ไม่สามารถเล่นวิดีโอนี้
ขออภัยในความไม่สะดวก
Tyger T1 Soft Roll Up Tonneau Cover Install & Review
ฝัง
- เผยแพร่เมื่อ 16 มิ.ย. 2019
- #bedcover #silverado #truckupgrades
More Videos On Amazon - www.amazon.com/shop/influence...
I install a Tyger T1 Soft Roll Up Tonneau Cover on my 04 Silverado. Below are links to all makes and model Tonneau covers. Look below to find yours.
88-06 Silverado 6.5' bed Cover - amzn.to/31Hc4eO
07-14 Silverado 6.5' bed cover - amzn.to/2Xmffci
Dodge Tyger Tonneau covers - amzn.to/2Zz9Jke
Ford Tyger Tonneau covers - amzn.to/2KWKX9x
Toyota Tyger Tonneau covers - amzn.to/2IOIz1Y
Nissa Tyger Tonneau covers -amzn.to/2FeLFeo .
*Disclaimer: This video description contains affiliate links. That means that I am awarded a small commission for purchases made through them, at no added cost for you.
My man. This is exactly what I needed. My wife got one of these for our daughter’s truck and I had to install it before she woke up. You saved Christmas in my house. Thank you brother. 💪💪💪
The best video I have watched on bed covers. Straight and to the point with great tips on installing it... 👍👍👍
Took me a couple tries to get it lined up properly on my truck, too, but when it was done, it looked really good on my truck!
Good job, sir!
Haha glad I watched till the very end, I was going crazy thinking you left the weather strip hanging over like that 🤣 looks great man!
Great video guy , Liked that you did it all over again and putting the 3m strip on it. I ordered mine on EbAy for 140 so coming back to see your video.
Great video..couldnt figure out what I did wrong until I watched this..put the two side rail pieces on backwards ..have to flip them around and switch sides..i guess like a wise man told me its better to spend twice as long planning something then it is actually working on the project itself..like I said great video helped alot..
Thank u Ryan your video was on point very detailed help me a lot the directions that came with tonnea cover are hard to understand again thanks. Installed it on 2018 Toyota Tacoma I love it.
Nice will look at this option for my next one on my 2002 Tundra. Like the way this one folds.
Should be getting one these covers delivered today. Thanks for the video!
How did it turn out Kyle? Is it holding up well?
@@jessemccarthy05 I am very happy with the cover so far. For the price it's hard to beat. I would recommend it.
Thanks for the video. Just purchased one of these covers off Amazon for my F-150. Seems like a nice easy install and the shot at the end does make it look real good!
Its still on the truck and looks as good as it did when I installed it. You will probably like yours as well.
@@Fentertainment Then you should sell it. Nothing's wrong with it, but Roll N Lock is better.
Glad I watched your video, I didn’t know how to install the bulk head part, even with the instructions that came with the product showed any detail I had to connect it to the rail and attached it with a screw , I seen the screw but didn’t know 2&2 went together, I was gonna return it
Whoever had that truck really kept it clean for an '04. Installing my cover today!
Yeah it wasn't too bad. It was a local power utility vehicle. It had 3 boxes on it.
Great video, very informative and to the point. Thanks
3:33 was easily the best part of this video!! Thanks for sharing man, now on to install mine!
You didn't think I was gonna leave it like that did you.....then again ive seen some questionable things on youtube.
Awesome cover!!!! I’ve had mine on for 2 months now. Let me tell you, I can go through a car wash and my bed stays bone dry. All my expensive covers over the past years leaked like a sieve. Thanks for the video. 👍
Still have mine as well and roll it out today to use.
Thanks for the video, was looking into a roll tonneau cover. Is great that it locks as well.
Looks really nice and fits well. That's a clean ol' truck.
Thanks man. Trying to make it me.
thanks for this just bought one bout to set it up!
Looking great bro! Good job!
Thank you, Huge Help , worked out great
Thx!!! This video really helped, I appreciate it!
Awesome!
