I used these with the Team Catfish weight slides to make a th-cam.com/users/postUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.
Hello from New Zealand. Thanks for posting such an informative video. Question: How many jigs can you make out of one mold before it starts to lose it's shape?
I made 50pcs jigs out of that mold and still in good shape and my friend is using it but I don't know if the mold is still useable...if I where you I better use high temp silicon for making a mold and the result are much better...try to watch VARNA FISHING in youtube he has a video using silicon for metal jig...thank you have a good day my friend...
Thank you for all your videos very helpful I’ve made some molds for some larger jigs (8-10)oz Do you need a releasing agent for the lead in a plasterparis mold
I don't use any releasing agent in my plaster of paris mold if you use molten lead but if you're making a plastic lures using plaster of paris mold you better use some releasing agent..
@@catherineromeo4891 What way are you planning to use the mesh wire? Use an alpha-plaster, instead of plaster of Paris, which is too soft and prone to chipping and crumbling at the edges. Something like Crystacal-R, or Herculite is far better suited. I use both with excellent results. You can use a special silicone for low-melt metals that is more expensive but also very good.
Pwede master lagyan mo nlang ng semento para mas matibay at lagyan mo ng wire screen para iwas basag...bago mo gamitin siguraduhin mong tuyong tuyo sya ng hindi k mgkaroon ng pangit n result...
Well to make it stronger you may put a wire mesh or some mould maker use fabric...and before you use it make sure that it is fully dry or you may bake it to dry...
Pwede pure lead lng kung mghhalo k ng tin gamit k ng borax para mghalo sila yung tin para lng medjo matigas yung lure kpg pure lead mdali syang madeform kpg kinagat ng isda o kya tumama sa mga bato
the trade-off of too much water is the fragility of the end product... I reckon that for molds you should do roughly 3:2 plaster to water ratio, and if you need it thiner for the details you may add a splash more but that will make the mold weaker. For usual use, for instance to be cast into a mold for a solid piece, the rule of thumb is 2:1 ratio PoP to water.
aba lupit master keep it up
I used these with the Team Catfish weight slides to make a th-cam.com/users/postUgkxdmsDj7fQXe77DC0l7P7ua8B3PiESUubM Carolina rig and they were perfect for the ponds I fish. I have also used them to make 3 way rigs and these work perfectly. Haven't had any issues with them snagging in rocks or in weeds yet.
Ganda pagka gawa master Isang kaibigan Isang pindot sa Bahay q.
Nice vid master. Patapik din ako sa pulang butones ko bukas. Gayahin ko to.
Sure master...bibisita ako jan sayo bukas...salamat and keep safe
Makagawa na rin ng sariling lure..salamat sa tutorial master
Salamat master...oo kahit anung design pwede gawin kpag my mold kna mas makakamura kapa...
Salamat sa pagshe share ng knowledge mo master👌
Ang galing master... Godbless po..
Ayos master! Ang galing nyo po...
Ayos master slmat s tutorial fish on tyo hihi
SALAMAT MASTER ako n bahala bukas...
First Blood master...Ganda ng jig mo...
Salamat master makabisita din jan s spot mo bukas...
Watching from south.. sending my best...
Senpai eto na uli ako sa fishing spot mo. Nice content Senpai. Happy fishing and god bless 🐟🐠🎣 Fish on...
Salamat master
Welcome Senpai. Tight line always. Fish on...
this a good share my friend, very useful and crafty
Thank you very much
Ang galing master.
Maraming salamat
Hello from New Zealand. Thanks for posting such an informative video.
Question: How many jigs can you make out of one mold before it starts to lose it's shape?
I made 50pcs jigs out of that mold and still in good shape and my friend is using it but I don't know if the mold is still useable...if I where you I better use high temp silicon for making a mold and the result are much better...try to watch VARNA FISHING in youtube he has a video using silicon for metal jig...thank you have a good day my friend...
Thank you for all your videos very helpful I’ve made some molds for some larger jigs (8-10)oz Do you need a releasing agent for the lead in a plasterparis mold
I don't use any releasing agent in my plaster of paris mold if you use molten lead but if you're making a plastic lures using plaster of paris mold you better use some releasing agent..
