Hey Cajun, really appreciate the link from your video and your recommendation to come and see a damn strong 395 that SCarr’s built! That’s a 28” Rollomatic and it’s an 8pin…? Dang it man! She’s rippin’ chip!!! Really appreciate that duration information because I have found an extra cylinder and I’ve got to do some work on mine eventually! Great Video!
Pretty much was my thoughts on the 288 farmertec cylinder. Without machine work and no gasket the FT288 cylinder intake was 154 duration. They definitely don’t need a bunch of machine work to make decent runners. Great video Shaun! Is important for people getting into this hobby to start realizing that porting all cylinders or saws isn’t exactly the same. It’s about optimizing what you have to work with and everyone has their own way of doing this. 👍🏽👍🏽👍🏽😁
Is a 661 piston a little taller from the pin so you could cut the squish and do that piston swap??? Those Duke’s little moly pistons are remarkably good quality for the $27 or under $30 bucks apiece for whatever model saw’s your doing…I’ve been using a couple of those in different build’s and have been super stoked with their performance! You must have some freaking awesome compression with the 50 thou cut from the band! Dang near 190? That’s a fantastic build on the clone and it’s a ripper… but that OEM saw’s just straight singing and blasting chips!!! Your selling a handpiece that will run on the Foredom’s???
I wouldn't bother with a 661 piston as they have the ring pins in a terrible location. I've been really happy with the Duke's pistons. Compression on these is around 215psi. Check out my other videos for stroked 394/5's that really throw the chips! Yes, the handpieces will work on a Foredom or any other key drive flex shaft motors.
Hi Shaun, curious where these ported 395's tune to.....i know reading the plug is a safe tell but in general are you tuning to between 13 500 and 13800 on these one good and hot?
Man you build about the meanest 395s I’ve ever seen!
Hey Cajun, really appreciate the link from your video and your recommendation to come and see a damn strong 395 that SCarr’s built!
That’s a 28” Rollomatic and it’s an 8pin…? Dang it man! She’s rippin’ chip!!! Really appreciate that duration information because I have found an extra cylinder and
I’ve got to do some work on mine eventually! Great Video!
👍👍👍I bought the kit saw didn't have the piston issue it fit well
Pretty much was my thoughts on the 288 farmertec cylinder. Without machine work and no gasket the FT288 cylinder intake was 154 duration. They definitely don’t need a bunch of machine work to make decent runners. Great video Shaun! Is important for people getting into this hobby to start realizing that porting all cylinders or saws isn’t exactly the same. It’s about optimizing what you have to work with and everyone has their own way of doing this. 👍🏽👍🏽👍🏽😁
Man I really like that hand piece I ordered of yours. It’s kick especially for the small cylinders
Awesome. That’s great to hear.
Is a 661 piston a little taller from the pin so you could cut the squish and do that piston swap??? Those Duke’s little moly pistons are remarkably good quality for the $27 or under $30 bucks apiece for whatever model saw’s your doing…I’ve been using a couple of those in different build’s and have been super stoked with their performance! You must have some freaking awesome compression with the 50 thou cut from the band! Dang near 190? That’s a fantastic build on the clone and it’s a ripper… but that OEM saw’s just straight singing and blasting chips!!!
Your selling a handpiece that will run on the Foredom’s???
I wouldn't bother with a 661 piston as they have the ring pins in a terrible location. I've been really happy with the Duke's pistons. Compression on these is around 215psi. Check out my other videos for stroked 394/5's that really throw the chips!
Yes, the handpieces will work on a Foredom or any other key drive flex shaft motors.
That tables exallent!!
Mean kitty, holy smokes
Subbed . Also where do you order your hand pieces from those are nice and I can't seem to find any
Luckydogmfg.com
Was your G395XP an early one? Supposedly they fixed the piston issue. Nice work on both saws. They run head to head.
Yes it was an early one. I've heard they've fixed it but I haven't seen a newer one to validate that.
How much do you sell right angle tooling for? Do you do it through a website?
Yes, you can buy them on my website. Luckydogmfg.com
Do you have a website?
luckydogmfg.com
@@srcarr52 cool thanks!
Nice runner! I'm waiting on the orange ones to be back in stock. U ported the stock cylinder?
Yes, I ported the cylinder that came on it.
Hi Shaun, curious where these ported 395's tune to.....i know reading the plug is a safe tell but in general are you tuning to between 13 500 and 13800 on these one good and hot?
Were these running 7 or 8 pin?
8 pin.