My husband was a very handy man and could fix just about anything. Being alone now I was clueless when my water heater went out. I found your video and it gave me the confidence to try and restart it myself. So clear and precise. THANK YOU!!!
My husband flushed the water heater tank yesterday and had not been able to get it started again. I found your video and in a couple minutes we were back in business just like your video showed. Thank you Noe!!
Thank you!! You helped me get my water hot again! Also, great job on going straight to the solution without a lot of jibber-jabber in the beginning of the video. Much appreciated, Mr. Arriaga!
Thanks, I had the same problem I was out of hot water for three days too. I called Rheem tech support they sent me the instructions. thats when I made the video.
Very sensitive device. We were having a ceiling painted on the ground floor and the furnace fan pulled the vapors to the basement which locked out the gas valve.
You are amazing!... we are at a cottage in Canada for a long weekend and found the water heater not working on the Friday night.. Panic setting in.... found your video, I had the same 7 light flashes... I followed your instructions exactly.....and now I have hot water for the family!! Thanks so much Mr Arriaga
Thank you so much!! After taking a very cold shower this saved my whole family!! Love your video, very detailed, love how you keep it sweet and short, straight to the point!! Thanks a lot!!!
This video just saved me $3300 per a contractor’s suggestion that I replace my semi new water heater. It was giving me the same 7 blinks and 3 second wait and I knew that I shouldn’t have had to buy a new one so soon. Thank you sir for posting this. I followed the directions exactly as the video instructs and it worked for me. Can’t wait to take a hot bath this evening.
Just had this situation this morning. I was really concerned when I read the words Flammable Vapor Shutdown. Really appreciate the tutorial!! Water Heater started up like a champ. THANK YOU!
Thought i was having a wave of bad luck. First was my LG fridge which broke down after 4 years only.!. Then the same water heater as yours did not churn out hot water. Thought it broke down too after 3 years. So happy that you made this video. Its perfect now. Thanks a million.
My FVS failed because I painted in the basement next to the water heater and I used a lot of mineral spirits next to it. I didn’t know chemicals affected these heater. I gave an AO Smith. I didn’t replace the FVS, I just turned the temperature knob four or five times and the heater kicked on. Without watching this video I would have waited for a service tech to come over three days later. Thank you for this video.
Thank You so much for this Fantastic Video!! We have a 55 and older community here in Connecticut that we just finished building 2 years ago and these places are Beautiful! Last week we experienced a rainfall here unseen in many years, 14 inches in less than a week! Water backed up in several of the basements that effected our hot water heaters. I called text support but could not reach anyone so I found your video and watched it. You did a Great Job explaining everything, and it worked!! You saved me $5000 which is the cost of 4 heaters plus tax AND the labor to install them!!! I can not Thank You enough Bro, Keep up the Great Work!!!
My plumber wanted me to buy a new water heater last Friday after he couldn't resolve this exact same issue. I saw your video Friday night, followed your instructions on Saturday morning, and left a message for the plumber that I didn't need a new hot water after all on Saturday afternoon. You saved me over $1,000. THANK YOU!
You just saved me over a 1000 dollars on a simple fix. Casteel wanted me to replace two parts, order and buy them myself after waiting DAYS for my first appointment and wait more for them to charge me 475. to install. I believe I triggered the problem when I tested my circuit breakers when I installed my AC thermostat that needed to be replaced.
The reset only helps you heat up some water temporarily. You still have to check the part. There's a reason that it's shutting down. And it's dangerous not to have a check by professional.
Thank you so much for your tutorial. You are helping so many people. I just bought house after a week. Boiler wasn't working and I was frustrated and your tutorial has helped me to reset the boiler. Now no need to go other place to shower. May God bless you and prosper further.
This worked when our water heater went out after floors were refinished (small house, oil stain and polyurethane - lots of fumes). Pilot shut off, 7 blinks. Our valve is just like this (no obvious way to relight the pilot). Thanks for the fast and easy fix!
