Get 15% off your Carly purchase with code "BNB" (auto-applied) until May 15, 2024 when you click: bit.ly/Carly_BuiltNotBought Carly's scanner and free version of the app with standard OBD features are compatible with cars that have an OBD2 port. To see if Carly's advanced features - like coding or manufacturer-level diagnostics - should work with your car, make sure to check out their website. To access these additional features, you'll need to get their yearly license
I used V8 Commodore mounts on mine sitting on a bit of box sections where the old delica mounts were. Sent Sam a pic of it on messenger. Nice to see you finally getting onto this. I've been waiting for it. Surprised you went with that old body though. You might have found another one with a blown motor and good body for cheap.
Aisin is the gearbox manufacturer / supplier for Toyota as well as Isuzu and Mitsubishi vehicles, that is likely why the bolting patterns match, the new Isuzu, hilux and triton gearboxes are all manufactured by the same company to this day - Aisin once again.
Yes, the Aisin Warner 4 speed auto was used in many vehicles of the 90's. This means the UZ series V8's will bolt up to the trans of many different vehicles. Toyota, Mitsi, Isuzu also Jeep and even Volvo
Dont bother with the old shitter. Get a straight, decent condition Delica and SAS it and dualcab chop it with the 1uz and actually build a decent roadworthy 4x4 that you can use that nobody has ever seen before 🤷♂️
They really need to do a 6.4 Hemi swap on that Jeep WJ. They fit quite well with the car intake (don't use the truck intake) and bolt up to the 545rfe trans without any problems. Add the 241hd transfer box (not the 241J) and that thing would be a beast.
About that Carly OBD2 scan tool....I'm pretty sure there basically useless, you pay for the unit but then you need to pay for a yearly subscription to unlock its full potential otherwise there no better then the eBay jobs....
If you use the factory ecu them things are known do have leaking capacitors and absolutely rob the motor of power. Also the factory airflow meters hate any form of moisture... best of replacing the dizzy caos and rotors i bet they have massive cracks in them any way.
Fuck Carly lol. Bought their kit for my BMW. Paid a pretty penny for the software and proprietary hardware a while ago, and then again some for some basic add ons in the app, and yet they'll keep asking for more for any new features or updates they release.
What a mess. Not sure why you guys even bothered putting this episode together. Maybe focus on doing one thing well instead of 12 different things totally sh!t. Bring back the old days of Sam actually paying attention to what he's building and doing things properly instrad of flogging something together for the sake of creating content.
Totally agree mate. Dont get me wrong, an engine swap with a 1uz into a delica is totally what this channel used to be about and plenty of people would get great info from this vid - if done well. It does seem like this is haggered shit jusy slapped together with zero Fs. I struggle to see a folded sheetmetal lifting point on the 1uz “just snapping” mine has been lifted with the same point dozens of times. Id say the engine got hooked up on the rad support and ol’ mate just yanked the engine crane out. Its more comical than quality build 😂
![ร้อยพ่อพันแม่ - WanMai [Official MV]](http://i.ytimg.com/vi/XY2pNYASEbg/mqdefault.jpg)
Get 15% off your Carly purchase with code "BNB" (auto-applied) until May 15, 2024 when you click: bit.ly/Carly_BuiltNotBought
Carly's scanner and free version of the app with standard OBD features are compatible with cars that have an OBD2 port. To see if Carly's advanced features - like coding or manufacturer-level diagnostics - should work with your car, make sure to check out their website. To access these additional features, you'll need to get their yearly license
22:46 id be sitting on a camp chair with a beer watching the delica burn to the ground by now.
I used V8 Commodore mounts on mine sitting on a bit of box sections where the old delica mounts were. Sent Sam a pic of it on messenger. Nice to see you finally getting onto this. I've been waiting for it. Surprised you went with that old body though. You might have found another one with a blown motor and good body for cheap.
Seems like sammy's making a return to form, nice to see keep up the content
22:27 I’ve had an absolute c#*t of a day…..😂
1uz came out in late 80's. Remember the V8 toyota soarers or lexus LC400?
Poor Mitch 😂
If he didn’t have bad luck, he’d have no luck at all 😢
Aisin is the gearbox manufacturer / supplier for Toyota as well as Isuzu and Mitsubishi vehicles, that is likely why the bolting patterns match, the new Isuzu, hilux and triton gearboxes are all manufactured by the same company to this day - Aisin once again.
Yes, the Aisin Warner 4 speed auto was used in many vehicles of the 90's. This means the UZ series V8's will bolt up to the trans of many different vehicles. Toyota, Mitsi, Isuzu also Jeep and even Volvo
The Sexy delica is bloody back!
It’s been too long hahah
When it's upside-down it's 180° , not 360°
Don't worry, be happy 😊
seen the thing on the trailer 4-5 days ago cool to know you guys own it haha
Dont bother with the old shitter. Get a straight, decent condition Delica and SAS it and dualcab chop it with the 1uz and actually build a decent roadworthy 4x4 that you can use that nobody has ever seen before 🤷♂️
😂😂
Not going to happen
@@speyles Tray back, dualcab Delica on GU diffs and 35s? Cmon bro thats fucken sick
@@singgs19why not?
