How to Replace Ignition Coil 00-04 Ford Focus
ฝัง
- เผยแพร่เมื่อ 21 ก.ค. 2019
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/109/aX/ignition-coils
This video shows how to remove and replace a failed, damaged, weak, or misfiring ignition coil. The video is applicable to the 00, 01, 02, 03, 04 Ford Focus.
🔧 List of tools used:
• T25 Socket 1aau.to/oh3/1AXAA00008
• Ratchet 1aau.to/oH3/1AXAA00016
• Socket Extensions 1aau.to/oBo/1AXAA00015
• Dielectric Grease
• Marker / Writing Utensil
• Magnet - Extendable
For More Info visit us at 1aau.to/h/bJe/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - ยานยนต์และพาหนะ
![[Full Episode] MasterChef Junior Thailand มาสเตอร์เชฟ จูเนียร์ ประเทศไทย Season 3 Episode 4](http://i.ytimg.com/vi/e7Oqqo90x_w/mqdefault.jpg)
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
These videos have probably saved me 100's on labor and sketchy auto shops. Seriously such a great business model you guys have, teaching people how to fish for free and then being the bait supplier.
I would like to say a HUGE Thank you for the very very descriptive and excellent video. Your video was the best. I live in the UK and I needed to change my coil on my 2005 Ford fusion but had no idea how to. I especially liked the way you showed how to get the wire loom connected to the coil AFTER you unscrew it from the engine block. By turning it upside down and pushing the metal clip to release it. Without your video, I thought you'd just yank it off. Thank god I watched your brilliant video. Well done mate highly recommend keep it up!!
one thing that might help people like me is explaining or showing why these parts need replacing before do the placement. the sound it makes...how to know the part is broken. like a diagnosis example. I have had to learn the hard way. now I know what my truck sounds like when the coil goes out! but it cost me time, money and frustration trying to figure out what was wrong in the first place.
Thanks for checking us out and your feedback! +Kathy Galvin
First thing you should have done was get an error code lol
Thank you very much for this clear, communicative instruction. Tomorrow I'm going to replace the ignition coil in my Focus mk2, everything looks the same, so it should be easy. Cheers!
+@SirGawainDF Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c
Great video, like always. I replaced the ignition coil in my 2003 Ford Focus ZTS. I agree that you should label the cables. It's very helpful when connecting everything back. Some will say that this is a easy job. It should be, but if you have 3 out of 4 stripped torx T25 screws like I did with about 100ft lbs of torque on them then it becomes much more difficult. Mine had been replaced before. If you are stuck on the side of the road or in a parking lot, know that you can replace this ignition coil without mounting it to the bracket. It is not grounded through the screws. You can break or pry the old one out temporarily breaking the plastic. Then as soon as you get to a safe area, connect it properly. I recommend replacing the plugs at the same time and inspecting the wiring harness that is attached the the connector.
Changed my 2002 mk 1 focus’s coil unit as I was getting intermittent misfiring and car was losing power every now and then. The engine warning light came on as well.( the coil was cheaper than the ignition leads) the repair worked and I was going to disconnect the battery for 15-20 mins to reset the ecu and make the engine light go out, but after 10 miles to my starry eyed surprise, the light turned itself off.
Thanks for the video, i have the same car your working on 345,000 mile on it. bought it new. I'll be buy the hood cable soon.
Thanks! Very good explained!
I'm looking forward to becoming one of your customers, I love all your videos and you seem very reliable, good job see you soon...
+Geovanny German Thank you for your feedback and your business!
Good video. My 2000 Focus has bolts at all four corners. Also it might be worth mentioning the cylinders are sequentially numbered starting at the opposite end from the coil in case you forget to number the wires.
درود بر شما متشکرم اقا thanks
Thanks for the video.i had a question
Should I disconnect the battery min before installing the ignition coil?
anything electrical it would be best to disconnect your battery so it doesnt cause any blown fuses or anything that could be caused.
I notice this is the ztech DOHC engine, will this be the same process for a Se model SOHC engine?
Tx for the vidéos
Hey i have an ford focus 2001 1.4L with the zetec-se engine. The problem. Is that 1 piston seems it doesnt work and its piston 2 i have change ignition coil,spark plugs,wires ,(all new parts) and still working with 3 cylinders any suggestion?
Literally JUST had to change this part yesterday.. for what it’s worth, anyone replacing the ignition coil should take a really good look at the connecting harness. They’re notorious for cracking insulation around the base of the connector wires, usually requiring replacement as well. Go figure, the harness is about as much as the whole coil! Any cracks in the housing of the coil, it’s shot. Any cracks in the wiring harness connector, it’s shot. Symptoms include jerking under acceleration, dead misfire, and poor idle.
Edit - Also, when fastening the four Torx-head screws, be sure to tighten them evenly and completely! The metallic sleeves in the ‘ears’ of the coil bolt-holes act as the ground for the coil. Loose screws = bad connection .
Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c +XxHyJyNxX
No need to unplug battery first?
What size is the bolts ?
I have an 04 and its not like this at all. theres a garbage harness coming from all the ignition plugs and going god knows where. i cannot find this part.
any suggestions
I’m sure it’s fine but dear god my palms get sweaty watching power tools and torx bits
Bro so is the old one bad