Awesome video, thank you so much! I'm in a rental property and and landlord said to just unplug it and plug it back in after 10 minutes. I have been without hot water for a better part of the day. This totally worked in one minute. I heard the water heater fire right up 🙌
I came home dirty from a long day of work. I was ready to clean up and relax when I bumped into this issue. Thanks to you and this video I can enjoy the little things in the life that make the biggest difference!!! Thank you so much!!!!!!
Best video on how to fix this know issue I have ever found. Believe me I have searched for it to fix my water heater MANY times. Well done and simple directions. Thanks!
This was an exact replacement for the old one that lasted about 10 years. th-cam.com/users/postUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh The top of my mitigation tube by my roofline was just a 90 elbow which allowed too much debris to fall down into the fan, eventually ruining it. Without this issue, I bet it would have kept running another 10 years. When I replaced this fan, I added an extra elbow joint so the top tube now it does a 180, which should solve that problem. The radon guys around here wanted to charge me a $300 diagnostic fee, then parts/labor (probably close to $600 total). I installed this all by myself in about an hour for the cost of the fan; it would probably be even easier/faster with two people. FYI the manufacturer's warranty greatly differs depending on whether you install it yourself (1 yr warranty) or have a licensed installer do it (10 yrs).
Thanks a million! Hurricane Isaias put 5" of water in our basement and our Rheem pilot wouldn't re-light. This was exactly the fix! Looking fwd to a warmish shower for the first time since Monday night!
Thank you sooo much for putting this video out!! My in-laws water heater stopped working and it had the exact same 7 flash error code which the manual said was the vapour sensor. I replaced that but it still would not fire on not matter how many times we tried. That trick about rotating the temp dial 7 times fired it on immediately!! Thank you again soooo much.
Worked like a charm. Nowhere else could I find anything on cycling the control from low to high seven times after replacing the vapour sensor. Thank-you sir!
Wife yells out from the shower "there's no hot water!" The water heater threw the seven blinks error code and alerted me to a gas leak thank God, so fixed the leak, reset the gas valve after watching your video, and mamma's happy now...
Thank you!! Worked like a charm! Had a replacement part ordered which wasn't going to be here for a week. I too appreciate you getting to the point. :)
Thank you! I replaced the sensor and when it was still flashing I began calling HVAC because I didn’t know what else to do. I’m glad they didn’t have any immediate openings so I could find this video. It worked like a charm!! You just saved us at least $90!
@@mrnoe67tiktok i commented to soon. it went down again. had to replace the fvs sensor. but used the reset after replacing the sensor. your vid was still very helpful. thx
Thank you sooo much for your video. I finally can take a warm shower without having to call a service guy to come and fix it. You safe me especially during this pandemic time with Covid 19 and money is really tight right now. Thank you so much!!! May God send you many blessings.
God bless you. This procedure reset mine. It took me a couple tries to get the timing correct. Mine had two (?) codes... an 8 and a 4. It’s heating up now.
Thank you soooo much. I was so frustrated because ever day something goes wrong in my house :( and I was like, ohhhh shit, not this one! You were more helpful than all the videos I watched and all the instructions I read tonight. Holly crap we have hot water again and I didn’t have to pay to get the heater fixed. 🙏❤️
@@mrnoe67tiktok spoke too soon, the error came back..reset again and no luck. Can find the replacement part locally for cheap and looks pretty easy to replace. Still appreciate the video for trouble shooting! Thanks!
Thank you , you are a GENIUS. I reset my heater like you suggested. We painted our basement floor last night and in morning no hot water. PAINT FUMES must have shut the system down . We joked that the smell shut it down and it did. lol.
Thanks for saving me the time of dealing with the manufacturing company to figure this out. Only took me a couple of minutes rather than a couple of hours dealing with them.
Looks like I have to replace the sensor. I called them for a new one and it was under warranty (lucky me) also they were the easiest people on earth to deal with. I’ll be watching your other video on how to install that. Thanks!
