so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
Took a couple of tries since the video isn't very clear or explained. The difficult part is the end. You have to pull the last knot to the end till it gets to the string with the two knots you made in the beginning. Once you get there it'll make another knot and you'll be able to slide the first string with the two knots on that last knot you made. A little confused but figured it out. Works very well.
Idk what y’all are on this saved me honestly the rest of the tutorials were to complicated and I have to make 40 valentines bye tomorrow morning thxxxxxxx
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the very end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet! I hope this helped y'all
Guys if you do end up figuring it out, just know that over time, the loop may become too tight to slide on the thread. Especially if it gets wet it's like impossible to adjust it
OMG THIS IS SO HELPFUL!!! i usually have a hard time wearing my bracelets because i can’t do it myself so I have to ask someone to put it on and also get it off. thank u so much
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
I sow the video Yesterday and I was there is no way this works but I tried just now and I got it in the first try. I love makin braclets and I usually make them with adjustable knots, but i tried something new and I wanted it to be adjustable so this video helped a lot.
Guys it’s that difficult 😂 just try following along even if you think you can’t see- it took me maybe 2 tires and I’m really not the most intelligent person you’ll ever meet 😂💀 Thanks for the tutorial btw!
after lots of tears, frustration, 8 tissue boxes, and a broken ipad screen, i could still never do it
Feel bad for your ipad
Ik this video is just rubbish and the explanation is rubbish
Theres other ways to do it that's much easier
😂💯
Just do the slidable adjustable knot it’s very easy compared to this and convieneent
POV:you can’t even see over the fingers 💀
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
@Sweetie-POP still don't know 😢😂😅😢😢😢
@@ITSS_GENNI mission failed.
@Sweetie-POP nah I found how to do it....
@@ITSS_GENNI good job child.
I think I need a tutorial on the tutorial.
😂🤣😂
😂😂😂
“do what i’m doing” as if her hands aren’t covering the entire screen 💀
Fr
Frrr
Excellent, practical, valuable, fast, easy, beautiful !!!
Took a couple of tries since the video isn't very clear or explained. The difficult part is the end. You have to pull the last knot to the end till it gets to the string with the two knots you made in the beginning. Once you get there it'll make another knot and you'll be able to slide the first string with the two knots on that last knot you made. A little confused but figured it out. Works very well.
Thank you!! I really needed this 😅
Everyone talking abt ur hands in the way but it was pretty easy to follow.
this was actually so easy thanks 🙏🏽
I've watched this a thousand times and still can't do it. 😢
It's very helpful thanks 🙏
Thank you! This acctually works!!
Thanks this really helped
Omg this was so helpful thank you! ❤️
This was so helpful thx for making this video
this was so good i understood what you did perfectly thank you so much
Ty this helped so much
Wow it works it is very simple i love it thanks. I didn't understand it at first but when i tried it I did it right.
Hey thanks for the tutorial! I managed to get it. Tip for the rest of y’all, try slowing the video down :)
thnkyou soo mych bruhhh thankyouu frrr
THANK YOU
This is awesome thank you !
That helped a bunch!
It’s actually simple thxxxx
omg tysm it works so good!!❤
Thank you, this Helped a lot.😊
Girl its hard with her crusty hands in the screen
@chanthachthi3872 srry it took so long to respond but still it worked for me
Love the song🤗
THANK YOU! If you are struggling, watch the loop and how she tightens it!
THANK YOU SO MUCH! THIS HELPED ALOT❤
Took a couple tries, but works very well! Ty!
Wow😊, thank you that’s actually very helpful
Thank its helpful!
Idk what y’all are on this saved me honestly the rest of the tutorials were to complicated and I have to make 40 valentines bye tomorrow morning thxxxxxxx
It actually works thank you for this ❤
Thanks this helped a lot❤
Wow it worked thank you so much🎉🎉
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the very end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet! I hope this helped y'all
The song I’m obsessed
Guys if you do end up figuring it out, just know that over time, the loop may become too tight to slide on the thread. Especially if it gets wet it's like impossible to adjust it
Yeah that’s happened to me too, but u can just slightly loosen the actually knot like how u would with a normal knot and then it works properly again
@@ThatshortgirlYk thank you!
