2012 chrysler 300 v6 3.6L water pump replacement

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น • 14

  • @EME4MexicaWarrior
    @EME4MexicaWarrior 9 หลายเดือนก่อน +2

    I’m about to do this job later . At first I thought it was the lower hose but no I replace the hose and keeps leaking. The only thing that worry’s me is that last bolt at the very bottom where the crank pull is at

    • @ihacker1139
      @ihacker1139 9 หลายเดือนก่อน

      It’s actually fairly easy with the last bolt. I thought it was going to be hard too. The problem with me tho is that I overnighted one of the 10m bolts and snapped the head off. 😅 it runs fine tho and don’t see no leaks. I hope it stays that way.

    • @kenworkburton8324
      @kenworkburton8324 2 หลายเดือนก่อน

      Did that fix the leak ?

    • @EME4MexicaWarrior
      @EME4MexicaWarrior 2 หลายเดือนก่อน

      @@kenworkburton8324 yea I actually got it done . The car was sitting for almost 2 months cuz I had other issues like the throttle body fuel pump and fuel sending unit . Also I had to buy a new battery but it’s running fine now

  • @DOOPS70
    @DOOPS70 9 วันที่ผ่านมา

    Thanks man, definitely helpful gonna change mine this weekend.

    • @JaboTheMechanic
      @JaboTheMechanic  8 วันที่ผ่านมา +1

      Glad it was useful

    • @DOOPS70
      @DOOPS70 8 วันที่ผ่านมา

      ​@JaboTheMechanic thanks again, I didn't bother waiting i just did it and man you don't know how happy I am. Been having overheating problems for a minute and that water pump was the only thing I didn't change yet and I'm grateful. It's back up again. 🙏🏾💯💯💯

  • @dubtv6160
    @dubtv6160 9 หลายเดือนก่อน +1

    Very nice i love how you show everything and go into detail

  • @keenansalazar
    @keenansalazar 7 หลายเดือนก่อน +1

    This video saved my assss, thank you so much

  • @LawrenceHanson-b9s
    @LawrenceHanson-b9s 9 หลายเดือนก่อน +3

    Well could be a crack radiator like what I had a hairline crack and that was very expensive and there could be radiator hose that you don’t see until it gets to 200° and you turn off the key and it hisses out that’s another $50 for a hoseplus antifreeze oh my God that was another hundred dollars

  • @Smr402
    @Smr402 8 หลายเดือนก่อน +1

    Hellooo, i just saw your video on modifying a 2006 mercedes stereo to accept bluetooth, i was wondering where you were located and how much you might charge for a 2006 e350

  • @mickeygogo83
    @mickeygogo83 6 หลายเดือนก่อน

    So just curious if it wouldn't be easier to remove the rad fan to gain more room for the job? Or is it too much of a hassle to take out?

  • @tango0032
    @tango0032 4 หลายเดือนก่อน

    Idler pulley 16 mm torque is 41 ft lbs or is it 13 mm at 18 ft lb? I haven't started this project yet just making sure b4! Thank you.

  • @RichardSmith-ic1zw
    @RichardSmith-ic1zw 25 วันที่ผ่านมา

    I would just remove the radiator and the front end so i could get closer to the belt