, I may have issues on the car side so I’ll try this out
Actually the manual for my 2008 does say you have to use the key in the car a couple of times per year atleast to keep it charged.
The batteries charge from the ignition by default, so you might have a faulty ignition.
Also general pro tip - if you have a spare key with a rechargable battery you should use it a couple of times a year so the battery doesnt "bottom up", eg die prematurely.
Youll probably not know if a key a has a rechargable one, but a rule of thumb is everything related to bmw, mini, land rover might have one.
Jeez... I’m stoked right now my R56 came with a 2nd key, I’ll go try find it now, and what the F were BMW thinking? They did a great job at making this a super hard task.
They were thinking how can we rinse people out of £100s I just laughed my ass of at them when they said
@@sshaunss its not a scam in itself, most car keys have single use batteries that last 2 years as a rule of thumb, rechargable ones last 10-15 years, are also sealed shut so less chance of water damage, well, untill you break the buttons.
And pretty much anything non japanese with a single use battery has a nasty chance of desynchronizing from the car, which isnt really a problem, but i guess in england it will cost you an arm and a leg to sync again given that a rechargable bettery change is 100 quid.
Id say the rechargable battery model is more user friendly, you buy the car and forget about the key, chance is youd replace the car before the key will bother you, tho 100 quid is a bit too much
They were thinking how can we get more money out of our customers in the future?
Thanks for the info. I couldn't get mine apart with the blade. I was scared to push any harder, mine was glued together good. I used a grinder to take off enough material around the perimeter.
Just tried this myself, unfortunaletely i cut too deep en pushed/broke the locking-switch of the circuitboard. So if you try this, be very carefull when cutting and take your time.
Excellent video well done mate. I notice a few are stating they state an easier way just popping open the case, that is ONLY do able on a completely different fob, SADLY BMW designed this fob uniquely hard to change a £4 battery and crazy !
The only way IS as stated by carefully cutting open the remote case with a blade as described so well done poster.
This remote battery only operates the lock and alarm, if it fails open car with the metal key and place the remote body in the remote holder in the car and the alarm will stop and car will start and carry on as normal.
BMW sadly avoid instructions on replacing the remote batteries which is obvious by its absence, I believe they hope everyone will just buy a new car every 5 years !
We purchased a new mini and only ever used one key fob, sadly the second fob battery died.
What instructions they do give is make sure you use the remote twice per year however they fail to explain why, which obviously means the batteries go flat unless charged.
JUST BE CAREFUL USING THE CUTTER.
That is insanely complicated. great video!
not so much complicated....Installing a timing chain in your mini...that's complicated.
great video, but i decided to sell my mini after knowing how much they hate their users.
Thanks to the maker of this video. I had 2 fobs and one stopped working while the other continues to remotely lock and unlock doors &etc. I checked the battery from the fob that stoped working and it was significantly lower voltage than the new one I bought for this project. I changed the battery and it would not operate the remote features. Any one else run into this and what was the fix? Many thanks
The fob is not programmed to the vehicle. Find a procedure for programming online, or go to the dealer and have them program the keyless function for that fob
How do you have so many views, but no likes? Lol. I gave you a thumbs up. Screw Mini Cooper, I swear.
Jamie Ott I disabled them, people dislike the video because you have to actually solder the battery in instead of just popping the old one out and pop the new one in.. this one actually takes a tad bit of work. I love minis man, the jcw’s are cool
Wow, my son's needs a new battery and could not work out how to get into it. Cannot believe the trouble it takes compared to other cars. BMW really don't like you to do it yourself do they?
It’s typical for German vehicles and slog of foreign car companies.. even their engines need some proprietary tools that have to be purchased by BMW and average tools will not work for certain repairs.
What a great video... thanks!
My mini is a 2008 R56S and i dont see any signs of battery to be degraded. Did u notice that your battery needed to be replaced and if so, what gave you that idea?
Also i cant find a shell with the mini logo on... where did u get yours?
Got mine from eBay
@@laurenceking2014 any chance you might still have that seller's info and also was it an original shell?