It doesn’t look like that anymore. Besides mine is gas. The pilot is on and I don’t have hot water. I had to boil 3 huge pots of water. Also mine doesn’t have a red switch.
Awesome... worked great for me. We had six flashing lights (not 7 as you had) but this fixed it. Our plumbing company said they have lots of problems like this, and the only solution is to install a new water heater! 🤣
Had to reset the darn code again to but the customer service was closed. Couldn't remember the reset instructions I was given two days ago You tube to the rescue. Thanks!
It’s literally 3:37am est an you saved me... I literally didn’t have hot water for 2 in a half days..!!! This really really worked thx you a lot I appreciate ya🥰 “I GOT HOT WATER💃🏽💃🏽💃🏽🥳” an be safe 😷
Thank you SOOO much....I so appreciate the help, gas company didn't know what to do and I searched utube and found you and it fired up just like you said!! thanks so much!
Excellent Video, you saved my tail. Now I can call AHS tell them ii wont need them to come out in a day and a half. Why would Rheem sell some crap like this anyway? Thanx a lot.
ALONG WITH EVERYONE ELSE IN THESE COMMENTS, THANK YOU SO MUCH!!!!! My not even a year old platinum WH did this the other day and I dreaded having to call in service techs, thanks again Noe!
My husband was a very handy man and could fix just about anything. Being alone now I was clueless when my water heater went out. I found your video and it gave me the confidence to try and restart it myself. So clear and precise. THANK YOU!!!
Glad to help, thanks for the visit
I'm a single woman and live alone. I bought a house recently and this happened today. I was able to fix it all by myself. Thank you so very much!!
Glad I could help, thanks for the visit
Did it turn off again? This worked for me but keeps going off again after an hr.😢😢
My husband flushed the water heater tank yesterday and had not been able to get it started again. I found your video and in a couple minutes we were back in business just like your video showed. Thank you Noe!!
Great job!
Thank you!! You helped me get my water hot again! Also, great job on going straight to the solution without a lot of jibber-jabber in the beginning of the video. Much appreciated, Mr. Arriaga!
Thanks, I had the same problem I was out of hot water for three days too. I called Rheem tech support they sent me the instructions. thats when I made the video.
My HVAC guy sent me your TH-cam video. Exactly the fix for the problem. Thanks
Wow, thanks to your HVAC tech he is a smart guy
Very sensitive device. We were having a ceiling painted on the ground floor and the furnace fan pulled the vapors to the basement which locked out the gas valve.
You are amazing!... we are at a cottage in Canada for a long weekend and found the water heater not working on the Friday night.. Panic setting in.... found your video, I had the same 7 light flashes... I followed your instructions exactly.....and now I have hot water for the family!! Thanks so much Mr Arriaga
Glad to hear that thanks for the visit
No one ever talked about the simple reset, so thank you for making a very clean and concise video that saved me a lot of money
Thanks for the comment, and thanks for the visit
God Bless you. Your video saved me from buying a new unit and last two months of living without hot water.
Great to hear!
Thank you so much!! After taking a very cold shower this saved my whole family!!
Love your video, very detailed, love how you keep it sweet and short, straight to the point!! Thanks a lot!!!
thanks for the visit Erika
This video just saved me $3300 per a contractor’s suggestion that I replace my semi new water heater. It was giving me the same 7 blinks and 3 second wait and I knew that I shouldn’t have had to buy a new one so soon. Thank you sir for posting this. I followed the directions exactly as the video instructs and it worked for me. Can’t wait to take a hot bath this evening.
If it keeps happening, then just replace the flammable vapor sensor. it's real simple just 2 wires, I have a video on how to.
@@mrnoe67tiktok thank you so much.
Just had this situation this morning. I was really concerned when I read the words Flammable Vapor Shutdown. Really appreciate the tutorial!! Water Heater started up like a champ. THANK YOU!
