there is so much collar to spare on this beauty that even if the handle broke in the field you could handily wield the head by itself for roughing out a new handle. thank you for the video, beautiful work!
I just found this channel not too long ago, but I love these videos. Forging and wood word look like they are two of the most essential skills to have after farming or hunting. This makes me want to get into it.
Mr. Olgren, Outstanding job and craftsmam ship on this bearded axe! I myself have tried to do this a handfull of times with very little success...to say the least. However, owing an axe such as this would inspire me to keep trying and NEVER give up! Once again - outstanding job...greetings from South Texas!
Beautiful! This is the 3rd of your videos I've watched tonight and the 2nd one was actually your older video of you making a the same kind of hewing axe. Its awesome to see your craft develop from then (arguably still an impressive piece) to this masterpiece
Very nice. Its such an effective tool also. Its very interesting these tools that were specially made for the tasks. The felling axe the made for the project with Södra Råda Kyrka is another interesting piece specially made to purpose.
Top video, enjoyed watching all the pieces being made then brought together for the final welding, great stuff 👍. The handle fitting was very nicely done as well. Regards from Down Under.
Love this! I got something similar? Found it at an antique shop? Nice to know how it might of been made? It has the strike plate on the back of the axe. Which can be used as a field anvil if needed? Love the axe!
I've never understood why welding takes light hammering at first rather than as hard as possible hammering. And why welding 2 different steels is the easier than 2 of same.
The light hammering is to set the weld so the pieces won't move around. If you hit loose pieces that haven't started to weld hard they will shift and things won't line up properly. Also it isn't really that two different steels are easier to weld than two of the same, it is that some steels accept welds easier than others. Mild steel is cheap and available in a wide variety of shapes and sizes, and absorbs shock quite well, so it was often used historically for the body of axes (it is still cheaper today, but the price difference between higher carbon steel suitable for an edge and mild steel has come down enough that the labor savings of making an axe in one piece is worth the extra material cost and bit of shock resistance for mass production), but mild steel doesn't weld easily. Higher carbon steels useful for edge steel will weld more easily, so inserting a sliver between the two sides of a folded axe with a mild steel body will make that weld easier than mild steel on mild steel, but if you make a folded axe entirely out of high carbon steel (or at least the simple ones that weld easy) there is no benefit to putting the shim of a different steel in between the sides of the folded piece as far as welding difficulty is concerned (you also don't need a separate piece of edge steel, because it is all suitable for an edge).
Hej! Jag bilar timmer. Har en 6-7 bilor. Den ni gjorde i denna video ser exakt ut som den jag vill ha. Möjligtvis ännu mera båge på skäret. Kan skriva mycket om det men vill bara fråga. Kan ni göra en sån till mig? Betalar det som det kostar. Likadan men med lite mera sväng i skäret. Vill ni kolla min favoritbilder så kolla följande länk: Hewing yet another log th-cam.com/video/kryKHGwPFw4/w-d-xo.html
In most cases you would want to split one piece or the other with a hot cut to form a V shaped groove and forge the other one into a taper that slots into it to double the surface area of the weld, but that wouldn't really work for this particular type of specialized axe. A hewing axe is a specialized type of axe used for squaring up logs so that they can be stacked more easily and with smaller gaps, in order to do that as effectively as possible hewing axes usually have an offset eye so that the edge can closely hug the flat surface you leave behind where you are working. Hewing axes in general also often have a single bevel (like most wood chisels, rather than a double bevel like you would see on most knives and axes) for the same reason, although this particular style of hewing axe typically doesn't.@beans1557
there is so much collar to spare on this beauty that even if the handle broke in the field you could handily wield the head by itself for roughing out a new handle. thank you for the video, beautiful work!
man that axe looks gorgeous!
Absolutely wonderful job. Beautiful tool.
Great video. It was a pleasure working with you!
Beautiful design. Keep up the great craftsmanship and hard work my friends. Forge On. Fab On. Weld On. Keep Making. God Bless.
Very impressive build, amazing quality. Thank you for taking time to build, film, edit and post this video.
Ja det var verkligen häftigt att se ert arbete med att smida en sådan bjässe till timmerbila! Bra jobbat och trevligt samarbete. 👍👌💪
I just found this channel not too long ago, but I love these videos. Forging and wood word look like they are two of the most essential skills to have after farming or hunting.
This makes me want to get into it.
Crazy cool axe. I need to find videos of that style being used now to see it in action.
Another excellent video! Thank you!
Decent that thing is brutal you guys did a beautiful job. And the amount of forge welding is mind blowing thanks for sharing.
Amazing work man! That's some next level forge welding 💪🏻💪🏻
Thanks man!
Mr. Olgren, Outstanding job and craftsmam ship on this bearded axe! I myself have tried to do this a handfull of times with very little success...to say the least. However, owing an axe such as this would inspire me to keep trying and NEVER give up! Once again - outstanding job...greetings from South Texas!
wow I love it
I find forge welding very interesting to watch. I could watch for hours.
Nice to see that you used the traditional construction techniques.
Beautiful! This is the 3rd of your videos I've watched tonight and the 2nd one was actually your older video of you making a the same kind of hewing axe. Its awesome to see your craft develop from then (arguably still an impressive piece) to this masterpiece
Very nice 👍. I have long wondered how these were constructed. Thank you.😊
Wow, that turned out amazing!