I found this on eBay. No mini logo though
www.ebay.com/itm/382048860930?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=AtIgBoiaS1C&sssrc=4429486&ssuid=n0H3CKhgRnC&var=&widget_ver=artemis&media=COPY
Quick question. Why did you replaced the battery? Did it stoped working (opening and closing the doors). The old battery was not recharging anymore? Please let me know because i think this is what it’s happening to my fob. I have a 2008 clubman s and it does. It close all the doors or opens a only the front but don’t unlock the back left door trunk (behind the driver ) it started today
It wouldn’t charge anymore, keyless entry stopped working. Got annoying having to manually lock and unlock the doors.
I don’t think your battery is dead, because it won’t be able to function at all, but it’s not working unlocking the rear doors, so it seems like a bigger issue.
If it was a dead battery, it won’t unlock or lock at all
How long will a battery last before it needs to be changed? I got mine out that's from 2013 and it tests 3V still? Thanks for the video!
I’d say they last 8 to 10 years considering they’re always getting recharged during a drive, and after a while the cell dies. My mothers mini is a 2009 so it lasted 8 years. I don’t think mileage plays a part since her car has 89k miles so it doesn’t matter how many miles it’s been on the road.
You still have a good while before your battery won’t hold a charge 👍
What was the reason for putting on a new case, or wouldn't the battery charge anymore? When unsoldering like that I heat the solder and using an air nozzle and quick puff of air I blow the melted solder away.
You can reuse the old case. The original case was old, scratched and grimy.. and had super glue all over it. I highly suggest keeping your original cut key blade, and popping it into a new fresh case.. makes it all feel good and legit
How about immobiliser ? Is it build in or it’s inside the key fob ?
Research I did states capacitor on board might last 30 minutes while swapping soldered batteries to KEEP the Program or Code revolver codes to lock n unlock.....I'm assuming before change ..charge what's chargeable before swap so as not to lose program code revolver data.....if seal or seam is glued...ONE would slice carefully but I BEG to use DREMEL....like everyone says....you might slice in TOO FAR an damage the board component...YES ODD why it's so TUFF for DIY....proprietary HURDLES.😅
Great video. Only thing after i replaced the battery it didn't work till i put it in the docking port. Again much appreciate the video i would of destroyed it for sure.
I bought a replacement battery but didnt come with that metal bit attached to it.where do i buy a battery with the metal bit attached please???
How did you get the silver coloured metal trim/ring off, and then back on, please?
Fingernail and pry off
@@IntegraDIY Thank you!
Hi thanks for the video, could you tell me the name of the knife you use to open the case with.
Thank you
Chris Shelton it’s a Box Cutter. Thank you for watching
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F142281260172 Folding Lockback Utility Pocket Knife Box Cutter with 5 Extra Blades Belt Clip
U have a link to where u bought ur spare?
thanks for the video! where have you bought the replacement key?
+Nicole Cassiano you are very welcome, I updated the description, I posted an eBay link to it. That's the exact same one I got
Thank you!
Why would this be rechargeable? Is there any documentation that this is a rechargeable fob? It looks like a standard lithium battery. Why would this key fob need to be charged? My Honda key fob is 10 years old and has never been charged
Wanna know why it charges and also soldered in? Because German. Try mini2 dot com. They have a lot of valuable info 👍
@@IntegraDIY I’m replacing the batteries. Didn’t realize it charges. The batteries no longer hold a charge
personally i would be interested in if the loading in the key slot still works because anode and cathode are connected to straight connectors instead of circulated like the OEM-cell. because of inductive loading and its architural requirements O_o
Thanks for the upload. Did this and key works great , however i still get the Error ( key with a line through it ) regularly .Is there a reset for this ? cheers
Here I thought it was going to be simpler than this...
You can get a complete soldering kit for $15-$20 and it’ll take like 30 minutes to complete. You can do it and save $$ 👍
Hellow what is the model of the batery. Thankyou from Chile
2008 mini cooper sports replace fob and key NEW how to program to caf
Thank you very much for helping mini cooper owners 👍👍👍💪🦾❤
What year-range is this for? The garage I take my 2012 Countryman to, they simply popped the back cover off at the little notch, popped the old batter you and a new one in. Been working like a champ, since then.
Thomas Jones I believe yours has comfort access.. which has a little door in the back that you can access the battery.
This is for the 2nd gen mini hatch that recharges using the key fob holder
Integra DIY, thanks for this video. .
😎
Me gustaría saber si el botón de arranque está duro de mi minutos o es blandito
hi thanks for the video, what material is it that you use to stop the pile, min 10:38? can not you use the pond? thanks !!!!