Glad I could help
Thought i was having a wave of bad luck. First was my LG fridge which broke down after 4 years only.!. Then the same water heater as yours did not churn out hot water. Thought it broke down too after 3 years. So happy that you made this video. Its perfect now. Thanks a million.
thanks for the visit
My FVS failed because I painted in the basement next to the water heater and I used a lot of mineral spirits next to it. I didn’t know chemicals affected these heater. I gave an AO Smith. I didn’t replace the FVS, I just turned the temperature knob four or five times and the heater kicked on. Without watching this video I would have waited for a service tech to come over three days later. Thank you for this video.
Great for you, thanks for the visit.
Thank You so much for this Fantastic Video!! We have a 55 and older community here in Connecticut that we just finished building 2 years ago and these places are Beautiful! Last week we experienced a rainfall here unseen in many years, 14 inches in less than a week! Water backed up in several of the basements that effected our hot water heaters. I called text support but could not reach anyone so I found your video and watched it. You did a Great Job explaining everything, and it worked!! You saved me $5000 which is the cost of 4 heaters plus tax AND the labor to install them!!! I can not Thank You enough Bro, Keep up the Great Work!!!
Glad to hear. thanks for the visit
@@mrnoe67tiktok I liked and subscribed and would love to see more content like this! Thanks again!
@@sammyvasile5346 Thanks for the Sub
I’m a plumber and I love you. Just installed a hwh and it wouldn’t start and gave me that error code. Replaced the sensor and finally just reset it
Great.. thanks the visit
This was the clearest, most concise video I could find. Worked like a charm, thank you!
Glad it helped!
Agreed!! So helpful
THANK YOU! I had to replace my vapor sensor but could not figure out why the new one wasn't working until I saw this video on how to reset.
My plumber wanted me to buy a new water heater last Friday after he couldn't resolve this exact same issue. I saw your video Friday night, followed your instructions on Saturday morning, and left a message for the plumber that I didn't need a new hot water after all on Saturday afternoon. You saved me over $1,000. THANK YOU!
glad it helped. if it keeps happening change out the vapor sensor.$25 fix i have a video on how to do it, Very simple.
You just saved me over a 1000 dollars on a simple fix. Casteel wanted me to replace two parts, order and buy them myself after waiting DAYS for my first appointment and wait more for them to charge me 475. to install. I believe I triggered the problem when I tested my circuit breakers when I installed my AC thermostat that needed to be replaced.
Glad to hear.
The reset only helps you heat up some water temporarily. You still have to check the part. There's a reason that it's shutting down. And it's dangerous not to have a check by professional.
Thank you so much for your tutorial. You are helping so many people. I just bought house after a week. Boiler wasn't working and I was frustrated and your tutorial has helped me to reset the boiler. Now no need to go other place to shower. May God bless you and prosper further.
Glad I can help
This worked when our water heater went out after floors were refinished (small house, oil stain and polyurethane - lots of fumes). Pilot shut off, 7 blinks. Our valve is just like this (no obvious way to relight the pilot). Thanks for the fast and easy fix!
Thanks for the visit
Service tech 2 here.
Thank you, your video was very helpful. Simple and straight to the point.
thanks for the visit
Awesome video, thank you so much! I'm in a rental property and and landlord said to just unplug it and plug it back in after 10 minutes. I have been without hot water for a better part of the day. This totally worked in one minute. I heard the water heater fire right up 🙌
Fantastic!
I came home dirty from a long day of work. I was ready to clean up and relax when I bumped into this issue. Thanks to you and this video I can enjoy the little things in the life that make the biggest difference!!! Thank you so much!!!!!!
Excellent!
Best video on how to fix this know issue I have ever found. Believe me I have searched for it to fix my water heater MANY times. Well done and simple directions. Thanks!
Glad it helped
Short, simple, and straightforward. Works like a charm! Thank you!