Thank you 🙏 I’m trying to make 9-10oz jigs will the plaster Paris molds hold up I’ve put a mesh & wire in it when I pour it. Thank you again
@@catherineromeo4891 What way are you planning to use the mesh wire?
Use an alpha-plaster, instead of plaster of Paris, which is too soft and prone to chipping and crumbling at the edges.
Something like Crystacal-R, or Herculite is far better suited.
I use both with excellent results. You can use a special silicone for low-melt metals that is more expensive but also very good.
Boss same lng ba ang plaster of paris at ang white cement? Or alternate lng ang white cement kpag walang POP?
Ang plaster if paris po yn yung ginagait pggawa ng mold ng postiso ng mga dentist pero pwede po yung white cement gamitin...
Pa syawt awt naman idol 😁
Which kind of lead alloy u use for metal jig?
Lead,tin, antimony percentage?
yay... more to watch :)
Nice video master
salamat master..
Mas interesado ako dun boss sa pag gawa ng kahoy hehe. Napindot ko na bosing pabalik naman salamat.
Salamat master..yung pagawa ko ng kahuy n model ginaya ko lang po yung dati kong lure na luma...tapos kunting sand paper para kuminis sya...
Nice video lod's👏👏👏
Salamat master..ako n bahala samahan kita s adventure mo din...
Salamat
New subs Po💪
same lang po ang plaster at ang white siment
?
Tingin ko po opo same lng sila
Master ask ko lang po kong pwde din ba gamitin ung white cememt pang gawa ng molding? Wala kase mabilhan ng plaster of Paris dito samin salamat po
Pwede master lagyan mo nlang ng semento para mas matibay at lagyan mo ng wire screen para iwas basag...bago mo gamitin siguraduhin mong tuyong tuyo sya ng hindi k mgkaroon ng pangit n result...
Sir, after ano ina apply niyo na pang finish? Clear paint?
kung s molde po ba...wala n po...pero kung sa lure ay clear epoxy po...
How do you stop moulds from cracking?
Well to make it stronger you may put a wire mesh or some mould maker use fabric...and before you use it make sure that it is fully dry or you may bake it to dry...
Khit anong lego jan master pwed?
Pwede master basta hindi tumagas ang mold cement
Sir nag halo k p ba ng TIN sa LEAD?
Pwede pure lead lng kung mghhalo k ng tin gamit k ng borax para mghalo sila yung tin para lng medjo matigas yung lure kpg pure lead mdali syang madeform kpg kinagat ng isda o kya tumama sa mga bato
@@angelswayofadventure8368 salamat po
Anong size ng stainless wire sir sa jigg na gamit mo.. tnx
Sir mga ilan po ba jig kayang magawa nyan sir?
Saakin nkagawa ako ng 30 to 50 pcs bago sya ngkaroon ng mga flashing at crack...
Pwede po makahingi ng dample lodi hahhaha
sure this fishing season...
ano gamit mong wire lodi?
gauge 20 stainless steel or yung 1/32 tig welding rod stainless...
Hi sir, ano pong modeling clay yan? Yung parang sa mga bata po ba? Or polymer clay po yan? Salamat po!
yung nilalaruan lng ng mga bata yn master
Ano po difference ng pulang packaging sa blue packaging na plaster of paris?
Same lng po yn...
@@angelswayofadventure8368 ok thanks po
Master baka nmam pwde ka mag binta ng stainless wire bender DIY
lugi master sa shipping nasa canada ako nkatira yung shipping talong talo..
@@angelswayofadventure8368 ahh kaya pala hahay cno kaya pwde gumawa ng ganiyan d2 pinas master
Nasan ang white cement??
Boss anung no. Pla ng steel wire na gamit u?
Di ko alam anung no. pero 1/32 or 0.0625 ang gamit ko...
Hi. What the ratio of water and plaster?
Usually it is 1:1 but i put 1 plaster to 1.5 of water to make it watery and it will easy to pure it and go to the tight corner much better...
the trade-off of too much water is the fragility of the end product... I reckon that for molds you should do roughly 3:2 plaster to water ratio, and if you need it thiner for the details you may add a splash more but that will make the mold weaker. For usual use, for instance to be cast into a mold for a solid piece, the rule of thumb is 2:1 ratio PoP to water.
Am bangis
hi dear
if you are interested for some business in making jigs please let me know