Hey does that offer still stand? I would like to purchase one. I just unboxed mine and set it up after 2 years and want to do this Mod before the maiden. I'm in NJ.
Yeah great mod The other one is to run a rubber band around the main gear door spring (one that contacts the strut) through the little hole in the foam & up through into the nose to secure Apparently sometimes this‘spring’ can twist in the opposite direction & jam the gear doors..
Thank you for posting this. I just learned how to download 3D printer files and order the part online by uploading the files which is really cool. I just ordered my Avanti S today. I've always had kit built balsa planes with glow power but these EDF jets look too cool so I had to try one.
Hello, You wouldn´t have the 3D file of the piece? I just got my Avanti S and do not want to suffer the front wheel wobling. Greetings from Guatemala Many Thanks
I also had this same issue I guess like everyone else that owns this plane. That was the main thing I complained about when I first received mine. How does one go about getting a few of these made if you have no access to a 3d printer ???
I asked around till I found my friend, Jim. I asked Jim, my friend, if he would be willing to print off some for like $5 for people. Jim, my friend, said no. Sorry! Good luck hunting down someone or make one out of balsa ply
I've printed these many times now, can print as many as needed no problem. $10 shipped anywhere. Discounts for multiples. If you haven't found anyone else feel free to email me. painlesstom@comcast.net
Tom Frazier good question. Try searching www.hobbysquawk.com/forum/rc-airplanes/jets-and-edfs/66140-official-freewing-90mm-edf-stinger-90-thread or Thingiverse
David Douglass Hi , hopefully you had a great 4th ! I sent a message over hobby squak also but then I saw its been months since you've been on there . PayPal / vendmo work for me Thanks Randy
If you need one I have a couple, $5 to cover costs.
Oh that’s a little more than far. I glued it in using Gorilla glue, if you don’t know it’s a flaming glue, very strong for EPO foam.
Yes works great for me
How can i get one
COBRA HELICOPTERS INC. Dana Rabun email me at papadave418@yahoo.com
Hey does that offer still stand? I would like to purchase one. I just unboxed mine and set it up after 2 years and want to do this Mod before the maiden. I'm in NJ.
Yeah great mod
The other one is to run a rubber band around the main gear door spring (one that contacts the strut) through the little hole in the foam & up through into the nose to secure
Apparently sometimes this‘spring’ can twist in the opposite direction & jam the gear doors..
Thank you for posting this. I just learned how to download 3D printer files and order the part online by uploading the files which is really cool. I just ordered my Avanti S today. I've always had kit built balsa planes with glow power but these EDF jets look too cool so I had to try one.
Tom Akers glad to hear it. Put in a couple flights today, very fun plane to fly
Hello, You wouldn´t have the 3D file of the piece? I just got my Avanti S and do not want to suffer the front wheel wobling.
Greetings from Guatemala
Many Thanks
How did you adhere that piece in the nose well? Glue?
Gorilla Glue, rough up the surfaces
I also had this same issue I guess like everyone else that owns this plane. That was the main thing I complained about when I first received mine. How does one go about getting a few of these made if you have no access to a 3d printer ???
I asked around till I found my friend, Jim. I asked Jim, my friend, if he would be willing to print off some for like $5 for people. Jim, my friend, said no. Sorry! Good luck hunting down someone or make one out of balsa ply
Thanks for asking..
I've printed these many times now, can print as many as needed no problem. $10 shipped anywhere. Discounts for multiples. If you haven't found anyone else feel free to email me. painlesstom@comcast.net
Email sent.
Thanks, you should see it next week.
Sweet!!! Is something like this available for the Stinger 90? I am about to pull the trigger. :)
Tom Frazier good question. Try searching www.hobbysquawk.com/forum/rc-airplanes/jets-and-edfs/66140-official-freewing-90mm-edf-stinger-90-thread or Thingiverse
Hi
Do you still sell these ? Where do i send the $5 bucks ?
Randy
I think I have one more. I’m on vacation this week so hit me up around the 4th of July and I’ll send you the last one. The color is black just FYI
David Douglass Sounds good , enjoy your vacation ! Color no problem
Randy
David Douglass Hi , hopefully you had a great 4th !
I sent a message over hobby squak also but then I saw its been months since you've been on there . PayPal / vendmo work for me
Thanks
Randy
Sent you a note there
Wow your friend could have made some big money making these for people.
Anthony Thompson I asked him if he wanted to make some, but he wasn’t interested :/