Torch Work. (Old Footage)
ฝัง
- เผยแพร่เมื่อ 6 พ.ค. 2021
- I found some old footage from before I started filming things for YT. This was shot with my Phone camera at the time. Sorry for the bad quality but I think you still get the idea of what I was doing. For those of you that like less talking, this is a video for you. And those that like less music, well,... sorry about that. I hope you enjoy the video none the less.
This project involved separating these two parts that had been wedged on there really tight. Since We didn't have a vise to attach this to the table, It was quite the struggle trying to keep it in place. Once the Gas Axe was let loose on these parts, it was only a matter of time before they came apart. As you see in the video, I cut off as much as I could to access the inner threaded parts. This allowed me to torch into the material to make some relief cuts so the tension was loosened enough to remove. As I've mentioned before, I'm sure there are 100 ways to do this but I chose this one. Its not a "how to remove", Its a "how I removed it". Thanks for watching I hope you enjoy it. - แนวปฏิบัติและการใช้ชีวิต
![[ไฮไลต์] แบดมินตันชาย วิว กุลวุฒิ ไทย vs ฟินแลนด์ รอบแบ่งกลุ่ม | โอลิมปิก 2024](http://i.ytimg.com/vi/GIbeFO0tvnQ/mqdefault.jpg)
Thank you so much man! I work for a rail car company 10 hours a day doing what you do here and I spend my free time watching your videos. My wife can’t understand why I watch work after working. If she only knew how many times you have saved me time at work. Keep them coming brother. God bless you and your family!
Glad to help
$50 bucks for the hammer, and $2000.00 for knowing where to hit it! 😂 great job!
Not only a great craftsman, but the parts smell like mesquite when he's done! Thanks for sharing!
Well done! You saved those folks a pile of money in replacing that whole bearing whatever thing.😀
Love the channel, I guess a lot of it is because you seem like a very logical and legitimate person. Keep up the great work! And post more of course.
I appreciate that!
@Kasen Tony Definitely, I've been using flixzone} for since december myself :D
I could watch and learn from you all day and still have a lot to learn. You are definitely a master with the torch.
Unbelievable. Just love your videos. Can't wait for them. God Bless.
You, sir, are a man of incredible skills! I could watch your torch work all day!
I'm loving both the video and the music!! Thank You!! You do some mighty fine work sir!
1.3K+👍's up IC weld thanks again for taking us all along with you for the great show
wow, some oldie but goodie stuff....thanks for sharing and as always, we love you and your talent, cheers from Florida, Paul
" it was on there.." Yeah, I guess it was!! You're the man Issac , keep it up.
LOL......... True. I fully expected to hear Issac say "The struggle is real" at some point in the vid.
Looks like a unit from a top drive rotary drill rig! The bull gear and bearing and sub! Nice job!
You are a true master with that torch!!! 👍🇺🇸
Glad you posted this Issac. Enjoyed the music while it was playing, great learning tips and solutions for your work challenges.
Glad it was helpful!
love your problem solving ideas, which helps me as i weld as a hobby ... thank you!
Isaac Thankyou so much. Watching you work with your work area on fire figured if there was a fiery hell you would walk through it not noticing. There is no fiery hell as no Father would allow his children to be there any more than we would put a bad pet through that. A great man Lazarus came back from the dead and clearly had been ‘asleep’ and had nothing to tell everyone about.
Anyway seeing you work with fire amidst fire is hilarious and amazing to see what you bring out of it. Please keep your work going it means so much to us in adverse times.
Another stellar job Isaac. I love to watch you problem solve for yourself and your customers. You are quite of an important tool for field companies. Good job as usual. Since it was for a blasting company no one would have noticed if those batteries would have cooked off on the bottom bench shelf.
I was thinking same thing about batteries LOL!!
You are a true professional. I'm a tech Ed instructor and have learned much from your videos. You can never take away from experience.
Old or new, always a pleasure. 🇨🇦
another excellent job Isaac. well done young man.
Great fire works, I love the music that goes with it.
That was so much fun to watch!
Nice job. Your a surgeon with that torch.
Surely was on there,great job Issac !
¡Orale! I must admit, I was sceptical about using a fire axe on a precision- machined piece of metal. This cat isn't your garden variety repairman. He is a Wizard.
Good eye and steady hands, Love that type of work. I do it 8 hours a day. Can't believe I like watching you do it.
My wife laughs at me and asks don't you get enough of that. I guess I like to watch people that do it well.
Thanks 👍 That's funny because I do the same. I like watching Kurtis from Australia
@@ICWeld I watch both of you. All the best!
Great skill with fire wrench!
i would have probably told the owner of the hub to just order a new one, complete...too much hassles for me, lol loved how you did the removal! i will keep it in my memory bank...
Isaac, You amazing and a inspiration. Thanks
Brilliant, you have to have patience and keep at it , top job
Thanks for the video! When I do this type of removal work I prefer to air arc gouge. It's less heat better visibility and damage control over the traditional acetylene torch. Anyhow I like the Victor torch also! My favorite brand!
I like the dramatic effects of the lumber on fire.
Hard earned. Well done!
Very skilful job thanks for sharing 🇦🇺👍
Two thumbs up. That's a wrench!
Your a wizard Harry !!!
