Excellent - made finding the fixing positions very easy without having to guess and break something off as can happen when older panels get a little brittle.
Hi Fix and Drive, I have the same car as you but my car has plastic rivet clips holding the front bumper on where it attaches near the front wing, the passenger side clip has snapped off. I see that you've used a screw to hold the bumper in place instead of the rivet clips, which screw did you use to attach it? Thanks :)
Great tutorial. I was happily following along until I found both of the screws in the wheel arches were stripped. Thankfully a local garage is going to get them out, which means I can still save money and the rest myself 👍🏻
hello, can you tell me if the lower crosspiece of the front bumper is fixed with some seams? I noticed my 107 is bent and I would like to replace it. thank you
Spot on.... thanks. Do you know.... would I need to remove the front bumper plastics to change a headlight. Nearside headlight is broken and I've ordered the replacement. Just planning how to get it all out and back together. Many thanks. Steve..... edit added....hahaa...just found your other headlight vid.... thanks ... perfect. 😁😀
Bonjour Monsieur pourrez-vous nous montrer comment peut on purger le liquide de refroidissement cur une C1 diesel et sur nous montrer l’emplacement du bouchon du radiateur et les valves , je vous remercie d’avance . Cordialement
Thanks a lot for your efforts. The tutorial was very helpful and is very detailed. Helped me a lot, and I am very thankful because I learned a lot and it saved me so much money. Thank you so much!!!
Check the numberplate screws!.....Thanks a lot, very helpful. However on the car I worked on, the numberplate screws were fixed to the body and stopped the bumper coming loose until I realised and undid them - I thought it was just catching somewhere. This probably varies with models or fixings but worth being aware of. Also if you have fog lights in the bumper, the wires will be attached - this came from another similar video. Otherwise the job was very easy, if you have a box spanner set, both taking on and putting back (in my case to replace the horn).
Excellent - made finding the fixing positions very easy without having to guess and break something off as can happen when older panels get a little brittle.
Thanks for the tutorial! Very helpful and well visualised.
merci mon gars toi tu sers a quelque chose !
well done mobile mechanic in london saved me a lot of grief
Excellent videos, you make me the life easier.
Seems “old school” now. Not a single electric driver used!
Hi Fix and Drive, I have the same car as you but my car has plastic rivet clips holding the front bumper on where it attaches near the front wing, the passenger side clip has snapped off. I see that you've used a screw to hold the bumper in place instead of the rivet clips, which screw did you use to attach it? Thanks :)
Bardzo dobry tutorial!
Great vid, nice and simple, good job, thanks
Straight forward instruction, appreciate it!
Great video. I never comment on videos but wanted to say thank you for not talking endlessly.
Excellent video ...easy peasy !!! Only cos ya showed us !!!
Hi man, nice video, for change the Horn we do this ? Or another thing more easier is possible ? Sorry for my Bad english im french, thanks a lot !
Yes, I think you need to remove the bumper to get access to the horn.
@@fixanddrive Thanks, where is the horn exactly, you know ?
It is visible at 4:13
Super video, thanks a lot!
Great tutorial. I was happily following along until I found both of the screws in the wheel arches were stripped. Thankfully a local garage is going to get them out, which means I can still save money and the rest myself 👍🏻
🇺🇦👏👍
Спасибо! Хорошее видео)
I have peugeot 107 2008 no have fog light, i can change for front bumper with fog lights? I think peugeot 2010- have .
those look like opel rims...
Thanks can't do it without you
Looks easy enough😂.
Thanks very helpful
Perfect, thank you very much!
Awesome just the advice I needed!
Thank you! Good tutorial! :)
Thank you.. can you advice if I have front fog light, do i have to take out the front bumper or is there a easier way? Thank you.
thank you , very helpful
complimenti Bravi.
Nice work
Great instruction!
helped me a lot Thank You
hello, can you tell me if the lower crosspiece of the front bumper is fixed with some seams? I noticed my 107 is bent and I would like to replace it. thank you
Spot on.... thanks. Do you know.... would I need to remove the front bumper plastics to change a headlight. Nearside headlight is broken and I've ordered the replacement. Just planning how to get it all out and back together. Many thanks. Steve..... edit added....hahaa...just found your other headlight vid.... thanks ... perfect. 😁😀
Best
This is very clear, nice video
Bonjour Monsieur pourrez-vous nous montrer comment peut on purger le liquide de refroidissement cur une C1 diesel et sur nous montrer l’emplacement du bouchon du radiateur et les valves , je vous remercie d’avance . Cordialement
Thx So Much! , the first thing that i would love to change on my newbie second hand 107 :D
There is no bolt on the front of the wheel arch like you show ?
Beim dritten Versuch kam das Bon und jetzt bin ich das Gepiepse endlich los! Danke! 👍
Thanks you very much for this universal language tutorial 😊
Hello
Can you help me?
Do you know where the horn relay is?
Thanks! Very helpfull video. well done. 👍
Thank you so much for this video 👍👍👍
Very useful, thank you very much.
A jak zdjąć tylny?
th-cam.com/video/vVzpYhjyeZU/w-d-xo.html
Love it, thanks buddy.
Excellent instructions thanks.
you are the hero Internet deserve.
Very Good!!!
pokazane jak trzeba
Spot on. Thanks again!
Thanks good video man
this is invaluable info, thanks for posting.
very well made video
Thanks ! :)
thanks!!!
bravi sto' imparando da questi video. Ho acquistato 1 Peugeot 107 vorrei info come sostituire gli specchietti laterali grazie a presto
hello does this also work for a toyota IQ? thanks!
don't know, buddy
Хорошая машинка 👍
Спасибо!👍
thank you Saved me a lot of money.
you're welcome, mate
Thanks a lot for your efforts. The tutorial was very helpful and is very detailed. Helped me a lot, and I am very thankful because I learned a lot and it saved me so much money. Thank you so much!!!
I didn't understand from this video how you detach/reattach the catches. Can someone explain?
exactly as it is shown in video. Just push and pull maybe a little force.
Thanks for a great tutorial! What size and length are the screws that you used to replace the plastic rivets on the sides of the bumber?
Check the numberplate screws!.....Thanks a lot, very helpful. However on the car I worked on, the numberplate screws were fixed to the body and stopped the bumper coming loose until I realised and undid them - I thought it was just catching somewhere. This probably varies with models or fixings but worth being aware of. Also if you have fog lights in the bumper, the wires will be attached - this came from another similar video. Otherwise the job was very easy, if you have a box spanner set, both taking on and putting back (in my case to replace the horn).
dzięki z Moskwy!
greetings from Poland