Nah mate. Old shitters ftw
Great Video Guys. I would ditch that Engine Crane and use the Forklift instead. Much safer.
Should do like a super clean wagon touring build with the gq
Show everyone a wagon touring sets up
Gq build can’t wait for you start that 👌🏽
They really need to do a 6.4 Hemi swap on that Jeep WJ. They fit quite well with the car intake (don't use the truck intake) and bolt up to the 545rfe trans without any problems. Add the 241hd transfer box (not the 241J) and that thing would be a beast.
just got a carly for my everyday keen to see how it works
About that Carly OBD2 scan tool....I'm pretty sure there basically useless, you pay for the unit but then you need to pay for a yearly subscription to unlock its full potential otherwise there no better then the eBay jobs....
Also so many of the read outs said N/A
And they paid old mate to fill 1/4 of an episode with the infomercial for it.
@@Alan.livingstonshh, that's how it works, nothing to see here boys.
Finally the deleaky is back
What is the vancruiser doing back in the background
given they are moving the delica around with patrol id say it was filmed a while ago
Exit the exhaust out the Bluetooth stack. That would be sick.
If you use the factory ecu them things are known do have leaking capacitors and absolutely rob the motor of power. Also the factory airflow meters hate any form of moisture... best of replacing the dizzy caos and rotors i bet they have massive cracks in them any way.
Poor Mitch. Hard few weeks at the office. Seemed so dejected.
Oh wow! Oi Mitch, How's ya day goin? 😮🤣 #TheCurseIsReal
Fuck Carly lol. Bought their kit for my BMW. Paid a pretty penny for the software and proprietary hardware a while ago, and then again some for some basic add ons in the app, and yet they'll keep asking for more for any new features or updates they release.
Hi Sam what are you doing with the Jeep? I'd like that Jeep, I've got 4 Jeep's.
is this an older episode, due to the old XC Falcon Body at the start ? :P
which is now the FLEX C ?
That an the cruiser is on the hoist?
If you actually watched the whole video he does say that all the first half was filmed a year ago, then cuts to present and continues the build...
10:38 the chaper is called 1 year later...
Shhhh😂
Good we need more mitsi content 😎
Dude noooooooo! Wanted to see you build the 2.8T
Hell yea. Way more interesting.
The 4M40 is an unreliable pile of junk. Always overheat and crack the heads. Worst diesel ever produced by Mitsi. The boys probably knew this.
Lovin the content boys 🔥
What about the poor old NJ 2.8 turbo? Would ya sell it?
Definitely need a new cab
Delica is cursed ? seems like Mitch is just hard on the gear
Shut up
Solid axle swap it 🙌
New Tattoo !
Why’s the 80 series back?
Wow, that thing really is cursed.
There moto is, ''We're slow, but we're Rough''...
No computers on my car, the most advanced thing on it is an 18 year old CD player.
Can the F truck get a 7.3l godzilla engine swap
Hay dose that carly thing talk to vy ls1 computer? Or is that to old
if its got obd then ye
Ye boi 🤙🤙🔥🔥
Ummmm…..is the 80 on the hoist???
Bro thought the same thing, it is.
It must have been before he gave it away
crazy
Feel bad for Mitch 😕
You start work at 9? 🎉😂
Next time broheme, 😂
Td42 engine please
Step one roll delica off the biggest cliff
Was he vaping
Why is the 80 that you guys gave away there and the gu put back together and the very sexy delica is back
At 10:40 he said the first part was a year ago
Oh thank I didn’t listen enough 😅
boss
That’s a carton !
What a mess. Not sure why you guys even bothered putting this episode together. Maybe focus on doing one thing well instead of 12 different things totally sh!t. Bring back the old days of Sam actually paying attention to what he's building and doing things properly instrad of flogging something together for the sake of creating content.
The episode gave the impression that they just don't give a shit
@@andrewhoegee6465 Talk about bland. What a bunch of tossers.
Totally agree mate. Dont get me wrong, an engine swap with a 1uz into a delica is totally what this channel used to be about and plenty of people would get great info from this vid - if done well. It does seem like this is haggered shit jusy slapped together with zero Fs. I struggle to see a folded sheetmetal lifting point on the 1uz “just snapping” mine has been lifted with the same point dozens of times. Id say the engine got hooked up on the rad support and ol’ mate just yanked the engine crane out.
Its more comical than quality build 😂
The whole channel is shiit now.
I agree with how it used to be and actually giving a shit about the project.
That poor 1uz.
are you
Butchered no Bought
lol how fucking long is the engine & gearbox wtf
STOP GETTING HUNGRY WITH THE ADS
Alot of bad reviews with carly. Not good business ethics
Pronouced Delisha not Delika
Idk man, this whole video was a s#!t show, maybe that thing really is cursed
no one cares wheres the flex c sends bro
Where has that chick gone
Nope😊
This was shit😂