Good video my man. Thanks
Sir thank you for showing me how to open the cover. Saved my ass a headache
the best video amazing thank you 😊
You should push down on the cover when unlatching. Makes unlatching easier but more importantly it is easier on the latches. Over the long haul your latch ends will degrade if you continue to unlatch without pushing down on the cover. Thanks for the video.
Seems simple enough...thanks for the help!
Yesser, almost 2 years since I made this video and its still going strong
Putting one on my rig soon . Thanks Brother .
After all these years its still on the truck and my oldest uses it in college.
Excellent tutorial, show how easy it was to incorrectly install, & how easy to correctly install. I had an ‘04. But my cousin was out of a vehicle & desperately needed a truck, so.... @ least it has a good home.
Lol.
Just ordered. Very helpful video. Answered all my questions. Laughed at the sound the guy makes when he installs the weatherstripping. “Mehhhh.”
Bahahaha
Nice truck
Really enjoy your channel. 3:33 made me laugh. Looks like something I would say.
lol. appreiate it
Shit, made me laugh too!
I got mine in the mail today. This is the 1st video I've watched about it and you make it look pretty easy. I hope mine goes that well. Question though, how long did it last? Hot and cold weather, I live in Oregon, it's raining right now or I would be installing it right now. Thank you for the video.
Thx for the review just order mine I have the same truck
Ten4, Its still holding up fine! I havent had to even adjust it yet.
I just installed Lyon soft roll tonneau cover on my Jeep and for $170, no complaints.
They make covers for those post holes on the top of the body sides. Nice looking tonneau cover. I like the way it is installed over the edge of the bed, not like some that are inside the bed and thus reduce the width of what you can put in the bed easily.
I wasnt talking about the stake pocket holes. The previous owner drilled into the top of the bed rail of the truck to mount the tool boxes. I think I only added a couple seconds to show that.
Good looking out! I’ve been looking for a cheap one to install just for a little extra privacy when I’m at Walmart etc. I don’t keep anything worth stealing but hey 🤷♂️ people these days you never know. But thanks for the video
I agree 100%
Great video, I just order one for my 2021 Tacoma and can’t wait too install 😁😁
I just installed on on my Nissan but mine has a little jumó on one of the cross bars
Hopefully it smoothed out later as time goes on
I'm torn between the Switchblade and Bakflip MX4.
Soft tops aren't an option at this time, due to theft. I know a hard top can also get broken into, but it's more work than a Razor Blade Slice and sometimes thieves don't want more hassle, so chances are, they will move on once their is a hard target.
Great video and thanks for Sharing 😊
Paid $180 on Amazon, super easy to put on, I recommend using vice grip on bottom bolts and 10mm socket on top.. couldn't find my drill adapter so had to use elbow grease. My last cover blew off but this one ain't going anywhere..!!!
I have something like this in my truck I love it, when it snows I roll it up to keep the weight off but most the year I use it. People like to throw their trash in the back of people's trucks 😠
Thank you!
I had a truxedo once, this thing is identical
How did you get it tight. Mine is extremely loose and sagging with the lock tight...
I have one of these, very happy with it. Has anyone had the cover unlock while going down the road? Mine does often, I do see adjustment tabs where the cover attaches, do I have it too tight or too loose?
I have a good sized gap at the end of the tailgate afraid water or spiders might get in. Is yours flush sealed or is there a slight finger sized gap at the end of your tailgate?
Thank you
I have a 2008 Toyota Tacoma I believe it’s 6 foot long bed is yours the same length??
Does it fit my Chevy 2002 LS single cab it’s a 6,6 I believe
I have a 1997 k1500 extended cab short bed which one do I neef
any updates 3 years later?
👍👍👍👍👍👍 heck yeah
Wat size is a short bed 2003 Silverado??
4:09 could not miss the famous phrase: "that's not gonna go anywhere" 🤭😁
Bahahaha
am wondering what the width of the cover is? I realize that this video is a couple of years old. I am trying to find a tonneau that will fit behind my 27" wide tool box. I have a full size bed with the open space measuring 68.125 (L) x 64.25 (w). Would be grateful if you can provide the width measurement of your cover. Thx. bg
Not sure if there's a reason for sticking weather stripping to truck but I've always stuck it to the tonneau frame easier on paint
That is a good idea!
