Building a $4000 Showcase NZXT H9 Flow Build + Giveaways (Ryzen 7900x / RTX 4090 FE)
ฝัง
- เผยแพร่เมื่อ 5 มิ.ย. 2024
- Get a Windows 10 Key for VIP-cdkdeals and use code RBCK for 30% discount
- Windows 10 Pro ($14.64): biitt.ly/SjaKX
- Windows 11 Pro ($20.36): biitt.ly/H2sdR
- Microsoft Office 2021 ($46.96): biitt.ly/Muliv
CPU: AMD Ryzen 9 7900X - robeytechdeals.co/43w2jiM
Thermal Paste: Noctua NT-H1 - robeytechdeals.co/3oVFpCy
Cooler: NZXT Kraken Z73 RGB - robeytechdeals.co/3WYUoYV
Motherboard: NZXT N7 B650E - robeytechdeals.co/3Cgqjuu
RAM: Kingston FURY BEAST 6000MHz 32GB - robeytechdeals.co/3P4P7xe
Storage: Kingston FURY Renegade 2TB NVMe SSD - robeytechdeals.co/3CkHlYw
GPU: NVIDIA RTX 4090 Founders Edition - robeytechdeals.co/3TdC23k
Case: NZXT H9 Elite - robeytechdeals.co/3CJXWp8
Case Fans: NZXT F120 Duo 3 Pack - robeytechdeals.co/3Zyrxf8
Case Fan: NZXT F120 Single - robeytechdeals.co/3H0yG0w
PSU: NZXT C1200 Gold - robeytechdeals.co/3XmOsrG
Extensions: Asiahorse Purple - robeytechdeals.co/3GYWLVp
Looking for our merch? Check out www.robeytechstore.com
Want the latest info on GPU availability or tech deals? Check out www.robeytechdeals.com
Subscribe: robeytechdeals.co/RobeytechSu...
Check out my Top Videos: robeytechdeals.co/TopVideos
Follow me on social!
@Robeytech - Twitter
@Robeytech - Instagram
@Robeytech - TikTok
@Robeytechdeals - Twitter
Facebook.com/Robeytech - Facebook
Twitch.tv/Robeytech - Twitch
/ discord - Discord
Want to support? Robeyone use the below affiliate links when you shop at:
Newegg - robeytechdeals.co/Newegg
Amazon - robeytechdeals.co/Amazon
Best Buy - robeytechdeals.co/BestBuy
Here are tool recommendations, for building a PC
Newegg:
iFixit Manta Driver Kit - robeytechdeals.co/3qTrTxv
IFixit Pro Tech Tool Kit - robeytechdeals.co/3qTdYHG
Zip Ties - robeytechdeals.co/3nT3pSW
Wire Cutters - robeytechdeals.co/3nQbF6r
Velcro Ties - robeytechdeals.co/3FTVmeW
Build MAT - robeytechdeals.co/BuildMat
Goo Gone - robeytechdeals.co/3tR0Btq
Amazon:
IFixit Pro Tech Tool Kit - robeytechdeals.co/32tehQa
Zip Ties - robeytechdeals.co/3tOhSDD
Wire Cutters - robeytechdeals.co/3rKpRPf
Velcro Ties - robeytechdeals.co/3KxoSLb
Goo Gone - robeytechdeals.co/3FUvb7N
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting Robeytech so I can continue to provide you with free content each week!
#NZXT #H9Flow #Robeytech
About Robeytech:
Justin Robey (Robeytech) is gamer and tech focused streamer that hosts weekly shows dedicated to building PC's and the latest tech news! Justin, a tech-streamer and TechTuber builds custom PCs, and produces how-to-build tutorials, tech information, and tech news videos on TH-cam. Robeytech, is dedicated to gamers and fans who want to hang out and talk about games and tech, plus have fun as they journey across the infinite gaming content and learn about building awesome PCs
Building a $4000 Showcase NZXT H9 Flow Build + Giveaways (Ryzen 7900x / RTX 4090 FE)
[Video URL]
Robeytech
/ robeytech
00:00 Start
18:58 Parts Overview
33:00 Case Breakdown
43:08 CPU Install
47:29 M.2 Install
50:43 RAM Install
53:53 AIO Prep
1:10:46 Motherboard Install
1:18:10 Front panel connectors
1:25:22 AIO Install
1:49:30 Cable Management
2:04:30 PSU Install
2:31:19 shhhhhhheeeeeeeeeeessssssssssshhh (PC post)
:38:41 Cinebench R23 - วิทยาศาสตร์และเทคโนโลยี
For everyone wondering, he's using an Nzxt V2 rgb/fan controller. It supports 6 Rgb connections and 3 fans connection but can support up to 9 fans with 3 way splitters. As for the 7-10 rgb connections and 10th fan connection, you would either need another V2 controller or if you buy the 3 pack duo fans, they come with a small rgb controller which has 3 Rgb connection with a splitter option for fan power otherwise you would just plug the other fan power connectors in to the motherboard fan headers. Nzxt rgb fans have proprietary rgb connections, so you need their controller unless you have an nzxt motherboard that has rgb connections for their fans
I would love to see a video of how you connected all the fans to the hub, because thats alot of fans and some clean management.