That looked like a ton of work, but the result was worth it, great job!!!
It sure was! Thanks
Very nice. Its such an effective tool also. Its very interesting these tools that were specially made for the tasks.
The felling axe the made for the project with Södra Råda Kyrka is another interesting piece specially made to purpose.
Beautiful work! ❤
I have four original axes in that model at home, but have not yet tried them out!
That must be ferocious metal moving to make you use a power hammer. I'd love to work with that ax.
Great Axe! I was surprised by the one sided lap weld for the bit.
I have made a fullering tool out of ship anchor chain and I have made a cupping tool out of mild solid square stock 😊
What about an 750 axe???
Like trully badass vikings axe???
The axe looks awesome, great job!
Thank you!
Amazing work 😎🥰 forge welding is a great skill 👌
Top video, enjoyed watching all the pieces being made then brought together for the final welding, great stuff 👍. The handle fitting was very nicely done as well. Regards from Down Under.
Fantastic guys 👍
Awesome axe, awesome video my man
Great work dude. I appreciate your talent.👏👏
Thank you!
Very cool!
Thanks
Love this! I got something similar? Found it at an antique shop? Nice to know how it might of been made? It has the strike plate on the back of the axe. Which can be used as a field anvil if needed? Love the axe!
Потрясающая работа 👍
Most excellent. What is the name of the book you mention that was studied before making the axe?
Beautiful 👍👍👍👍👍
This axe will be my Everest.. 🍻🍻
veeeeery nice
Great video, thanks for sharing! I definitely want to try that in the near future. One question is it single bevel or double bevel?
Double. Single bevel hewing axes are not very common in Sweden.
just wnanted to say I just came across your videos and I absolutley love it.Just because of the pic behind you of arnold....I"LL BE BACK!!!!!!
Hello I apriciate your efforts your a very handy man can you tell me how you started blacksmiting
Do double edge like that but one handed wield
Thích xem a. Khi a làm xong dụng cụ thì nên tes công dụng của nó sẽ hấp dẫn hơn
Top show old man. The axe looks bonza.
A difficult build. Good job!
Thanks!
👍👍👍
Nästan en Järnbjörn! 👍👍👍🪓
Wow whery god woork 😊
I liked your big ax viking.
Give us the name of that book Nick!
Beaitiful!
Harbor freight anvil!……..how do you like it?
I've never understood why welding takes light hammering at first rather than as hard as possible hammering. And why welding 2 different steels is the easier than 2 of same.
The light hammering is to set the weld so the pieces won't move around. If you hit loose pieces that haven't started to weld hard they will shift and things won't line up properly. Also it isn't really that two different steels are easier to weld than two of the same, it is that some steels accept welds easier than others. Mild steel is cheap and available in a wide variety of shapes and sizes, and absorbs shock quite well, so it was often used historically for the body of axes (it is still cheaper today, but the price difference between higher carbon steel suitable for an edge and mild steel has come down enough that the labor savings of making an axe in one piece is worth the extra material cost and bit of shock resistance for mass production), but mild steel doesn't weld easily. Higher carbon steels useful for edge steel will weld more easily, so inserting a sliver between the two sides of a folded axe with a mild steel body will make that weld easier than mild steel on mild steel, but if you make a folded axe entirely out of high carbon steel (or at least the simple ones that weld easy) there is no benefit to putting the shim of a different steel in between the sides of the folded piece as far as welding difficulty is concerned (you also don't need a separate piece of edge steel, because it is all suitable for an edge).
@@coopercummings8370 wow, excellent explanation thankyou. It all makes sense now.
Очень хорошая вещ'а у кого были такие топоры не разу не видел' как его можно использовать?
I wish that ax was mine
Do you sell your axes somewhere?
Нигде невидно добавки флюса при сварке' или вы не добавляете при сварке флюс?
Looks like the Executinors axe
👏👏👏👏🤜🤛
Le pongo un asta más larga y es una hacha danesa.
very interesting... good stuff, show us more please... your enlish is very good too!!! just sayin'.
;'0/
M
Hej! Jag bilar timmer. Har en 6-7 bilor. Den ni gjorde i denna video ser exakt ut som den jag vill ha. Möjligtvis ännu mera båge på skäret. Kan skriva mycket om det men vill bara fråga. Kan ni göra en sån till mig? Betalar det som det kostar. Likadan men med lite mera sväng i skäret.
Vill ni kolla min favoritbilder så kolla följande länk:
Hewing yet another log
th-cam.com/video/kryKHGwPFw4/w-d-xo.html
How much would I like to use that axe? 🤤
,,Eine Frage, bitte; warum habt ihr den schwulen Bodybuilder an der Wand?"
,,Warum?"
Feel free to inform me otherwise, but that seems like the weakest way of joining the blade to the rest of the axe.
In most cases you would want to split one piece or the other with a hot cut to form a V shaped groove and forge the other one into a taper that slots into it to double the surface area of the weld, but that wouldn't really work for this particular type of specialized axe. A hewing axe is a specialized type of axe used for squaring up logs so that they can be stacked more easily and with smaller gaps, in order to do that as effectively as possible hewing axes usually have an offset eye so that the edge can closely hug the flat surface you leave behind where you are working. Hewing axes in general also often have a single bevel (like most wood chisels, rather than a double bevel like you would see on most knives and axes) for the same reason, although this particular style of hewing axe typically doesn't.@beans1557