Rigid pipe vice XL would do the trick. I'm impressed with every video. Thanks for the content.
Thanks for watching!
Dude you're on fire!
That job comes under the heading of what an old friend used to say. We don’t ask it we tell it!👍
Every man has a method to his madness , Issac's comes out to a tee spot on , if not he works it out.,💪👍✌️🤙
well, except most people in parliament don't have a method to their madness
Very good job of making do with what you have on hand. My kind of work.
As always grate background music.
Man, that thing was a fight. I prolly would've wrapped a 2- or 3-inch ratchet strap all the way around where your sling was, then strapped it down tight to the table to try to get a good hit on that slug wrench. Great job as usual.
The torch master hard at work!
Work with him? I want him to adopt me......I sure hope all of his children take full advantage of their fathers abilities by following in his footsteps.
It’s not really like that man . If you watch any welders you’re going to notice nobody does anything the same. Everyone has their own way they may be similar but not the same for the most part. You can watch someone every day but you actually need to do it and figure it out for yourself.
@@Firebird400 But it obviously helps to have someone mentor you, most people aren't gonna just go out and tackle cutting something with a torch without someone showing them how to use it. Nice screen name by the way!
You make some beautiful cuts!
Great video and thanks for sharing! Stay Safe!
You saved them some $$$$$ for sure, Nice Job, See ya
Isaac, you are great to watch., i hope one day to meet you. All the best, Edgar
This man has been there done that
Just what I needed something good to watch, it’s 3:30am here in the UK and as usual I can’t sleep but after watching you belt hell out of that I’m now tired, great video. 💤 💤
Hope you enjoyed it!
Nice job getting that apart.
Parabéns meu amigo ótimo professor
Loved it!!
very cool.. nice work there,,,
He was never gonna give up, no matter what
hard job even for the hot wrench looking forward to more vids
You are sooooo hired
Nice work bro!!
👍👍👍 Impressive!
dig the music
I've used some big slugging wrenches in my time,but man that one is huge!
Best in the Business
Old or new great to see another amazing video
Glad you enjoyed it
Agree 100%
Makes you wonder how many customers have offered this dude a full time position
You are not too far from the truth. Ive been asked by two companies. haha.
Dang your good . Great video .
I can light a torch and get the mix right, but I'm pretty sure if I tried this I'd have the bench cut in two pieces before I was done.
seen my neighbor catch his garage on fire doing some first time cutting!!lol
I read this all in my head in your voice lol fml
Always a good job .. I like da smell of 2x4... good blessings... a'ho yea....
Holy crap that's a big piece of stuck together steel.
I try to learn more about used the torch. Can give me a tip. See you how work with the torch. You are professional.
No vice! Chain saw a big V out of a piece of lumber is what we do in the land “down under” crocodile Dundee woulda used an angry crocodile to clamp down on it....
nice fix, I will put the 9" slitting disc through stuff like that then poke around with the torch.
but you looked so young in that film
Nice job, it's very difficult to do that much cutting without damaging the important parts.
Cool
Car Battery's under the bench!!!
I was bit nervous watching those batteries under the table... Luckily this was not educational video in that sense... I have exploded two batteries into pieces... First time I learned not to make sparks and second time I learned that open flame is just as bad... Those batteries were fully charged - I guess these weren't. 😁
that was fun
You swing that Hammer like John Henry.
Your have Master journeyman written all over you sir
👍👍
You got the job done and I assume the client was happy with the results and you got paid. When it comes down to it as long as you got paid, and you didn't get hurt. It's a job well done.
I was glad to see you remember the first principle Get a bigger hammer
Idea, maybe a chain and boomer would have held piece to the table.
I hear your skills are needed on the I40 bridge in Memphis! Closed indefinitely for something you'd have welded up in a couple hours
Yeah, I saw that!
I was expecting a really large flat screwdriver to show up 😆
I was thinking he was going to weld a 8ft long square tube in there
th-cam.com/video/nDdv93R1jUE/w-d-xo.html 😂
I don't think they make cotter pins big enough for slotted nuts that size Isaac?😎lol!...Ooh, that's not what the slot is for?? My bad! Great video!
Don’t see you getting too many flashbacks. Hope you didn’t take too much damage.
The man can do eye surgery with that torch
You mean more art work!
fire lol
The magic of restricted expansion and free contraction. That and a big hammer.
HUH?
@@lawfulldick4158 when you apply heat with the torch, to the shaft, it wants to expand but is restricted by the outer component so it can only grow in length. When it cools however it contracts equally in all directions so actually shrinks breaking the bond. Rule of thumb is about .001" per inch of diameter. Taking material out of the center gives it more room to contract in the direction he wants.
I guess Isacc built up a good sweat on this job, start to finish, and didn't even burn the shop down.
Dude is a Jedi with that torch
You beat the shit out of that thing..Awesome
👍
Ahhh, yes...... the old... it can't be stuck if it's liquid method ^_^
Indeed it is! haha
Good job ! You can open a class !
TaDa indeed!
19:34 I thought my phone was ringing (I had headphones on). Had to check to make sure it wasn't.
Just think of the knowledge a person can get working with IC .
Wrap a 3" tie down ratchet around that big gear . Hooked to the end of table. And hit it hard.