Same!
!
wuu7
Same question. I have the same hub, case, cooler and fans. About to start building.
@@tritontr21what hub is it bro? I want this build bad
I saw that you installed the top radiator. Is it possible to install it at the front with the radiator oriented so that the pipe connectors are at the bottom, or is the case too big?
gona get this exact build for my next pc
Ha, looks exactly like my Lian Li O11 Evo... although I have 15 fans counting GPU and 40mm, 60mm on the HDD bracket in the rear. Went with an Artic Freezer II and stuck with Artic ARGB PWM fans except for Noctua in the rear.
Do you need a special bracket for am5 and the z73 kraken? I actually just ordered those two
I asked about air cooling my 7900x and everyone was saying no, well my dragon build is finish and i air cooled it anyways and did a 10 min cinebench r23 and scored 28951!!
So these are good for just audio? I don’t plan on using the microphone on the headset and using my desktop microphone as a mic
Hmm any thoughts on the placement of the AIO if it were on the side as an intake instead of up top? Curious how thermals might be if one had the AIO as intake on the side, intake fans on the bottom, and exhaust fans on the top and rear.
Well heat rises so you would think mounting a 360mm AIO to the top would be preferred
Can the top glass lid of the h9 elite fit on the top of the h9 flow? Are they interchangable?
how did you connect the fans and how many interfaces did you have to use to connect the 7 case fans?
Fan hub
I am very curious on how you would install a GPU sag bracket in the case with the bottom fans I’m asking because I would love to do this build
You can mount a "gpu brace" using the rear brackets of the case.
Hey @RobeytechLive! Thanks for the great video! I'm building a PC for the first time on my own and actually wanted to do a similar setup. I was planning to install 10 fans total: the 3 AER RGB 2 fans on the radiator on the top of the case and 7 more F120 RGB DUO ones (3 on the side, 3 on the bottom and 1 on the back). I think it's exactly what you used, but I'm not sure. Any chance you could specify what fans you used and the way you connected all of their cables? This is the part I'm struggling with in my build... I saw you used the new RGB & Fan Controller V2, but it would not allow the connection of all 10 fans if I understand correctly (it should technically support only 6 DUO fans for lighting control, as they are not daisy-chainable, and up to 9 fans for speed control, if using the triple splitter cables). So where did the remaining cables go? Hope you will be able to reply, as I have no idea how to connect them and if I would need to use additional controllers/hubs/cables to be able to actually control them all via the CAM software. Thanks a lot in advance!
hello, have you found a solution to your problem? I have the same problem too. thank you
@@myl0o46 Still hoping they will answer.... The simplest way that comes to mind would be to connect the remaining rear fan directly to the motherboard to an ARGB header and a fan header. If I'm not mistaken the Kraken Z series he's using comes with a cable and a port on the pump itself for ARGB connection, so the 3 daisy-chained AER RGB 2 fans mounted on the radiator could be connected directly to the pump for lighting control. The rest of the connections would be as I described in my original question, that is: 6 F120 RGB DUO fans connected directly to the RGB & Fan Controller, 3 of which would be connected along with the 3 radiator fans via double splitter cables for speed control. I only wish someone could confirm that such cabling would actually work and permit you to control everything (fan speed and lighting) via CAM... Hope it helps.
@@sydoc Hey, I've been trying to figure this out for a while too. What I am thinking is the rear fan RGB cable is connected right to the motherboard. Since it is a NZXT motherboard you can control it through NZXT CAM along with everything else. If you look at 1:52:00 where he puts the flashlight on he talks about connecting the last fan. I checked their site and that header he plugged into is RGB. I don't know if we can run that 7th fan if not using the NZXT board. My thoughts were to run 2 140 mm duo fans on the bottom although I don't think that will look as good. Hopefully they can confirm this! Good luck with the build!
@@sydoc what did you end up doing. I have this exact setup minus the Nzxt mobo. About to start building.
Hello. Please make a video in detail about how to connect 10 x 120 nzxt duo fans.