WTF did MINI need to solder it in?
Number for battery required would have been nice.
Coby7 hello Coby 👋 check the description my friend, it’s been posted there for the longest
Great video and content, but WTF is the deal with this battery change needing a soldering gun? Not your fault I know, but dang why did BMW do that?
What’s the most affordable option if you can’t do this at home? I tried auto part store and nobody is up for the challenge. I heard they charge a ridiculous price at MINI so any alternative suggestions?
other option would be:
Manually lock/unlock the doors with the key.
Ask your whole family if someone knows basic soldering skills, ask a friend, friends friend, friends moms uncles sisters dog who has an owner who knows how to solder.
find a someone who can cast a magical spell on the battery to work again 🔋 ⚡️ 🧙♂️
$11 batteries from Amazon. Was careful taking the original fob apart so no need for replacement fob. So $11 and about an hour of time.
I have no battery on mine? R60 countryman... My car has confort access and I don’t know how to send pics
Thanks for the how to, but what is the point of buying a new key fob if it doesn't self lock and unlock more easily. Using crazy glue to secure the new case is just the same as gluing the old case you cut through.
Replacing the plasic case is definitely optional. But the original one was beat and worn out by previous owners, a new case freshens everything up.. for an additional $25 and the benefit of having an all new setup was a bargain. And you are welcome thanks for watching man
Thank you for the video, I followed the method, perfect !
👍👏
Thx very much. I've found the way for long time that how to change the battery. That is idiot design from Mini. If you need to replace the battery, you have to buy the whole key that too costly.
Its a consumer idiot design...but a genius corporate because it forces their customers to get the key fob services at their locations for extra $$$
so I did this.. fob worked, didn't fix my issue, something happened and now the fob doesn't work at all 🤣 I'm worried about putting my spare in, I think i might have burnt a chip or resistor when I plugged it in
Gracias por el vídeo, en el concesionario BMW, me piden 181 euros por 1 llave nueva.
U shouldn’t hav to change he battery as it charges when in the ignition slot’Ive used both my keys for my 2007 r56 and Berger had to change so far so good
After a while the battery wouldn’t hold a charge. We would have to constantly use the emergency key for the doors. After the battery replacement, it’s working like new. Thanks for watching
Mine seem to work good so far so that’s good and Yeah good video mate
Thank you man, I wish I had made it better but I wanted to get the remote working soon. I made the video because there is no other video on TH-cam like it... everything I searched for was false advertisement, I’m glad your key fob works great :)
Integra DIY Ur video will help ppl if the battery goes mate So that’s a good video
Damn this makes sense! Thanks
what glue r u using
Ugh I’m too much of a wimp so I’ll head to my dealership :( thanks for the video tho!
New fob and new key how to program
Using a blade to open the fob makes no sense. The manual says to just remove the cover to replace the battery..nothing about having to take off a seal to replace a battery.
previous owner(s) glued the case shut. There are different fobs, These split in half. Theres actual battery doors on some. This particular style splits in half, and the chrome ring holds the halves together.
I need to buy a box cutter, a soldering iron and a glue gun to change the battery for my 2012 mini copper countryman key fob. You have to be kidding me. What the heck.😢
It worked, yay!
Alguien sabe a qué temperatura debe estar el Cautin ??
Nice vid. Thanks for your time, it’s very much appreciated Buddy.
O pil şarzlı değiştirmeyin !... zaten bulamassınız piyasada.
Where can i buy the battery and is it 2032 or 2020
Hey man, thanks for watching. All info has been in the description 👍
Thanks for the info, although your soldering skills are very lacking, still some good information here.
@Joe O'Hanlon I'd also use some solder wick.
Joe O'Hanlon I was thinking the same thing!
You can never have too much flux, after I put flux, I’ll solder then use more flux followed by more flux
A razor blade? Is that how BMW intended this to be done?
What kind of question is that. I don’t work for BMW. This is not “BMW OFFICIAL TH-cam PAGE” I’m just showing how to split the stubborn case. Are you scared of sharp objects?
@@IntegraDIY Fair enough. Let me ask a different question. Does the car’s owner’s manual have the instructions on how to replace the fob battery? And the reason I’m asking is because I went to youtube trying to figure out how for a 2011 MINI which belongs to my daughter. We don’t have the manual for that car. However, for my 2015 mini the manual has the instructions. The fob is opened with the key. etc. So maybe I need to search for her car’s owner’s manual online to see what the instructions say for her fob.
