Desk size 25x60 cm (10"x 24") Tires 1.9 100mm Dick Cepek Axles 4mm threaded rods Blue print drive.google.com/drive/folder... Ford Raptor build • SCX10 II Ford Raptor
A great trailer build video thanks. I'm halfway through my own design build. Your rocking centrally pivoting axial design is good. I'm keeping mine to 2 fixed axials to aid fore/aft stability of off centre loads....👍
Hello awesome build. I’m building a trailer similar to yours. The fenders you constructed. Did you make the angle iron out of flat stock. I haven’t seen angle stock in that dimension. Also what overall dimensions is the trailer. I think I’m making mine to wide. Thanks Alex
The wheels I found myself using grease on a washer and semi-permeant lock tight on the lock nuts to avoid wheels being to lose or locking up and the locknut from falling off. How did you keep your wheels straight and spacing right?
Hey man cool trailer! I just made my own same style. But I'm having issues attaching wheels to the threaded axle. How did you do it? I'm using 1/4inch rod. So drill holes in my rims to make fit. But don't like how unstable the wheels are. I can't make the bolt to tight on wheels or the tires don't spin. ? Do you have any tips or advice? The wheels are too wobly for my liking
How did you fix your wheels so they'll actually roll after filming the video? as they are now the nut will either fall off if moving forward or lock if moving in reverse?? Thanks
Thanks, I was thinking about making my own trailer. Found this really really helpful. Thanks. Also dropped a like. Can’t resist this perfection. Great job.
Thanks for sharing the blue print
A great trailer build video thanks. I'm halfway through my own design build. Your rocking centrally pivoting axial design is good. I'm keeping mine to 2 fixed axials to aid fore/aft stability of off centre loads....👍
Really nice build my man i appreciate the vid👍😁
Thank you this is so bad ass I’m going to make one today
Wow. This is amazing!
Great work! 👍
Wow, nice build!
Thank you!
Great build and video thanks
Thank you! Tips I needed! Awesome
good job!
Thanks for sharing bro 😎
Woww! !!...troppo bello !!!
AWESOME!!!
Dude this is so awesome! I am building one right NOW! You Will see it on my channel in a few days!
Thank you! I subscribed.
@@IllaesRCworkshop thank you! Your rigs are awesome!🤘
@@IllaesRCworkshop I got my vid online. Its almost finished
Amazing
Hello awesome build. I’m building a trailer similar to yours. The fenders you constructed. Did you make the angle iron out of flat stock. I haven’t seen angle stock in that dimension. Also what overall dimensions is the trailer. I think I’m making mine to wide. Thanks Alex
Slick!😄✌️👍
The wheels I found myself using grease on a washer and semi-permeant lock tight on the lock nuts to avoid wheels being to lose or locking up and the locknut from falling off. How did you keep your wheels straight and spacing right?
Nice trailer! Could you list the parts you used? And where you got them?
Hey man cool trailer! I just made my own same style. But I'm having issues attaching wheels to the threaded axle. How did you do it? I'm using 1/4inch rod. So drill holes in my rims to make fit. But don't like how unstable the wheels are. I can't make the bolt to tight on wheels or the tires don't spin. ? Do you have any tips or advice? The wheels are too wobly for my liking
Thumbs up!!!
Nice build!
what size C channel did you use for the deck frame?
Thank you! The C channel size is 13x10mm
Very nice build great work. Do you build any for sale like the one you built?
No, I made it just for fun. For money is too much work.....:)
ill buy it
Could you send me the plan details just a rough plans will do would love to build this and the single axial trailer as wel
I don't have any blueprint but I will make it for you soon.
Have uu made plans for this build
@@IllaesRCworkshop any chance on posting the build plans, measurements, details on the articulating axles and wheels?
@@superbazooka213 drive.google.com/drive/folders/1dy5v3PxBftJgYFxisXkttb1U4doengLN
How did you fix your wheels so they'll actually roll after filming the video? as they are now the nut will either fall off if moving forward or lock if moving in reverse?? Thanks
Yes they are rolling :) I used ball bearings instead of wheel hex and washers between the wheel and the wheel nuts.
What all the aluminum you need ??
How far in did you mount the wheels like where in between 60cm
Trailer blue print: drive.google.com/open?id=1dy5v3PxBftJgYFxisXkttb1U4doengLN
Where did you get the materials to build this awsome trailer? 🤙
Usually you can buy these in DIY stores.
How much did it cost you?
How many small and big wood slats did you use
Two 1 cm wide and eleven 2cm
What's the measurement form axles to axle
110mm
Blueprint with measurments: drive.google.com/drive/folders/1dy5v3PxBftJgYFxisXkttb1U4doengLN?usp=sharing
What wheels did you use?
Cheap Dick Cepek 1.9 tyres + rims from Ebay
Thanks, I was thinking about making my own trailer. Found this really really helpful. Thanks. Also dropped a like. Can’t resist this perfection. Great job.
?????