Hello my friend I hope this finds you well. As usual I am asking for help Thanks to you I now have the brass tubing 😅 However again I need your help . The wire for the jet is becoming hard to find in the UK . GETTING 0.1 MM WIRE IS NOT A PROBLEM. HOWEVER ITS TOO SOFT EVEN IF I ORDER HARD WIRE. Could you please ery kindly supply a link for the wire you use .it seems stiffer than the 4 lots I have purchased. Thanking you in advance . P.S could you make a video on re coating the vent on a coleman northstar lantern I believe its coated in Porcelain. Lol just a thought Thank you Take care Keith Wigan United Kingdom 🇬🇧
Thanks for reaching out. The link I provided most likely is for ASEAN region. I believe u able to get it in Ebay as I search & able to find it. The 0.1mm I'm using is softer than the original one, have to do it gentle so that to prevent breaking it especially when clamping the edge between the tube & the wire.
Thank you. I manage to DIY on coil spring for Northstar, the external spring not the internal spring. Shouldn't be a problem, just need different material to create one.
Hello my friend I hope you can help me I am in the UK by the way . I am having extreme difficulty in finding the copper or brass tubing. Can I politely ask that you supply me with the exact measurements Outside and inside diameters I have been searching for 1.0 mm internal diameter And 1.5 mm internal diameter. Tubing. Also I have been telling possible suppliers in China I have approached that the smaller diameter must be able to slide inside the larger. I hope you can help Kindest regards Keith . P.S Unfortunately the link you sent me did not work But sincerely thank you for trying.
Hi my friend. Try the link below I stated, is from Amazon. Come with all sizes. uxcell Brass Tube, 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm OD x 0.2mm Wall Thickness 300mm Length Seamless Round Pipe Tubing, Pack of 6 a.co/d/3Iz6EJI Sorry, the link I provided most likely mainly for Asean countries. That's why UK not able to purchase it. Reply me if u able to purchase the link I had share.
This DIY video is for the lantern Coleman generator needle. The purpose of the needle is to clean the nut hole, so that the gas able to go through. Hope I answer your question.
GREAT VIDEO THANKYOU!
U are most welcome. Thank you for dropping by.
Great video
Thank you so much.
Thanks for the great vid! I made a new needle rod tonight for my 200a and it's ready as a spare when I need one.
You are most welcome. So happy u have your own spare needle too now 👍🏽💕
Excellent presentation sir 😊.
Thank you so much, really appreciate that. 💕
Hello my friend I hope this finds you well.
As usual I am asking for help
Thanks to you I now have the brass tubing 😅
However again I need your help .
The wire for the jet is becoming hard to find in the UK .
GETTING 0.1 MM WIRE IS NOT A PROBLEM.
HOWEVER ITS TOO SOFT EVEN IF I ORDER HARD WIRE.
Could you please ery kindly supply a link for the wire you use .it seems stiffer than the 4 lots I have purchased.
Thanking you in advance .
P.S could you make a video on re coating the vent on a coleman northstar lantern
I believe its coated in Porcelain.
Lol just a thought
Thank you
Take care
Keith
Wigan
United Kingdom 🇬🇧
Thanks for reaching out. The link I provided most likely is for ASEAN region. I believe u able to get it in Ebay as I search & able to find it. The 0.1mm I'm using is softer than the original one, have to do it gentle so that to prevent breaking it especially when clamping the edge between the tube & the wire.
Awesome video for making your own generator needle. Have you found a way to make your own spring that the mesh and needle go on to guide it?
Thank you. I manage to DIY on coil spring for Northstar, the external spring not the internal spring. Shouldn't be a problem, just need different material to create one.
Where did you source the small brass tubing ? Can you get it in America or Canada ? Great video .
Thank you so much. I believe you can get it in America or Canada too. Try searching in Ebay key word "brass / copper mesh".
Available on Amazon too .
Nice. Thanks for sharing.
Do you sell generator needles ?
U would like to have which model generator?
@ 200 and 220 and don’t make the generator spring for them as well
Hello my friend
I hope you can help me
I am in the UK by the way .
I am having extreme difficulty in finding the copper or brass tubing.
Can I politely ask that you supply me with the exact measurements
Outside and inside diameters
I have been searching for
1.0 mm internal diameter
And 1.5 mm internal diameter. Tubing.
Also I have been telling possible suppliers in China I have approached that the smaller diameter must be able to slide inside the larger.
I hope you can help
Kindest regards
Keith .
P.S
Unfortunately the link you sent me did not work
But sincerely thank you for trying.
Hi my friend. Try the link below I stated, is from Amazon. Come with all sizes.
uxcell Brass Tube, 1mm 1.5mm 2mm 2.5mm 3mm 3.5mm OD x 0.2mm Wall Thickness 300mm Length Seamless Round Pipe Tubing, Pack of 6 a.co/d/3Iz6EJI
Sorry, the link I provided most likely mainly for Asean countries. That's why UK not able to purchase it. Reply me if u able to purchase the link I had share.
Ada cawan SELAM di situ.... 💪💪💪
Cawan limited edition, perlu tunjuk sikit. 😁😍Wow, Abg Bob 1st person notice. Power. 💪
Kemon 💪💪💪
Terbaik
What is this for please help me
Terima kasih sangat. 💕
This DIY video is for the lantern Coleman generator needle. The purpose of the needle is to clean the nut hole, so that the gas able to go through. Hope I answer your question.
@@SnowMakerTV I sorry I said please anyway I understand a little more