Hey bro... Can a 5hp trademill DC motor be controlled with fan regulator? Of course by using bridge rectifier to convert AC to DC... please give a try... waiting for ur response...All the best
@@MrElectron plz help i have a sewing machine motor which when belted to sewing machine rotates very fast,so suggest a cheap controller so that to reduce its speed Plz rply
Bro. Can you check the maximum power that these controllers can take? I'm trying to build a 20* 60W bulb parallel circuit. I wish add this to control the light. But I'm confused wheather it can take the load? Or i should use 2 or more to reduce load on each controller. Please check and tell. Kindly mention the brand of controller you used. Thank you
sorry to disagree with you. this patent is not efficient at all, the minute you put load motor dies and won't keep rpm stable. it is very difficult working like that. i have seen some Russian guys buiding arduino that controls amperes and keeps stable rpm with various loads.
Hey Mr electron bro if you are unable to run sewing machine motor on 12v dc so either try to change the field winding with thick wire OR try to change the armature winding of motor and then try to run it on DC 12v
What is the watts of regulator? And IA it able to run for long time? Please tell me I have sewing machine motor and I used it for drill ,so please tell me 🙏
My washing machine motor is not selo only run fast when I purchased 500volt regulator but not working.when I slo demer then only viberat and then encres demer and oly run fast moter
Sir i am difficult in English so Sir what happens if jaisa ap o motor ko full speed mai run kiyea, inertia usko milgaya then ap jald hi knob ko low karde to sayed motor generator ki tarah thoda current and voltage genereate karega am i right?? Any damage will happen there or not??😀😊
@@mdfaisal216 because you are using the 75 watt controller. And motor is spinning without any load so the actual test will show you the motor driven by a mechanical load then test the controller with the load and check the results this controller you are using is not for more than 150 watt the controller is for 75 watt and the motor is 690 watt you are spinning the motor without the load that's why the motor is not taking actual weightage that you are thinking 690 watt is combined with the actual mechanical load got it
Hay man great work you doing there i wanted your help with project that I'm working on Can I get your email or contact so I can talk to you about that ?
Bro, it didn't work for me. I have a similar washing machine motor. When I connected the regulator and switched on the motor the regulator blew up 😁I predicted it before itself . How did it work for you, plz tell, don't try this at home guys, better buy a 2000 watt regulator.
BEST BATTERY CHARGER DIY VIDEO - th-cam.com/video/ZN3saILbYUw/w-d-xo.htmlsi=9_nLu0vKOqfn4zi_
*Join this channel to get access to perks:*
th-cam.com/channels/WFbPzBb7dCyCWuBA-DBrMA.htmljoin
*Mr.Electron Patreon's Page* - www.patreon.com/mrelectron
*Hindi Channel* - www.youtube.com/@Mr.ElectronHindi
*Alternator Channel* - www.youtube.com/@mrelectron_alternator
*Watsapp Channel* - whatsapp.com/channel/0029VaQmmRaFCCoWOf7huh3G
will it work with blender 1000watt ac motorr?
There is a high possibility of it getting damaged under load. So 'Not recommended'
Your video is good
Thanks
Your welcome
Can you make a video jigsaw machine
Where did you buy that speed controller?
Did you show your connection ?
Will it work by 350 watt fan regulator?
Very good 👍
Great
Hi friend,does washing machine motor use many watts when in slow speed?
What is the name of this piece and where we can order it?
Kind regards
can we control speed of capacitor start capacitor run motor through this regulator?
How long it's work...the control damage...
Can it control 500watt mixer grinder?
I will give that a try as well...
@@MrElectron thanks for taking my idea. Iam waiting for the video . 😇😇
Hey bro... Can a 5hp trademill DC motor be controlled with fan regulator? Of course by using bridge rectifier to convert AC to DC... please give a try... waiting for ur response...All the best
Can you explain in detail how to connect speed controller to motor
Thanks bro
Did you doubt this would work. A dimmer is a simplified governor switch that limits the power delivered to the load so of course it would work.
No but some of my followers doubted so i had to cleared that doubt
@@MrElectron fair enough.
Please make a real speed controller of a universal motor
Can you explain the wiring, it is connected to a capacitor and i see two wires, to which output are them connected?
I have a project to do and don't understand how to do it
It’s connected in series
so we can use these motors to convert a motorcycle to electric? do you have a project like this?