Thanks for the comment
This was an exact replacement for the old one that lasted about 10 years. th-cam.com/users/postUgkx7yWIKcrbA9KMHkGSfcgxW2lsjHT6B8Sh The top of my mitigation tube by my roofline was just a 90 elbow which allowed too much debris to fall down into the fan, eventually ruining it. Without this issue, I bet it would have kept running another 10 years. When I replaced this fan, I added an extra elbow joint so the top tube now it does a 180, which should solve that problem. The radon guys around here wanted to charge me a $300 diagnostic fee, then parts/labor (probably close to $600 total). I installed this all by myself in about an hour for the cost of the fan; it would probably be even easier/faster with two people. FYI the manufacturer's warranty greatly differs depending on whether you install it yourself (1 yr warranty) or have a licensed installer do it (10 yrs).
Green is the color of balance & harmony it relaxes the body & energizes it. It's also a sign of growth.
Thank You!!! I was trying to find a reset button and found nothing until I came across this video! Saved my butt...thanks!
Excellent!
Thank you so much I just did this and it kicked back on ❤❤❤❤❤ I’m a single mom and these videos are really truly helpful
Great job!
Thanks a million! Hurricane Isaias put 5" of water in our basement and our Rheem pilot wouldn't re-light. This was exactly the fix! Looking fwd to a warmish shower for the first time since Monday night!
wow, glad to help
Thank you! Thank you! Thank you!!! This valve went out in my Airbnb & your video saved the day & their night.
Excellent!
Thank you sooo much for putting this video out!! My in-laws water heater stopped working and it had the exact same 7 flash error code which the manual said was the vapour sensor. I replaced that but it still would not fire on not matter how many times we tried. That trick about rotating the temp dial 7 times fired it on immediately!! Thank you again soooo much.
thanks, I also have a video on how to replace a vapor sensor.
Worked like a charm. Nowhere else could I find anything on cycling the control from low to high seven times after replacing the vapour sensor. Thank-you sir!
Glad it helped
Wife yells out from the shower "there's no hot water!"
The water heater threw the seven blinks error code and alerted me to a gas leak thank God, so fixed the leak, reset the gas valve after watching your video, and mamma's happy now...
Cool.. thanks for the visit
Saw a few other videos and was not able to get it to turn on. Your video was the best !!!
thanks for the visit
The Best Video I found on TH-cam to fix Rheem WaterHeater. Thanks for Sharing. God Bless.
thanks for the visit
Thank you sir! You saved me the hassle of calling out a tech!!
Excellent!
So so so grateful for your video! I have hot water again!
Thanks for the simplest and easiest guide to solve the problem!
thanks for the visit
Thank you for no reason apparently this happened to my Hot H2O tank. Husband out of state!! Mine was blinking 7 times too! Worked like a charm!!
Glad it helped!
Thank you!! Worked like a charm! Had a replacement part ordered which wasn't going to be here for a week. I too appreciate you getting to the point. :)
Excellent!
Thank you for sharing this. I was starting to pull my hair out and your video is the only one that shows how to do this!
Glad it was helpful!
1:45 AM and you saved my family from cold showers today. BIG thanks!!!!
Great to hear!
Thanks for this! I’ve came back to your video twice over the past 6 months!
Wow, thanks!
Thank you! I replaced the sensor and when it was still flashing I began calling HVAC because I didn’t know what else to do. I’m glad they didn’t have any immediate openings so I could find this video. It worked like a charm!! You just saved us at least $90!
Excellent!
This happened again today and I came right back to your video, can’t thank you enough!
You might need to replace your sensor
thx worked perfectly, that shower this morning was brutal. then stressing all day at work thinking about buying and replacing my water heater
Great to hear!
@@mrnoe67tiktok i commented to soon. it went down again. had to replace the fvs sensor. but used the reset after replacing the sensor. your vid was still very helpful. thx
@@JGMACHINES Yes, I had to do the same thing after I made this video. I did make a video on how to.