I just found your instructions odd for a moment because I can’t picture that being in the owner’s manual, and since BMW makes the car then they should have instructions on how to do this. That’s what I meant. 🤓
The video I posted is a sketchy hack way, but it’s pretty easy 👍 I’m not sure how it’s done by the instructions in the manual. But I can help search for it online..
And I apologize about my first reply.. I didn’t know it was an honest question, no BMW will never require someone to open a key fob with a razor blade 😅
Page 25 shows it’s a regular battery.. and not a rechargeable one.. so it’s not much help.. page 20 shows more remote info, but not about how to change the rechargeable battery unfortunately
www.miniusa.com/content/dam/mini/PDF/archiveownermanuals/MY02-07/2007_Owners_Manual_Hardtop.pdf
@@IntegraDIY Appreciate it much! Thanks for the help!
I replace the battery but not change the key fob housing and it didn’t charge up :,(
It should still charge even though you used the old original housing. Check your solder connection and make sure you put the battery in correctly, and make sure you used the proper battery
Hey legend Yeah I was worried with new battery’s joints not looping around like the original so check back to this video and it’s all identical to what you used so maybe I got a dodgey battery because it came with no power and won’t even switch brand new
Same issue. Was it a dead battery?
@@joshquintanar9815 no I even checked the voltage on it was charged up,
So most likely something about maybe they lose their pairing to the car if the battery goes flat or the receiver is busted
@@pablosanfabio3040 it can lose pairing, but it should let you start the car even if you take the battery out, virtually all cars use an immobilizer for ignition thats seperate from the battery loop.
Thank you 👊
Jack FM ... :)
+pinkeye00 it's my mothers vehicle, and that's all she listens to lol good eye ;)
Actually .. its a good station for some classics. I like it.
The most stupid key in the world
Thank you a lot!
It looks like a capacitor ... not a battery!
so you not familiar with electronics huh lol
WANTED TO KNOW HOW TO TAKE THE RING OFF THE FOB!!! SMDH!!!😖😖😖
Not for 2011 mini cooper!
Andy this style fob is for the second gen base model
People, you do not cut open key fob housing! They pry apart with a screwdriver unless the housing was glued together by previous owner or yourself!
Eror punya sya 1 krn ga prnah d pake
WTF??
BMW shit the bed on a simple procedure!
Whassa badderee
Reason #98367 that I hate Mini Cooper!!!!
All this crap just to change a bloody key fob battery honest to christ 🙄
6u
THIS IS WHY I TOLD ALL MY CUSTOMER TO STAY AWAY FROM MINI CAR. POOR DESIGN
Please do this to your key only if you like slicing your hands open with that boxcutter and only if you like slicing critical components off of that circuit board! A box cutter IS NOT the way to open these keys! This is not really a DIY job unless you are familiar with miniaturized electronic devices and are skilled at soldering. Besides, changing out the battery will not fix a key that is not starting the car and changing out the battery will not solve the other problem that these keys develop where they drain even a new battery very rapidly. This was just painful to watch.
Replacing the key battery won’t fix a car that has a no start issue, sorry. If you don’t like this video, there’s plenty of others that show how to replace the battery. Take care
@@IntegraDIY what a wanker response
Wow, you really need to work on your video skills.
Wow, you really need to work on being a nice positive person.
@@IntegraDIY Well when you are putting out a video for everyone to watch, you should make sure it is somewhat of descent quality. I will not apologize if I hurt your feelings. Just speaking the truth, thats all.
Mark K Absolutely no need to apologize because you didn’t hurt anyone’s feelings. I specifically made this video to share with others with a dead Mini key. If I knew it was going to get a lot of views and earn me a lot of money, I would’ve used my better camera and much better lighting. I apologize to you for being miserable, I’m sorry.
@@IntegraDIY I appreciate the video. Thank you for taking the time to do this. It was informative and got the point across. Mary K should quit being a Karen and do a video herself if she's that great at critiquing people's video skills.
Thanks so much for the video :)
I just wanted to change the battery but it seems absurd that Mini make it so complicated that it's an impossible task for the average layperson. Not impressed with Mini whatsoever 😕