Wiring with hub question. I have the same fans, Hub and case. How did you wire the fans and its RGB? Did they all plug into the hub? Or did the cooler fans/RGB run off of the pump and to the mobo?
Did you manage to solve it?
@@MeborHud had to use two controllers and swap the fans on the AIO. For some reason these ass holes use a different fan for the aios. Makes zero sense.
which fans did you use for exhaust?
This is a great performance platform for some business and especially gaming. Keeping the heat out is key.
In the engineering world we get into some pricey en-devours. Gaming performance is different than CAE and CAD.
I'll stick with Super Micro. They have always been the leading edge for supporting CAD / CAE. You'll spend up to 3 to 4 times for one of their highest end systems but when working for a living, I have always relied on their knowledge and ability. With some of the extreme CAD video cards now you can another $10k to the price tag.
A loaded Supermiceo SYS-7039A-I $15,134.25, for a NVIDIA Quadro RTX A5500 video card added another $4,248.40 for a total of $19,382.65. Add Ansys Multi physics with a Unigraphics NX now Seimens NX software package and the price is over $35K for a system.
So don't complain about sending $4k on a system.....
At 2:02:00 what cable is that? Considering it looks significantly different from the one that comes with the gpu?
It’s on the description
@@RobeytechLive Its not though you only have the extensions listed.
Another great build.
robey master keep it going brother
How did you connect 7 rgb fans and the aio to the controller? It only supports 6 rgb and the f fans don’t daisy chain?
The AiO has its own controller. Three fans actually daisy chain to that and then the one cable connects to one off the AiO. On the AiO they are AER RGB Fans different than the other fans.
is there enough room to do push pull+radiator at the top?
Yes
90 degrees on the CPU?!? Sheesh, that’s hot!!
That’s Ryzen 7000
Are 3 fans from side all connected to 3 ways splitter?
There is a hub and yes it has a three way splitter
How do I get an H9 Elite, its sold out everywhere?
does a lian li internal usb connector work with nzxt fans when using the nzxt cam program?
USB hubs are universal but you cannot plug the next fans into a Lian Li usb hub. It needs to go into a NZXT fan hub and then that hub can plug into any USB hub that you have regardless of brand. If you have future questions join my discord and ask there!
does a Kraken 360mm AIO good for a 7800x3d?
Isn't this case H9 Flow? I thought the Elite case only comes with vertical GPUs and you can't mount them horizontally
In any house you can put vga horizontally. You just need to add the bracket module.
37:02 is there an amazon link to that RGB HUB i wanna do this build with 9 fans and i read the controller the fans come with wont do
Find it?
@@RedCdot it comes with the case if you get all nzxt fans you can connect all them to the hub
Hi, does someone know the #Code for the standard lightning of the fans? It's not white its like a white blueish... Thanks for the help :)
I’ll side fan for 360 AIO + push pull
When is Phanteks NV7 video coming?
When it’s out 😀
@@RobeytechLive March 😭
how does he do the 10th rgb fan? i know the controller only supports 9 fans, and i would like to copy the configuration he uses for my own 10 fan setup! if anyone has a timestamp that would be great!
@@FreedomThroughDiscipline even with splitters it only can do 9, unless he has a triple splitter in there somewhere
do you think i can fit 2x 4090 in the case?
case fits around 430mm max gpu so fulll tower yes mid tower probably not since a 4090 takes up around 3-4 slots
@@aidentheriault2402 is the h9 a full tower?
@@techsquared_ its either a full tower or a mid-tower but I doubt a mid-tower can fit two 4090's the full tower definitely can. search up the dimensions of it.
Do you have (3) separate NZXT controllers for all the fans? How did you get the 10th fan in the chain?
Get a 10 or 12 port hub for your fan type. Don't use the included one.
Why is the 13900ks $700 and the 12900ks is $900?
I’ve got 80 max on my 5800x3d and you have 90 on a 7000 series……. What am I doing wrong lol
7000 series pushes temps on purpose to maximize performance. It’s part of the design.
@@RobeytechLive I know, I meant that you have a 7000 series which are known to be hot running at 90 and I have a measly 5800x3D that’s running at 80 almost at 90. Isn’t that bad that my 5800x3D is almost running at that temp?
Does anybody know but can the rgb hub connect up to 10 fans?(3 from the radiator)
Sooo cool.
guys that look amazingly ridiculously has been. Computing from the 20th century. Apple is the way to go haha
In garmany say! Billig 😂
Which has better thermals H9 flow or 5000D?
the 5000d actually has better airflow by a little but if ur going with an aio get the flow