Thanks you helped me so much. I looked almost every video until i found yours. GOD BLESS YOU
thanks for the visit
Thank you sooo much for your video. I finally can take a warm shower without having to call a service guy to come and fix it. You safe me especially during this pandemic time with Covid 19 and money is really tight right now. Thank you so much!!! May God send you many blessings.
Excellent! thanks for the visit
God bless you. This procedure reset mine. It took me a couple tries to get the timing correct. Mine had two (?) codes... an 8 and a 4. It’s heating up now.
Thanks for sharing
Is your electric? Mine is gas and the box has black controls.
Not every hero wears a cape. Thank you so much for your help. You saved me from aving to seek expensive assistance.
You are welcome! thanks for the visit
Thank you soooo much. I was so frustrated because ever day something goes wrong in my house :( and I was like, ohhhh shit, not this one! You were more helpful than all the videos I watched and all the instructions I read tonight. Holly crap we have hot water again and I didn’t have to pay to get the heater fixed. 🙏❤️
glad it helped
Thanks so much, very easy and concise directions and my heater just fired up after following! Very appreciative!
Excellent! thanks for the visit
thanks a lot for the help of this video, helped me get my water heater back up and running.
Great to hear!
@@mrnoe67tiktok spoke too soon, the error came back..reset again and no luck. Can find the replacement part locally for cheap and looks pretty easy to replace. Still appreciate the video for trouble shooting!
Thanks!
Thank you so much for your help! I’m a single mother and it saved me from spending money I do not have!
I'm so glad!
Thank you , you are a GENIUS. I reset my heater like you suggested. We painted our basement floor last night and in morning no hot water. PAINT FUMES must have shut the system down . We joked that the smell shut it down and it did. lol.
Great job!
Thank you, Mr. Arriaga for your research. My Family appreciate your help 😊
Happy to help
Thanks for saving me the time of dealing with the manufacturing company to figure this out. Only took me a couple of minutes rather than a couple of hours dealing with them.
glad it helped. if you have to keep resetting it. then replace the flammable vapor sensor. very simple i made a video on that $25 fix.
noe arriaga thanks.
Looks like I have to replace the sensor. I called them for a new one and it was under warranty (lucky me) also they were the easiest people on earth to deal with. I’ll be watching your other video on how to install that. Thanks!
Thanks!!! You helped my restaurant have hot water!! God Bless!!
Wonderful!
Literally was my exact issue. Thank you! Every other tutorial was for the manual switch.
Thanks for the visit
Thanks bro... Monday morning and it's 41° degrees out. Just reset mine!!!
thanks for the visit
This worked like a charm!!! I’m a single woman and could do this! Thank You!!!
thanks for the visit
It doesn’t look like that anymore. Besides mine is gas. The pilot is on and I don’t have hot water. I had to boil 3 huge pots of water. Also mine doesn’t have a red switch.
i JUST DID IT. THANK YOU VERY MUCH. I ALMOST TO BUY A NEW ONE. THAT WILL COST OVER 1,000. THANK YOU AND THANK YOU.
good
Just had this issue happen to me, thanks for getting my heater back up and running and save a service call!! ❤️❤️❤️
Great to hear!
Awesome... worked great for me. We had six flashing lights (not 7 as you had) but this fixed it. Our plumbing company said they have lots of problems like this, and the only solution is to install a new water heater! 🤣
No, all you have to do is replace your flammable vapor sensor. Easy to do check out my video on how to do that.
Very helpful, was just reset my water heater based on your video and worked. Thank you and greatly appreciated. 🙏
Glad it helped
Rheem has limited hours when I called them. Noe Arriaga is on 24 hours a day. I LOVE YOU, MAN!!!
Glad I could help
I had a different error code (8-3: electronics fault detected), but this procedure fixed it as well. Thank you!
thanks for the visit
Thanks for posting this video. I had the exact same issue and following your instructions I was able to reset my water heater.
Thanks for the visit
Thanks so much! I followed your instructions and got my Rheem working again.
