HOW TO BUILD A ROBOTIC LAWN MOWER GARAGE

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ต.ค. 2024

ความคิดเห็น • 8

  • @dellki52
    @dellki52 4 หลายเดือนก่อน +2

    🤔hummm..you think this will work with the Yuka mammotion robo mower

    • @magicmortgagemike6226
      @magicmortgagemike6226  4 หลายเดือนก่อน +1

      I would put it on the charger and measure from ground to top of highest point and see if it’s within the height of the rock. It should fit

    • @lazyhexican
      @lazyhexican 4 หลายเดือนก่อน +1

      Ya Probably wouldn’t be great for Yuka unless you built in more height by adding a 2 x 4 on the base sideways with screws… I like this solution but I don’t like the price…

    • @lazyhexican
      @lazyhexican 4 หลายเดือนก่อน +2

      I do know Yuka docked on the charger is roughly 32” deep (front to back) and Yuka is 20.4” wide and 13” high..oops I guess Yuka is only one inch taller then Luba which is 12” tall…This might great if $169 is a good price. Luba is 27.2” Long and Yuka is only 25.5” long…

    • @dellki52
      @dellki52 4 หลายเดือนก่อน +2

      I ordered the bolder and I will let you guys know how it fits. Upon looking at Yuka's measurements it looks like it may fit, but a tight height fit.

    • @magicmortgagemike6226
      @magicmortgagemike6226  4 หลายเดือนก่อน +2

      @@dellki52 when you place it on the ground, you should be able to shave off up to the roof with a solar, but you can also elevate the front a little bit if it’s coming in short, maybe put a couple of flat rocks or something it’ll work out