This video has totally helped me! Thank youuuuu!! 😍❤❤❤
OMG THIS IS SO HELPFUL!!! i usually have a hard time wearing my bracelets because i can’t do it myself so I have to ask someone to put it on and also get it off. thank u so much
Yess tyy
Finally someone who understood
Thanks for the bid I didn’t know how to make it thanks again 😆
Omg! I luv you sm!! Thank you!!!
I never knew how to do it and I lost it at freaking Orlando because it wasn’t on right!!!
Everything was good until I decided to make an adjustable bracelet 😅😅
Tysm😊
After many attempts, I realize that the bracelet I was using wasn’t the right shape
ppl who stayed for the song
👇🏽
Ty this helped!
Her:Do what I’m doing
Me:I don’t know what ur doing!💀
so basically you make a loop on one side by tying a knot at the end of the bracelet type.(for example i did a braided bracelet and i put a knot at the end of the braids.) and on at the tip of the bracelet. (same side, just the vary end. :') ) then you divide up the strings in between the two knots to make a loop. then, you put the side that you didn't tie the loop-knots onto, into the loop we just made. Keep pulling the string in until you have a loop about the width of the gap in between two lines on your middle finger. then, you take the tail of the string we didn't tie knots onto and put it it into the loop and tighten it. you need to have the tail knotted into the loop of the bracelet or it will fall apart. know, you should have an adjustable bracelet!
ty🥰
Ty ty ty ty tysm new sub u saver my live
Life savior
The video : 😊
The song : 😮💨🏃♂️💨
Omg it works!!!
Thank you and I have done it too thank you very much❤❤
I have to redo this so many times cause it gets SO TIGHT and it won’t slide after a few days
After all that frustration I finally got it 🤦🏽♀️
See this is why u should have lots of subs bro you are literally a legend 🔥
Ohhh my goodnessssss... I finnally did it after my 100th tryyy 🎉🎉
It's such a brilliant way to end a bracelet like this
I sow the video Yesterday and I was there is no way this works but I tried just now and I got it in the first try. I love makin braclets and I usually make them with adjustable knots, but i tried something new and I wanted it to be adjustable so this video helped a lot.
y’all it’s pretty easy
Guys just put the end in the hoop close the hoop and tie it cut the rest so u only have one string
"do what i do"
the loop tightens if i accidentally pull on both sides and then doesnt move
I need a tutorial on the tutorial
just make sure at the end, you have all the strings pulled in the same exact direction as she does and it works!!
she just kind of does it upside down
After 100 tons of frustration, I have finally did it
Why is everyone complaining😭 it takes some tries to actually understand what's happening.. happens with almost every tutorial
Could you please make a tutorial?😅🤔🥱
i got it thanks 👍
I'mma try this but does it actually work because I'm making a precious gift for my moms birthday
thanks!
i broke my bracelet trying to get a knot undone that was created from trying to do this and i still can’t get it
Love
I did it without struggle 😎💪
Thano you
Worked on my first try which was amazing but I had to watch the video like 100 times to make sure I got it right
Thx
love the song what’s it called ❤😊
I use this technique for fly fishing.
😊👊
I make those and I just make a slip know and I always can adjust it-
mine keeps locking up
What I started with :
A unfinished bracelet
What I ended up with :
25 tissue boxes a broken screen frustration ruined bracelet
Somehow I Normally don't get these but I got it first try after watching it 3 times
How do you make the loop?
i figured it out but it doesn’t slide 😭😭😭
OMGSH I JUST DID IT THANKS
THAT WAS SO CONFUSING WISH THE VIDEO WAS SLOWER
I tried to do it but I can't see because of the finger and Can you do it slowly
I cured 5 times trying to do this
i did his so many times yestrday for oders so tank you
Its hard but i got lucky and did it first try
Guys it’s that difficult 😂 just try following along even if you think you can’t see- it took me maybe 2 tires and I’m really not the most intelligent person you’ll ever meet 😂💀
Thanks for the tutorial btw!
Instructions unclear my phone is now broken
that was so much easier than i made it out to be 🙃🔫
Full sprint to sub Thank God 4 u and this video watched many and all them confusing and too many dang steps 😂😂 thanx again❤
What is that called?
I know an easier way but I guess this works too
I did it but it’s not even tight
Erm how do I do this?
It works! I just got confused
I DID it 🎉 I just put the video speed to be slower so I could see what they were doing😊