Fantastic!
Just fixed mines following your directions! Thank you.
Excellent!
Thank you! Exactly what I needed to get my water heater on again. Great job on the video
thanks for the visit
Many many thanks for posting this video. It solved my problem and prevented many hours of calls to manufacturer for warranty
or solution.
thanks for watching
I tried it and it works
Thank you very much for charging knowledge
Great 👍
Thanks for the info brother. Most videos take forever to get to the point. Thanks
Thanks for visiting
Had to reset the darn code again to but the customer service was closed. Couldn't remember the reset instructions I was given two days ago You tube to the rescue. Thanks!
if it keeps happening, just replace the Vapor sensor very simple. I have a video on that.
It’s literally 3:37am est an you saved me... I literally didn’t have hot water for 2 in a half days..!!! This really really worked thx you a lot I appreciate ya🥰 “I GOT HOT WATER💃🏽💃🏽💃🏽🥳” an be safe 😷
I'm so glad!
Applause From My Family!! Thanks for the tutorial.
Glad to help, thanks for the visit
On-point instructions!
Thanks for the visit
Thank you SOOO much....I so appreciate the help, gas company didn't know what to do and I searched utube and found you and it fired up just like you said!! thanks so much!
So glad!
This saved my life lol, this whole video worked for me and got the pilot back on 🙌🏻🙌🏻🙌🏻🙌🏻 thanks a lot !!!!
Great to hear!
It wasn’t working for me until I cracked an ultra! Boom, fired up next shot. Not telling my wife the secret.
Thanks for the LOL you gave me
Thank you so much for this excellent tutorial..
It saved me having to call someone out ..
Great to hear!
Thank you! Water heater kicked right back on after these steps!
Excellent!
Replaced vapor sensor and followed your process and boom we good thank you
Glad to hear that. thanks for the visit
Had to repeat 3 times but it finally worked ! Thank you for the video
Great to hear!
You Rock! Followed your instructions to the tee and the water heater and pilot light turned!!! Thank you for sharing!
Great to hear!
Do have the instructions that you printed out because my only flashing 3 times and pulse
Nice video instructions. Worked great restarting my water heater.
Great to hear!
Thanks so much help out today the whole weekend went without hot water... thanks so much and God bless 🙌
Great to hear!
We had that problem today we thought it was a main problem thank you so much for the video 🙏🏻
Glad it helped
This saved a lot of people some hard earned money 👊 Thanks!
Thanks for the visit
Excellent Video, you saved my tail. Now I can call AHS tell them ii wont need them to come out in a day and a half. Why would Rheem sell some crap like this anyway?
Thanx a lot.
Glad it helped
Just what I needed after my basement flooded, thanks!
thanks for the visit
ALONG WITH EVERYONE ELSE IN THESE COMMENTS, THANK YOU SO MUCH!!!!! My not even a year old platinum WH did this the other day and I dreaded having to call in service techs, thanks again Noe!
You're very welcome!
Thank you! Kid painted with oil based paint by heater so i blamed him that he messed with it, never knew it had that sensor on it.
that will do it. thanks for the visit
It worked like a charm brother can’t thank you enough for the help Godbless
Glad to hear it
Thank you for the help on the video my water heater run like a champ now
Great to hear!
You helped us having hot water again without paying a penny. Thank you
Thanks for the visit
Great video! Mine started right away just like in the video. Thank you so much!
Great to hear!
@@mrnoe67tiktok And now it turned off again ☹️ Why do you think that is?
@@dimasvasquez6268 You need to replace the flammable vapor sensor. Very simple check out my video on how
Thanks so much sir! I'd have never figured out the turning the knob 7 times thing!
I called Rheem Tech support and they sent me the instructions on how to reset it
Thanks just had the same problem I appreciate you posting this how to clinic
glad it helped
Thanks! You saved me too. I hope there were more people like you.
Glad I could help! thanks for the visit