I like that cover, good video on installing it. I have a quick question. I just picked up a truck just like yours but the GMC version. The tailgate on mine has the exterior door tailgate handle shaved off and relocated to the inside of tailgate, so when i want to open up the tail gate I gotta do a reach around to the inside to open it. I noticed in the video you can access the inside of the bed through the sides without having to unlatch the end part? is that possible?
No. You have to be able to get to the inside of the cover in order to open it.
@@Fentertainment ahhh I see, gotcha
Still have it? How's it holding up?
Have one on my Tundra. Can only tighten so far. Can’t go past the second line and it flaps too much.
Sean Sullivan you don’t like it on your Tundra? I’m thinking of getting one for my 2008 Tundra.
What size bed is that?
Looks like it’s pretty decent quality and an easy install! How’s it holding up after rolling/unrolling many times? I currently have a button tonneau cover with 3 supports that go across the bed... Pain to take on and off, especially in the cold. Not to mention the cover is from 2004... Looking for something cheap and easy to roll up and back down. I haul dirt bikes often and like to have the bed covered when I’m not using it.
Surprisingly i had the same question before i ordered it but noone was there to ask. I did this video in june of 19 and its almost one year. I will be doing a update video on it. The cover has been great and has given me zero problems so far. It gets hot here in sc and i thought skmething would happen but nothing so far. It hasnt stretched yet either. Im pleased with the cover so far.
Fentertainment Awesome, thanks for the update! I’ll be looking for that update video!
@@Fentertainment you should add that to the beginning. Your title says install and review. But you didn't really give it a review. It looks good though.
Just got mine for my Nissan frontier, I'm happy but my stepdad thinks somebody will always cut into it. Mostly got it for cargo that shouldn't be exposed to the elements, and to keep people from throwing garbage in my bed
I was scared for the same exact reason, however no one has messed with it. Been just over a year since I got it and still going strong.
The cover looks great. Any update on how it's holding up? thanks
I might make a update tomorrow on it for you and upload it as a story. However I dont have any problems with it till this day.
@@Fentertainment Good to hear. I'd love to see an update video.
@@michaelsnively3621 I added a shorts video, I tagged you. However here is the link - th-cam.com/video/_WYZuXdv_CA/w-d-xo.html
I have their tri fold soft on my 18 Sierra. Couldn’t ask for more, especially considering the price!
How’s this holding up? I’m looking to get one for my 2008 Tundra Crew Max. Can someone get into it by pulling up the sides/unvelcrowing it?
Its doing surprisingly well. Its not the most secure cover and the sides are tight. If someone wanted to get into it they could so easily by just downing the tailgate if its not lockable. The sides are semi tight, however someone might can get their arm into the cover but not much more. It keeps everything dry in the bed as well.
Just installed mine last night when i open the cover it doesnt flip open like yours, maybe because i installed it when it was cold its not gonna fly off because of that right? Lol
You really should be pressing down on the cover when unlocking. Makes unlocking easier and is easier on the latches.
I'm buying one for my tundra but I was going to pull the trigger on the tri-fold version on amazon. The only reason I didn't like it is because only 3 out of 4 sections fold back leaving a good chunk unfolded. This roll up version seems ike I could roll it pretty much all the way back when not in use. Can someone share their thoughts/opinion on the matter?
Thats why i went this route. Its still going strong also.
Why do my clamps look so different? Much smaller
How's the bed cover holding up ? The product on the link says its for 07-13 new body style . Is that the one you got ? I have an 06 Silverado. Wondering if it'll still fit.
Still holding up, i was going to make a update on it but havent. Im still using it and rolling it up and down. The link must have changed, i bought the 99-07 year range. I thought i listed multiple links for all type and year model trucks.
