Refurbishment of Delphi Bosch Ford DI Injectors ( All original parts re-used )

Part 2: Refurbishment of Delphi Ford Transit DI Injectors,
Subscribe and Comment “winner” to be put in a draw to win a free fully refurbished Transit TDDI injector

[@pahofilmsnz]

Exactly what I was looking for. Cheers from NZ

[@kaloqngeorgiev1409]

Exactly what I was looking for my ford! Good video , man !

[@charliematt4808]

Well done. Thank you. You may have saved me hundreds, I’ll find out in a week or so when I referbish mine.

[@Rustleinthebushes]

Thank you so much for the positive feedback ,
Glad I am able to help within video form

[@ericind3692]

This is just what I need to know, my ford transit had a blocked injector and this video help me to get back on the road. Thank you from Tasmania Australia. Can you supply a full list of all the parts in the injector, eg: shim on the top of the spring to adjust the run pressure, the injector seal washer, is there a screen filter insert in the top of the injector also?. what about the two seal washers for the return bleeder tube as well. Can you also suggest where to get these parts from here in Australia. Regards Eric

[@jeffbrown6880]

Fantastic video with the detail required to actually do this myself. Well done.👍

[@Rustleinthebushes]

Thank you so much for the positive feedback and glad the video can help save ££ 😎

[@rogerferris3720]

Excellent job, I had a go at refurbishing mine a few months ago. Got them working better but, they weren't as good as yours.
I think after watching this, I'll have to give it another go.
Cheers and all the best from Cornwall.

[@Rustleinthebushes]

Amazing feedback
Thank you so much , Im happy you found the video useful and and glad it has enabled you to give them another go 😎

[@epifaniohenriques6079]

my car is stoped because i dont know what is the pressure of this injector, please help me.

[@davidclarke9245]

Where did the little washer go you said not to reuse. I didn't see u re fit a new one. I put some good diesel out out a dirty barrel and got oil substance coming from injector rubber. Am I best changing the rubber seals or going full on injector clean. I'm not a mechanic nor do I have a sonic machine u cleaned them with

[@patrickmurphy1654]

Good job well done; did you replace the washers on the tips for reseating these as mine are crap also if you did where can you buy them from?

[@Rustleinthebushes]

Hi Patrick
Thank you for the positive feedback .
I replaced the washers with steel washers and I purchased from Peugeot , call them and ask for steel HDI injector washers, cheaper than fords

[@patrickmurphy1654]

Thanks for your replies,I had my injectors rebuilt by a company up north but i didn't reseat them and now runs a little rough .@@Rustleinthebushes

[@ericind3692]

Yes I did and got them from peps auto parts for around $20 per injector. You get the seating seal for the injector and also both seal washers for the return line fitting as well.

[@fifflepede]

Spot on mate, thanks for sharing. What liquid do you use in the sonic bath?

[@Rustleinthebushes]

Afternoon thank you for your kind comment I use carbusonic EB24R on Amazon , it’s £15 for 1 litre but you add it to 10litre of water ,
It’s good for engine parts and aluminium safe too

[@fifflepede]

@@Rustleinthebushes nice one thanks, I'll have a look at that

[@epifaniohenriques6079]

very good, but i d´like know what is the pressure this injector?

[@Rustleinthebushes]

Hi There thank you so much for your comment,
These injectors are from a 90ps van but are used up to 115ps
I hope this helps

[@Rustleinthebushes]

2000 PSI MAX OPEN PRESSURE

[@vxcav]

what's the difference between Delhi EJDR00502Z and the EJDR00401Z injectors.

[@Rustleinthebushes]

Hi and thank you for the comment , as far as I’m aware they are the same injectors , marked up different as one is for transit and one is mondeo but interchangeable.

[@vxcav]

@@Rustleinthebushes That's brilliant buddy cheers for the quick reply.

[@pierrevandeputte2543]

These injectors aren't checked on a benchmark.. They runs, but not optimal.. The test on a special bench, create a C2I code, written on a ring around the head.. That needs to be written in the engine processor to make it run better..

[@Rustleinthebushes]

Thank you for you feedback , this video is ‘how to refurbish injectors’ and not ‘how to bench test injectors’ and what your saying is not true . These are bench tested but not in this video, Mechanical injectors that can be adjusted within the software , they run on a mechanical fuel pump

[@pierrevandeputte2543]

@@Rustleinthebushes OK... I have refurbished my injectors common-rail delphi, but not checked them on bench.. So there is excessive backflow and consumption, who make a default "leak of pressure" at full power... Thank's for your answer..

[@epifaniohenriques6079]

i m from angola- luanda in africa, here is complicate to find people that know about the pressure this injectores.

[@DavidJones-wq5fx]

TH-cam is the best teacher

[@cesarjorgemurillobarientos1813]

Very good master

[@Rustleinthebushes]

Thank you so much for the feedback good sir, much appreciated

[@slobodanmasce2959]

I need two injectors no. 1213488 for ford transit 2,4 di year 2003.

[@slobodanmasce2959]

Meni trebaju dvije dizne broj 1213488 za ford tranzit 2,4 di god 2003.