This is the Very Best explanation I have found !! Great Job !!!!!! I had not found the courage to try a tumbler yet and you just knocked it out of the park 🎉🎉🎉!!! Awesome!
Can the WeCreat do a full wrap on a 40oz Stanley Quencher? In fact can it do a full wrap on the tumbler you just did. I'm curious on this machine's ability to do a full wrap on curved surfaces.
Cool video. I do photo laser engraving on black marble using PhotoGrav's program. How does the diode laser work with black marble. I usually work at 300 dpi, but often go to 1000dpi.
Most will tell you that you can't engrave glass with the 20W diode laser - you need a CO2 laser (more power). However, I found if I spray on temporary black hair color and let it dry, that I can engrave glass. Have to play with power settings so not to overheat and cause micro-fractures, but I dialed-it-in and got good results. Cut glass engraving edges are a bit sharp so it needs to be sanded with emery paper to smooth it out.
Are you able to help a beginner with finding designs that are compatible with the softwear? Did you create the designs yourself? How did you remove the background of the design?
Hello! This laser diode is DIY to see on your vlog, I hope i could follow you in the future ‘coz i am looking to invest one too a diode business. May i know How many tumblers or is there a minimum tumblers to make in a day?
I haven't tried but I will research. I know there is a height limit around 6" and I think a basketball would be too tall..I will post if I figure out a way.
Thanks for the video! I have one arriving today! We use two two other engravers and wanted to add this one to out group as well. Thanks again!
Can you please do a 40oz full wrap Stanley please!
Yes I am planning on trying.tgis and posting a vid!
I'm looking into investing in a laser printer. Your cup turned out awesome!
This is the Very Best explanation I have found !! Great Job !!!!!!
I had not found the courage to try a tumbler yet and you just knocked it out of the park 🎉🎉🎉!!! Awesome!
Your video just cost me $1500, had to get one ordered. Great video and explanation on how it works
Great video! What settings do you use?
Can it do plastic like 3d prints like the lids
Can the WeCreat do a full wrap on a 40oz Stanley Quencher? In fact can it do a full wrap on the tumbler you just did. I'm curious on this machine's ability to do a full wrap on curved surfaces.
Hi I just purchased a tumbler to test this...I am hoping it turns out great and will be posting a video.
Hi I just purchased a tumbler to try and see...I hope it's turns out well and will be posting a vid!
where do you get your supplies
How did you get to the speed , line density and passing?
Is the vent piping included or have to purchase separately?
Hi the vent piping is included.
will this laser cut 1/4" sublimation hardboard without a lot of edge burning??
Hi I have had great results with 1/4" real woods and plywood. MDF board will not cut thru without edge burning for some reason.
What if the tumblers is tapered? How does the WECREATE software correct for that?
Cool video. I do photo laser engraving on black marble using PhotoGrav's program. How does the diode laser work with black marble.
I usually work at 300 dpi, but often go to 1000dpi.
Hi I will have to test the black marble...maybe a future video on that.
Can it engrave on glass such as a wine glass?
Yes I think it does but I haven't tried this yet...future video tho for sure.
Most will tell you that you can't engrave glass with the 20W diode laser - you need a CO2 laser (more power). However, I found if I spray on temporary black hair color and let it dry, that I can engrave glass. Have to play with power settings so not to overheat and cause micro-fractures, but I dialed-it-in and got good results. Cut glass engraving edges are a bit sharp so it needs to be sanded with emery paper to smooth it out.
Hi I do not have the word edit next to the we creat logo , anybody have a problem with that
Are you able to help a beginner with finding designs that are compatible with the softwear? Did you create the designs yourself? How did you remove the background of the design?
Hello! This laser diode is DIY to see on your vlog, I hope i could follow you in the future ‘coz i am looking to invest one too a diode business. May i know How many tumblers or is there a minimum tumblers to make in a day?
Where is the best place to buy tumblers and other products to engrave?
Love the video but I have a question can you engrave on a basketball with that machine? I really want to buy one.
I haven't tried but I will research. I know there is a height limit around 6" and I think a basketball would be too tall..I will post if I figure out a way.
@@AppalachianHomeCowhat if it was deflated
hablas español
Don't use WiFi if your signal is spotty