@@Fentertainment you did list , I clicked the one for your truck but it popped up for the 07-13 years. So I'm guess thrye probably don't sell it anymore. I was going to buy it . Lol ill just keep looking.
@@thatvegashighrisedude2757 ten4.
pop&lock for tailgate about 40.00, just curious how it'sholding up? I'm just now researching covers looks real nice for price point.
Still doing great tbh.
@@Fentertainment Thanks reply. I put that lock on my tailgate works good google it..now i need a cover lol.
@@kc8ljmcopier567 I might do that!
How’s how’s the cover holding up over the years?
I made a video short this past spring to another reply and its still on the truck. th-cam.com/users/shorts_WYZuXdv_CA
Also put the weather strip on BEFORE installing anything.
So, is Amazon product ? .
What’s size bed is that please let me know!’
Mine is a 6.5' being extended cab
Which one do I get for a 99 Silverado single cab short bed?
Must be a 6.6ft cover includes extended cab and single cab short bed
Every the ad says it is!
Does this fit a 2000 Chevy Silverado 1500?
Yes.
any water from rain get inside ?
5 years later the only issue I have is the velcro isnt as strong.
What size bed did you order
6.5'
Update on the cover? Is it still intact?
I did this update a couple weeks ago. Nothing has changed. Still good to go. th-cam.com/users/shorts_WYZuXdv_CA?feature=share
Where did you get the rubber bed mat at?
it was in the truck when I bought the truck.
@@Fentertainment Oh ok cool, well thanks for the reply back and thanks for all your great videos I will buy that bed cover for my 02' Chevy it's easy to install and cheap in price
What wheels are installed on your truck sir?
They are factory takes offs from an 18 silverado.
@@Fentertainment thank you
What size is the bed cover for that truck??
6.5, I put a link to it in the description. Still have it and its still strong as day one.
@@Fentertainment awesome thanks for thr reply. I am wanting to put one on mine very soon👍
You’ve had a year now. How has it worked
Almost 2 years and its still going strong. I havent had any problems with it. I rolled it up this past week to load the bed of the truck and rolled it back once I was finished. Nothing has broken, The vinyl hasn't torn or ripped. Its still just as dry as the day I installed it.
just installed mine. its so freakin tight you have to struggle to get it to latch. and because of the tension it bows up off the top of the gate. pissed!!! $230
Did you try adjusting it?
@@Fentertainment yea its at the shortest setting. im experienced in building things its all parallel and square. the material is cut short. im a strong guy and it takes nearly all my might to get it engaged. the extruded aluminum end is lifting its so tight. im hoping the Florida sun will relax it but theres an inch gap at the top of the tail gate because its flexing. i can disassemble it and cut the rail a quarter inch but i paid for a new unit not some crap i have to fix out of the box. lets see if i will return it or not.
2 year update??
I did this update a couple weeks ago. Nothing has changed. Still good to go. th-cam.com/users/shorts_WYZuXdv_CA?feature=share
Bought this and was hype to install it just to find out it wasn’t wide enough the the side rails didn’t sit evenly…ruined my day….🤦🏾♂️🤦🏾♂️🤦🏾♂️
ahhhh yes, when you use to be able to reach the inside of the bed standing on the ground
I absolutely hate the one I have on my truck, I wouldn't personally recommend the soft covers, but to each their own.
What do you hate about it?
@@Fentertainment The velcro actually working doesnt last very long (at least on mine). The locking mechanism is a bit different and it is really hard to u lock and roll up. The one I have you have to push down on the top of the cover to slid a button back to unlock it.
@@kaylac8287 Gotcha, Is there a way to tighten or loosen your cover to make the velcro work again?
@@Fentertainment unfortunately no, it's just the velcro not sticking. I don't use it that much and it isnt very old either. :/ it may have just been a bad make, as others will probably have better luck with the roll top cover
@@kaylac8287 ten4
I’m late to the party but please remove your side moldings .. great install tho
They are now gone. I colormatched the grill & bumper pad along with some escalade handles & tailgate handle. It needs a drop kit or to be bagged.
Take that pink shirt off and get a lime green one😂