Plz run sewing machine motor on 12v dc supply
Just tested.. you can't run the sewing machine motor @ 12v ... U will need a boost converter or inverter to increase the Voltage
@@MrElectron plz help i have a sewing machine motor which when belted to sewing machine rotates very fast,so suggest a cheap controller so that to reduce its speed
Plz rply
@Skylar Beau no
@@MrElectron sir can I make a electric bicycle using sewing machine of 220v 0.5 amps plz reply sir
Bro. Can you check the maximum power that these controllers can take? I'm trying to build a 20* 60W bulb parallel circuit. I wish add this to control the light. But I'm confused wheather it can take the load? Or i should use 2 or more to reduce load on each controller. Please check and tell. Kindly mention the brand of controller you used. Thank you
Thanks
Hi can you help me with the wiring of a washing machine to ac im confused with connection there are 5 pins on my motor. It's from IFB
Try making your own universal motor and running it on 12v dc and 230 v ac!!
You tried on220volt AC how about 12volt DC did you tried? If so we like to see soon can this regulator run this motor on 12volt DC.?
You can't control dc motor using dimmer try pwm controller to control dc motor
Hello sir ilokrd your DIY washing mortor ol but can you teach me wheee to connect my capacitor? Tu
Will u pls state the power of regulator?
Can give advice bcz I installed 2000 watts speed regulator with grinder 1/2 hp motor
But while running motor is heating
sorry to disagree with you. this patent is not efficient at all, the minute you put load motor dies and won't keep rpm stable. it is very difficult working like that. i have seen some Russian guys buiding arduino that controls amperes and keeps stable rpm with various loads.
Hey Mr electron bro if you are unable to run sewing machine motor on 12v dc so either try to change the field winding with thick wire OR try to change the armature winding of motor and then try to run it on DC 12v
I was already a long time subscriber. ...but even after seeing this work, ...I still can't believe that it works.
It working
Adonde me conpro un control de esos
After load 6 amps that time fan dimmer damage I think it is working
Nice
nobody:
me : waiting for the motor to explode 😂😂😂😂
Thanks..
Motor no load par tha shayad isiliye kaam ban gaya, load hone par regulator jalega kya?
In early video 12 volt transformer from mixer in that video why we check pole ?
Send video link
DC or ac
Bro please run your sewing machine universal motor on 12v dc
Please run sewing machine motor on 12v DC
Please run sewing motor on DC 12v
Ha ha ha... 🤓🤓🤓 Ok sure sure Prateek.
Convert table fan single phase squirrel cage induction motor into bldc motor
Ok.. i will look into it.
What is the watts of regulator? And IA it able to run for long time? Please tell me I have sewing machine motor and I used it for drill ,so please tell me 🙏
My washing machine motor is not selo only run fast when I purchased 500volt regulator but not working.when I slo demer then only viberat and then encres demer and oly run fast moter
واو والله كفو
Hi sir no contest previous tow video watch latter so I miss pervious contest this video no contest @
Contest was there for my previous video and the winner was Julian's Lab
Contest will be in the upcoming video... This one was very short.
استمر في نشر الفديوهات
Areyou running it on AC or DC😦
I first tried it on AC and almost fucked up.. Thankfully my testing board has a trip switch
Sir i am difficult in English so
Sir what happens if jaisa ap o motor ko full speed mai run kiyea, inertia usko milgaya then ap jald hi knob ko low karde to sayed motor generator ki tarah thoda current and voltage genereate karega am i right?? Any damage will happen there or not??😀😊
isi tarikese 1 ghanta same motor calaye to heat nahi hogi na ...
Maine yek fan banaya hain ac motor of refrigerator, i gonna used potentiometer to control speed😀
I did not expect this kind of cable connection for someone called Mr Electron. Try to make it look better for the next video
It will not last longer bro
why ..need to know?
@@mdfaisal216 because you are using the 75 watt controller.
And motor is spinning without any load so the actual test will show you the motor driven by a mechanical load then test the controller with the load and check the results this controller you are using is not for more than 150 watt the controller is for 75 watt and the motor is 690 watt you are spinning the motor without the load that's why the motor is not taking actual weightage that you are thinking 690 watt is combined with the actual mechanical load got it
Hay man great work you doing there i wanted your help with project that I'm working on Can I get your email or contact so I can talk to you about that ?
Bro, it didn't work for me. I have a similar washing machine motor. When I connected the regulator and switched on the motor the regulator blew up 😁I predicted it before itself . How did it work for you, plz tell, don't try this at home guys, better buy a 2000 watt regulator.
You can't run anything with that engine.
Thanks