Building My Vaydor G35 Supercar Exotic (Pt. 5) Doors, Doors, Doors.....Roof Wing and More!

With Plenty of itchy fiberglass, smelly primer and sanding dust to go around, the build is moving along. We dive really deep into the roof wing and doors on this one as there are a lot of things going on to get these parts where they need to be. Grab your favorite movie snacks, drinks and enjoy the show!
0:59-Intro
3:23-Bonding Under Rocker Panmels
5:04-Roof Wing
41:50-Continuing Door Mods
1:06:01-Back To the Passenger Door
1:27:56-Important Notice About Door Latches
1:29:40-Back to Some Door Wiring

[@colinnely]

Hello again! I must say, it looks absolutely excellent and just like last time, great work 👍

[@latenightdiy1496]

Thank you! Cheers!

[@umustwantme]

When u clicked on your 1st video (of this series), i didnt expect to 5 videos in by 1:30. Youre attention to detail really makes this build interesting. This is keeping me distracted enough to actually sit on my @ss, and recoup after a rough work week!

[@latenightdiy1496]

Hopefully you're still enjoying them! Part nine will be out soon!

[@jonathansimmons6452]

I would’ve threw a LS1 and turbocharged it. With a 6 speed transmission.

[@latenightdiy1496]

Im not messing with drivetrain stuff yet but a good friend of mine is probably gonna set me up with an LS eventually.

[@TheSidekickking]

Hello, how much will it cost just to mold all the exterior parts? Mine is alright cut in half and cage is welded.

[@latenightdiy1496]

Man I would really have to see what you've got going on. It's tough to give an accurate estimate without seeing it. Also the cage shouldn't be welded if the body hasn't been set on and properly marked for the exact position. Did you add me on instagram last time I replied to the comment?

[@ashton6836]

Hello! I am currently in the process of building my doors as well but I am really struggling with the regulators. We have it cut very similar to this but when we roll the window up and down the wires get bird nested. We clamped them down when we cut and adjusted and we made sure there was no wire interfere. Have you run into this problem as well or is there something I may not be doing correctly?

[@latenightdiy1496]

As far as electrical wires, they should be completely out of the way but if you are talking about the cable getting bird nested, you may not be welding the pully at the proper aligning angle to make sure the cable is riding on the pulley properly. I'd really have to see it to tell but hope you get it figured out.

[@ashton6836]

@@latenightdiy1496thank you, we did and am now at the painting stage!