Just curious I dropped mine before I lowered it drove good I just test drove and the steering is stiff now and pulls all over the place just wondering if you had the same issue
You should have put more grease on the wheel bearings but other than that pretty good video does the truck still drive straight afterwards I'm wondering because I'm about to lower the front
I just installed 2in drop spindles on my 1999s10.... the dust shield wouldn't tighten up without adding washers.... then also I had to grind my passenger upper arm
I didn't do the rear on this truck since they brought it to me luke that. But he did say bump stops were removed for the rear drop. Recommend to get a c-notch since the axle still bumps the frame
@@Aguilar8567there are actually mounts for the bump stops welded to the frame. Cutting those off should allow enough space for the rear end to travel up
Thank nice bro got first one 5 speed don't nothing b this truck can see you vídeo got know want put it nice lol 😂😂😂🔥🔥🔥 tray got rim 18 or 19 no want spacer what pattern number rim can used can't be saint 5x4 .75 can work saint pattern
@@Aguilar8567 some body tell me you put 20 are rim heavy can mest the from take more gasoline thing it true what number pattern the rim saint are different pattern thank
Beautiful low rider truck!
Looking good man!
Just curious I dropped mine before I lowered it drove good I just test drove and the steering is stiff now and pulls all over the place just wondering if you had the same issue
Good job doing this one handed,lol. Thanks I learned alot
Appreciate it, its definitely not easy
Looks nice, what size are those wheels and tires? and what wheel is that?
I'll drop mine 4/5" very soon. Beltech lowering kid 616ND.
Don't forget to do a c notch
@@Aguilar8567 where can I get it???
If I'm not mistaken Beltech has them as well
🐆
Nice truck. What are the rims called? What size are they?
Thanks for the vid ima be doing my blazer xtreme
Nice bro looks sweet , but the knuckle is the same size it the wheel bearing shaft that is move up 2inch fyi
You should have put more grease on the wheel bearings but other than that pretty good video does the truck still drive straight afterwards I'm wondering because I'm about to lower the front
Nice truck
I just installed 2in drop spindles on my 1999s10.... the dust shield wouldn't tighten up without adding washers.... then also I had to grind my passenger upper arm
I also had the same issue with my upper control. A little grinding helped out.
@@mattcrowley3075what brand do u have ?
What size wheels do you have on it?
Did you have to cut the bump stops in the rear for clearance with the 4” drop?
I didn't do the rear on this truck since they brought it to me luke that. But he did say bump stops were removed for the rear drop. Recommend to get a c-notch since the axle still bumps the frame
@@Aguilar8567there are actually mounts for the bump stops welded to the frame. Cutting those off should allow enough space for the rear end to travel up
Did you have any turning issues with the spindles?
What size wheels and are you running adapters?
🏎👍🏾
So is the rear stock extreme or what
The truck was already lowered 4 inches in the rear, my friend wanted to drop the front so it could be leveled
What do have in the rear fam ?
Not my truck, but its a 4" drop in the rear
What size are your wheels and specs bro ?
It's not my truck, but I did a 2" drop in the front. It had a 4" drop in thre rear. I think it was a 245x35R20 for the wheels and tires
@@Aguilar8567 bet bet I appreciate itn
Thank nice bro got first one 5 speed don't nothing b this truck can see you vídeo got know want put it nice lol 😂😂😂🔥🔥🔥 tray got rim 18 or 19 no want spacer what pattern number rim can used can't be saint 5x4 .75 can work saint pattern
What size rims?
Those are 20's
@@Aguilar8567 some body tell me you put 20 are rim heavy can mest the from take more gasoline thing it true what number pattern the rim saint are different pattern thank
@@angelgarcias8219 No te entiendo lo que estas preguntando
What size wheels are you runnimg?