2013 kia soul radiator coolant fan replacement tips.
ฝัง
- เผยแพร่เมื่อ 16 ต.ค. 2024
- I changed my coolant fan and had to manhandle it to get it out, but there is a much easier, and safer way, my video shows you how. Thanks for watching, and i hope it helps.
![เปิดใจ "อาจารย์เบียร์ คนตื่นธรรม" อดีตเคยสุดทุกทาง ถ้าใช้หนี้หมดไปบวชแน่ l [Nickynachat]](http://i.ytimg.com/vi/IxeE0xVhy08/mqdefault.jpg)
Hey bro, go through the bottom.
1.) Disconnect the upper radiator hose junction (3x 10mm head)
2.) Disconnect plug from car to resistor in (helps to have a long screwdriver to push while pinching, if melted, fix that first)
3.) Disconnect burp tank
4.) Pop transmission lines off of fan housing
5.) Lift front of car (the further the better)
6.) Take 2 drivers side front skid plate bolts out (10mm head)
7.) Slide fan assembly off of bottom alignment clips
8.) Rock and rotate clockwise while moving trans lines out of the way.
9.) It'll get tight a couple times but should pop right out of the bottom, burp tank last.
10.) Reinstall, and drink beer.
I couldn't find a video either, this way took me 40 or so minutes.
This one ate the resistor, so I put in a new one, then turned slow, (to the untrained eye it seems like a normal, low-speed), then it popped the fuse, so I went whole-hog.
I also got some alligator clips and grounded the furthest up (only green on connector) then juiced the opposite side and compared speed. You'll only need to tap the other alligator clip, don't clamp both. We set both on the engine and fed them power to compare speeds. The old one would spin slow and hardly freewheel, the other took off and freewheeled. Not a huge difference side by side, but enough to ruin someone's day.
now you sir are MVP. thank you. i love checking the comments lol. took me like 20 mins
Thank you. When I did this, there were literally no videos on it, so I knew there was probably a better way, I just didnt know. One of the best cars I've ever had, and I've had many.
These instructions were money!! Thanks to both of you!
Thank you about to do this this weekend
Thank you so much for sharing! I need to change out my 2011 fan. Thank God for youtube!
2012 will not come out the top without removing the intake. Comes out the bottom without much struggle. Took 2 hours since I thought it would come out the top. No more overheating while idling!
Sir this video literally saved my ass. Thank you so much.
Good video, answered all the questions I needed to know.. 👍👍💯
Thank you
Thank you for this information. Checked my fuses and relays ( jumped relays no help). With A/C on fan should work. Turned fan blades quickly by hand with key in start position ( engine off ). Fan started but very slow. I will change fan assy. ($95.00 local ).
I did it last night on a 2018 Soul , took off the intake manifold. Not too bad a job. The lower radiatator support and the AC compressor blocked taking it out from the bottom.
Me quedé esperando que sacará el abanico 🧐
Dont know what you said, but I hope it helped!
@@lakerssuk He said the same I told you man. Stay waiting for you to take or remove the fan. You see? The video is absolutely wasting of time
remove headlights ,bumper and upper radiator support and your a done
you did nothing. I thought you will do a video.
--- remove this, remove this, and this. That's it. very easy.
@@HeydaCarreras I'm sorry if this wasnt helpful, I'm sure there are plenty of other videos that will show you how to unscrew a screw.
@@lakerssuk So, are you trying to say I don't know, or I can't remove stupid things like a screw? screw you
you did nothing. I thought you will do a video.
Did nothing? I told you step by step what to do lol.
@@lakerssuk Come on. Do you call that a video? talking and talking with no showing anything how you did it? Step by step? WOW. are you ok? any problem with your brain?